Object Stack Blower Wheel Parts

The Blower Tangential 45mm is an OEM part for GE gas ranges. It is the convection fan that circulates heated air within the oven cavity during convection cooking cycles.

Symptoms of a bad blower tangential include:

• Lack of airflow inside the oven
• Uneven baking and roasting results  
• Inability to select convection cooking modes

Causes of failure can be worn bearings, burned out motor, or damage from excess heat over long-term use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models. 

This small plastic gear is part of the freezer drawer slide mechanism, allowing the drawer to open and close smoothly on its track. It meshes with the rail system to provide controlled, even movement of the drawer. Replace this gear if the freezer drawer is difficult to open, feels jerky or uneven when sliding, or if the original gear teeth are worn or broken.

If your range hood is noisy or has weak airflow, this blower fan blade restores ventilation. Moderately difficult repair—may need penetrating oil.

Lower rack roller and stud assembly for dishwashers. Mounts to the bottom rack to allow smooth sliding in and out. Replace if broken, cracked, or missing.

Replace the cable bracket guide roller on your dishwasher. This small wheel guides the door cable smoothly through the bracket, preventing binding and wear.

This blower housing assembly replaces the blower chamber that supports the blower wheel and routes air through the dryer for proper tumbling and drying. Restores correct airflow and helps reduce overheating or poor drying performance. What it does:

• Houses and supports the blower wheel to direct airflow from the drum to the exhaust.
• Ensures proper airflow for consistent drying and venting.
• Can address symptoms like weak airflow, long dry times, or unusual blower noise when damaged or cracked.
• Works with the blower wheel and motor to maintain lint passage and exhaust flow.

• Disconnect power before inspecting or replacing the blower housing; follow manufacturer safety procedures.
• Access may require removing the dryer front or rear panel depending on model.
• Inspect the blower wheel and motor for damage or obstructions while replacing the housing.

A replacement fan (blower) that restores airflow in compatible Bosch appliances to support proper cooling and ventilation. Installs in the appliance's air path to help maintain temperature balance and reduce strain on other components. What it does:

• Circulates air through the appliance to support cooling and ventilation.
• Helps cool motors, heating elements, or evaporator areas depending on the model.
• Common symptom relief: reduces overheating, improves cooling performance, and can stop abnormal fan noise when the original fan fails.
• Prevents related faults caused by insufficient airflow when installed correctly.

• Always disconnect power to the appliance before starting any repair.
• Handle the fan blades and motor carefully to avoid damage; avoid forcing connectors or mounting points.
• After installation, test the appliance functions and listen for normal fan operation; if unusual noise persists, re-check mounting and clearance.

The ducted fan blade circulates air through the ventilation system in your range hood. Replace if the fan makes excessive noise, vibrates heavily, has visible damage, or doesn't move air effectively.

This tub wheel mounts on the dishwasher's tub wall to guide and support the rack as it slides in and out. Replacing a worn wheel restores smooth rack movement and helps prevent binding, noise, and derailments.

• Mounts to the tub to provide rolling support for the dish rack/rail
• Replaces cracked, flattened, or missing wheels that impede rack travel
• Helps fix racks that stick, bind, are hard to pull/push, or derail
• Reduces grinding or squeaking from the rack area

• Disconnect power at the breaker before servicing
• Open the door and pull the rack forward for access
• Release the old wheel from its retainer/axle per your model's design; install the new wheel in the same orientation
• Ensure the wheel spins freely and the rack slides smoothly before use

Replacement roller for range drawer rails. Supports smooth drawer gliding along tracks. Replace when worn, cracked, or causing drawer binding or misalignment.

Instruction sheet included.

If your microwave overheats or ventilation has stopped working, the fan motor likely needs replacement. Circulates air to regulate temperature.

This is a fan blade that attaches to the motor shaft inside a range vent hood. It draws air through the hood to ventilate smoke, steam, and cooking odors from the cooktop area. Replace this blade if it is cracked, warped, or broken, or if the vent hood is producing excessive noise or vibration during operation.

Tangential blower that moves air through the oven's ventilation and control areas to help keep components cool and vent heat. Replacing a failed blower restores airflow for quieter operation and more consistent cooling around electronics. What it does:

• Circulates air across the oven vent and control area to dissipate heat; symptoms of failure include little or no airflow.
• Helps cool control electronics and nearby components; failure can cause high temperatures or thermal-related shutdowns.
• Reduces noisy or rough fan operation when bearings or motor wear.
• Supports proper venting after use to help the appliance cool down safely.

• Disconnect power to the appliance before accessing or replacing the blower.
• Allow the appliance to cool fully; remove access panels to reach the blower.
• Handle the blower and connector gently to avoid damaging the motor shaft or wiring; ensure correct orientation when reinstalling.

This AC fan motor drives the cooling fan inside a microwave or combination cooking unit, circulating air to prevent internal components from overheating during operation. It helps protect the magnetron, control board, and other electronics by dissipating heat. If your microwave overheats frequently, shuts off mid-cycle, or you no longer hear the cooling fan running, this motor likely needs replacement.

Replace your dishwasher's lower rack wheel if it's cracked, broken, or worn. This roller ensures smooth gliding of the bottom rack during loading and unloading.