Keypad Parts

The Touchpad Control Panel is an OEM part for KitchenAid dishwashers. It allows the user to select different wash cycles, adjust settings, and activate specific features of your dishwasher. It measures approximately 24” in length and is black in color.

Causes of a faulty touchpad control panel can include wear and tear over time, accidental spills or damage, or electrical component failure. These factors can result in unresponsive buttons, erratic behavior, or the inability to select or adjust settings properly.

Symptoms of a bad touchpad control panel may include:

• Unresponsive or non-functioning buttons
• Erratic or inconsistent response to touch inputs
• Incorrect or missing display information
• No LED display

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This black clock plate is the trim and mounting plate for the range or wall oven clock/timer in the control panel/backguard. It restores a clean, finished look and helps position and support the clock assembly securely.

• Provides the mounting surface and finished opening for the clock/timer module
• Helps align the display and protect surrounding panel edges
• Replace if cracked, warped, missing, or heavily discolored
• Typical symptoms include a loose or misaligned clock, rattling, or visible damage around the display

• Disconnect power at the breaker before servicing; allow the appliance to cool
• Remove the control panel/backguard to access the clock and plate
• Transfer the clock/timer to the new plate and reuse existing hardware
• Align carefully and avoid overtightening to prevent damage; verify display alignment before reassembly

This control panel assembly replaces the appliance's user interface. Installing a new panel restores reliable button response and a clean, factory look so you can select settings, time, and options with confidence.

• Provides the button/touchpad area and display window you use to operate the appliance
• Sends key presses through its ribbon connector to the main control
• Common symptoms: unresponsive or intermittent keys, stuck/beeping keypad, or a cracked/worn panel face
• Restores proper console alignment and secure mounting

• Disconnect power at the breaker before servicing
• Remove trim/console screws; support the panel and transfer any clips, screws, or attached components from the old assembly as required by your model
• Handle flat ribbon cables by their connectors; avoid creasing and ensure they are fully seated/locked
• Test all keys and functions before final reassembly

This is a Whirlpool range control panel. It houses the display, user interface buttons, and has space for temperature control knobs. With extended use, the buttons on a control panel may wear out or stop responding to user input.Before installing this part, be sure to cut power to the appliance and allow it to cool completely. The stove may need to be pulled away from the wall to access the screws holding the old control panel in place. Remove the screws from each side of the old control panel to disconnect it, then carefully remove any boards or other components installed within the panel. Once it has been completely removed, the new control panel can be installed in its place.This is a genuine OEM part compatible with ranges manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product is just the panel and contains no additional parts or hardware.

This touchpad and control panel assembly restores a responsive, reliable user interface for your appliance. It provides the keypad membrane and front panel that register button presses and send commands to the electronic control.

• Provides the user interface to select functions and settings
• Membrane keypad and ribbon/connector transmit inputs to the main control
• Worn or damaged keys may cause unresponsive or intermittent buttons, stuck-key beeping, or inability to start/stop
• Cracked or damaged panel face can prevent proper button operation

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the console; release the keypad ribbon by lifting the connector lock—avoid creasing the ribbon
• Transfer any brackets/trim from the original panel if required; align and secure the new panel
• Fully seat the ribbon and test all keys before final reassembly

This replacement control panel and mounting bracket assembly restores a secure, like-new stainless front to the appliance's control area, providing proper support for the user interface components and a clean, factory appearance after dents, cracks, or corrosion. What it does:

• Provides the structural fascia and support for the control area
• Restores proper alignment for buttons/knobs and display openings
• Replaces dented, cracked, or bent panel/bracket components
• Helps eliminate flexing or wobble when using the controls

• One stainless steel control panel and mounting bracket assembly

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; sheet metal edges can be sharp
• Transfer existing control components and hardware from the old assembly to the new one
• Photograph fastener locations and wiring before removal; align panel before final tightening

This control panel overlay replaces the printed graphic that identifies the keys on your appliance's control panel. Swap a worn or peeling overlay to restore clear, readable settings and a clean, factory look.

• Provides the printed labels and icons for the control panel buttons
• Maintains a clean, finished appearance on the front of the appliance
• Typical replacement when the original overlay is worn, cracked, bubbling, discolored, or unreadable
• Helps ensure correct button identification after cleaning chemicals or heat have damaged markings

• Disconnect power before servicing and removing the control panel
• Remove the control panel face, then carefully peel off the old overlay; clean the surface of any residue
• Align the new overlay using the window cutouts/markings and apply smoothly to avoid wrinkles or trapped air
• Reassemble the control panel and restore power; button labels align correctly

Replace a cracked or unresponsive front panel with this black control panel assembly. It restores the appliance's user interface so you can select cooking modes, set temperatures, and operate timers with consistent, reliable button input.

• Provides the front interface for selecting functions and temperatures
• Aligns and supports the keypad area and interfaces with the electronic control on applicable models
• Transmits button presses to the control so cooking functions can start
• Common symptoms: non-responsive or intermittent keys, stuck/shorted keypad errors, or a cracked/damaged panel

• Disconnect power at the breaker or unplug before servicing; allow the unit to cool
• Remove necessary trim and mounting screws; support the panel to avoid straining wires
• Transfer the existing electronic control/clock and any brackets or hardware from the old panel as required
• Seat ribbon/flex connectors fully and handle carefully; do not overtighten fasteners

This replacement control panel restores a clean, finished look to your appliance's console area and provides a sturdy mounting surface for the user interface. It helps protect internal components and keeps controls properly positioned. What it does:

• Forms the exterior face and mounting surface for the console/backguard area
• Shields internal wiring and components from heat, spills, and impacts
• Keeps buttons, knobs, and display openings aligned and secure
• Common symptoms: dents, cracks, broken mounting points, loose or warped panel, controls not sitting flush

• 1 control panel

• Disconnect electrical power at the breaker or unplug the appliance; shut off gas supply if applicable
• Wear cut-resistant gloves—panel edges can be sharp
• Remove console/backguard screws, then transfer any brackets or clips from the old panel to the new one
• Tighten mounting screws evenly and confirm control alignment before restoring power

This control panel overlay restores the labeled clock/timer area and button markings on your oven or range so the display and controls are easy to read and use. It replaces a cracked, faded or worn clock overlay for a cleaner finish. What it does:

• Replaces the worn or damaged clock/timer graphic area on the control panel
• Restores button labels and display visibility for accurate clock and timer operation
• Improves appliance appearance by covering scratches, discoloration, or peeling
• Helps prevent dirt and moisture from contacting the printed control area

• Designed to fit the original location; inspect mating surface and alignment before final placement
• Remove power to the appliance before starting any work to avoid electrical shock
• May require removal of the control panel or trim pieces; keep screws and fasteners organized
• If adhesive is used, ensure the surface is clean and dry for proper adhesion

This part is a replacement control panel assembly. This part can be used to replace a broken or defective control panel in a variety of oven models. The control panel ensures the user can properly and safely adjust and maintain the oven temperature and settings. The appliance may not work properly, if at all, if this part is broken in any way. Thus, it will need to be immediately replaced. Always disconnect power from the appliance before starting any work or repairs. It is recommended that work gloves are worn to protect the hands.This is a genuine OEM part made by GE and has been sourced directly from the manufacturer. As an authentic replacement part, this control panel assembly is suitable for use on ovens that have been manufactured by General Electric, Hotpoint, and some other brands. This is a genuine part made of high-quality, durable materials and is sold individually.