Leak Blower Regular Starter Parts

This cooling fan assembly mounts inside the oven housing and circulates air to prevent the control panel and surrounding cabinetry from overheating during use. It typically runs during and after the oven's heating cycle to dissipate excess heat. Replace this assembly if the fan is noisy, doesn't spin, or if your oven's electronic controls are shutting down due to overheating.

Fix a squealing or wobbling dryer with this blower wheel housing assembly. Includes wheel, housing, and cover. DIY install in 20-30 minutes.

This small electric motor mounts beneath the microwave floor and drives the turntable tray, rotating food during cooking for even heat distribution. It connects to the glass tray via a coupler or roller guide. Replace this motor if the turntable stops rotating, turns intermittently, or makes grinding or humming noises while the microwave is running.

This is the blower motor used in the downdraft ventilation system of a range. It powers the fan that draws smoke, steam, and cooking odors down and away from the cooktop surface. Replace this motor if the downdraft vent makes unusual noises, vibrates excessively, runs intermittently, or fails to turn on at all.

Fix a range cooling fan that won't shut off or makes howling noises with this motor. Requires removing oven from cabinet and back panel access.

Start relay for refrigerator compressors that helps the compressor begin running at power-up. Replacing a failed relay can restore normal starting behavior and resolve common startup symptoms. What it does

• Provides the initial start current path to the compressor during startup.
• Allows the compressor to reach running speed, then drops out once the motor is running.
• Common symptoms a bad relay may cause: compressor clicking, humming without starting, intermittent cooling or frequent cycling.
• Installed as the electrical component used only on compatible compressor assemblies.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Access the relay at the compressor; remove and replace the relay only after confirming diagnostics.
• Dispose of the old electrical part per local regulations.

Fix a microwave turntable that won't rotate with this motor replacement. Solves spinning issues when motor receives power but fails to turn the tray.

Microwave tray not rotating? This turntable motor spins the glass tray for even heating. Fixes tray rotation issues and reduces cold spots in food.

Fix a refrigerator that won't start or hums but doesn't run with this compressor start capacitor. Restores reliable cooling when the compressor fails to start.

This rotary on/off switch controls the dryer's Finish Guard (also called Wrinkle Guard/Wrinkle Shield) feature. Replacing it restores proper control of the post-cycle intermittent tumbling that helps reduce wrinkles, preventing the feature from being stuck on or off.

• Provides 2-position on/off selection for the Finish Guard/Wrinkle Guard function
• Failure can cause the feature not to engage or to stay on after the cycle ends
• Knob may feel loose or fail to click when the switch is worn
• Mounts in the control console and interfaces with the external selector knob

• Disconnect power before servicing
• Access through the control console; remove paneling as needed
• Transfer wires one at a time or photograph connections for reference
• Reinstall using the existing knob and mounting hardware

Fixes burner that won't heat or stays on one temperature. This infinite switch restores variable heat control to your cooktop surface element.

A replacement fan (blower) that restores airflow in compatible Bosch appliances to support proper cooling and ventilation. Installs in the appliance's air path to help maintain temperature balance and reduce strain on other components. What it does:

• Circulates air through the appliance to support cooling and ventilation.
• Helps cool motors, heating elements, or evaporator areas depending on the model.
• Common symptom relief: reduces overheating, improves cooling performance, and can stop abnormal fan noise when the original fan fails.
• Prevents related faults caused by insufficient airflow when installed correctly.

• Always disconnect power to the appliance before starting any repair.
• Handle the fan blades and motor carefully to avoid damage; avoid forcing connectors or mounting points.
• After installation, test the appliance functions and listen for normal fan operation; if unusual noise persists, re-check mounting and clearance.

This run capacitor helps the refrigerator compressor start and run smoothly, restoring normal operation when a weak or failed capacitor causes the compressor to struggle. Replacing a faulty capacitor can reduce humming and improve cooling performance. What it does:

• Provides continuous phase-shift to the compressor motor for stable running.
• Helps maintain proper compressor speed and efficiency during operation.
• Commonly replaced when the compressor hums, won't stay running, or cooling is inconsistent.
• Reduces risk of repeated motor cycling caused by a weak or open capacitor.

• Always disconnect power to the appliance before accessing electrical components.
• Discharge the capacitor before handling; capacitors can hold a charge even when powered off.
• Observe terminal orientation and mounting location; replace with the same type and ratings.

Microwave making loud buzzing noise during operation? The high voltage transformer converts power to the magnetron. Moderate DIY repair, 1-2 hours.

The Blower Tangential 45mm is an OEM part for GE gas ranges. It is the convection fan that circulates heated air within the oven cavity during convection cooking cycles.

Symptoms of a bad blower tangential include:

• Lack of airflow inside the oven
• Uneven baking and roasting results  
• Inability to select convection cooking modes

Causes of failure can be worn bearings, burned out motor, or damage from excess heat over long-term use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models. 

Microwave runs but won't heat food? This high-voltage transformer powers the magnetron to generate heat. Restores cooking function when failed.