Circuit Board Parts

This is a refrigerator control board that can be used to replace a damaged or faulty board in select refrigerators. The control board is used to manage various functions that occur in the refrigerator, including cooling and defrosting. If there is a problem with the board, the refrigerator might not be able to defrost correctly, or it might not stay cool.The control board for the refrigerator tends to last a long time. However, it could eventually wear out and stop working. It could be damaged due to a voltage surge, or it might be a faulty board. Remove and store all food in the refrigerator and unplug it before beginning repairs.This refrigerator control board works with certain models from Kenmore, Whirlpool, KitchenAid, Roper, Estate, Inglis, Crosley, Gladiator, Kirkland, and Maytag. It's sold individually and is a genuine OEM replacement.

This is a washing machine timer. This part controls the electrical components and the duration of the unit's cycles.If the washing machine unit will not run through the drain or spin cycles, it is possible that the timer has gone bad and will need to be replaced. Some users report the washing machine running through the washing cycle fine until it is time to drain or spin. The replacement steps are fairly easy and can be done quickly. Be sure to unplug the washing machine from its power source before starting the replacement process. Some people may wish to wear work gloves during this process to protect their hands from scratches or other injuries.This specific timer is compatible with washing machines that are manufactured by the Whirlpool brand. It is sourced right from the manufacturer as a high-quality and durable part. It is sold individually.

Electronic clock control for the oven/range. This board drives the display and manages bake/broil commands, restoring accurate timekeeping and dependable oven controls when the original control has failed.

• Governs oven operations by processing keypad inputs and signaling the heating circuits for bake and broil
• Displays clock, timer, and status information
• Monitors system feedback and can trigger fault alerts when issues are detected
• Common failure signs: blank or flickering display
• Oven won't start, won't respond to settings, or shows recurring control fault codes

• Disconnect power at the breaker and verify no voltage before servicing
• Use anti-static precautions; handle the board by the edges
• Note wire/connecter locations and transfer them one at a time; reuse any brackets/trim your model requires
• After installation, set the clock and run a test bake/broil; clear stored codes if applicable

Restore accurate cycle control with this washer timer. It sequences power to the drive motor, pump, and water inlet valves so the machine fills, washes, drains, and spins at the proper times.

• Advances the cycle through fill, wash, rinse, drain, and spin stages
• Sends power to the motor, pump, and inlet valves in the correct order and duration
• Safe symptoms: washer won't start, won't advance, stops mid-cycle, runs indefinitely, or skips rinse/spin
• Helps when cycles stall or the dial turns without moving the cycle forward

• Unplug the washer before servicing
• Open the control console to access the timer; note or photograph wiring
• Transfer wires one at a time to matching terminals on the new timer
• Reuse your existing knob/dial and mounting hardware; align the timer shaft before tightening

This electronic control board is the "brain" of the dishwasher, coordinating cycle timing and powering key components. Replacing a failed board can restore normal operation when the unit won't start, stops mid-cycle, or behaves erratically. What it does:

• Manages cycle timing and sequences based on selected options
• Distributes power to the circulation pump, drain pump, water inlet valve, heater, and dispenser
• Monitors inputs from sensors and the door switch to advance/complete cycles
• Faults can present as unresponsive controls, won't start/finish cycles, random resets, or error codes

• 1 electronic control board

• Disconnect power at the breaker before servicing; shut off water supply if accessing the lower compartment
• Use anti-static precautions; handle by the edges and avoid touching connector pins
• Access location varies by model; photograph wiring and transfer one connector at a time
• After installation, run the dishwasher's diagnostic/service cycle to verify operation

This electronic oven control board governs bake/broil functions and the display for Frigidaire-made ranges. Replace it to restore oven heat, accurate temperature regulation, and responsive controls when the original control fails. What it does

• Controls power to the bake and broil element/igniter and times oven cycles
• Monitors the oven sensor and maintains the set temperature
• Receives keypad inputs and drives the clock/temperature display
• Common symptoms: oven won't heat or overheats, display dead/dim, unresponsive buttons, intermittent shutoff, or error code on the display

• 1 electronic control board

• Disconnect power at the breaker before servicing; verify no voltage at the range
• Access the control through the backguard/control panel; photograph wiring for reference
• Handle the board by the edges to avoid static damage; move connectors one at a time
• Transfer the existing keypad overlay/trim and any mounting hardware from the old board

The Timer is an OEM part for SpeedQueen washing machines. It controls the duration of the wash cycles, ensuring each phase of the cycle is completed in the correct sequence. This includes washing, rinsing, and spinning, providing precise control over the washing process for optimal results.

Over time, the timer can become faulty due to electrical issues, wear and tear from repeated use, or internal component failures. When the timer malfunctions, it can disrupt the washing machine's ability to complete cycles correctly.

Symptoms of a bad timer include:

• The washer not advancing through cycles
• Cycles that are too long or too short
• The machine stopping mid-cycle
• Inconsistent or erratic timing of cycle phases

This OEM part ensures reliable performance and compatibility with SpeedQueen washing machines.

This part is a tactile control assembly kit that is used on a dishwasher. The tactile control assembly is the system that uses touch to make adjustments. For example, the buttons are connected to this tactile control assembly, and when the buttons are pressed, it is activated. A new tactile control assembly kit may be needed if the dishwasher keypad is entirely unresponsive when the buttons are pressed. If this is the case, the dishwasher will not be able to be used at all. The replacement process is relatively easy and takes anywhere from 30 to 60 minutes to complete. A screwdriver will be needed for the replacement.This tactile control assembly is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific tactile control assembly is compatible with dishwashers that are manufactured by the General Electric brand.

This 3-cycle dryer timer controls cycle selection and run time. Replace it to restore proper start, advancement, and shut-off so your dryer runs the correct length and switches cycles reliably.

• Controls cycle timing and advancement via internal cams, contacts, and a timer motor
• Routes power to the drive motor and heater according to the selected cycle
• Common symptoms: timer won't advance; dryer won't start on certain settings; won't shut off at the end of a cycle; or runs too long/too short
• Cause inconsistent drying in Auto cycles when internal contacts fail

• Disconnect power before servicing
• Remove the timer knob/dial and open the control console to access the timer
• Transfer wires one at a time from the old timer to the new; take a photo for reference
• Secure the timer and ensure the shaft aligns with the knob; test operation before reassembly

The Refer sum module is an electrical control module for GE refrigerators that helps manage monitored functions and restores normal operation when the original module fails. Replacing this module can resolve intermittent or nonworking refrigerator systems. What it does:

• Controls and coordinates monitored refrigerator functions tied to the module
• Corrects symptoms such as intermittent operation, failure to start, or unresponsive components
• Helps eliminate faults caused by a failed control module that interrupt normal cycles
• Works with existing wiring and connectors to restore the appliance's designed control functions

• Disconnect power to the refrigerator before beginning any work to avoid shock or equipment damage
• Handle the module by its edges and avoid contact with circuit traces; protect against static discharge
• Reconnect all wiring harnesses securely; do not force connectors

This replacement timer is made by Frigidaire and is compatible with commercial washers.This timer controls the internal components that monitor the duration of the cycles. If the user notices that the laundry center cycles are not running for the correct amount of time or do not start at all, the timer may need to be tested for continuity and then replaced. Make sure to entirely disconnect the appliance from the power and water sources and wear work gloves before attempting any repairs or replacements. This is an authentic OEM part made of high-quality, durable, non-corrosive materials and is only sold individually. This timer can be used with washers that have been manufactured by Frigidaire, Kenmore, Electrolux, Gibson, Kelvinator, Westinghouse, and some other brands.

This electronic control board is the appliance's main control, coordinating cycle selection, timing, and power to key components. Replacing a failed board restores proper operation when the console is dead, unresponsive, or cycles behave erratically. What it does:

• Interprets user inputs and governs cycle logic and timing
• Energizes relays to power motors, valves, and other loads
• Monitors sensors/switches and stores error codes for diagnostics
• Failure symptoms can include a dead or intermittent console, won't start, won't advance/stops mid-cycle, or erratic behavior

• 1 electronic control board

• Disconnect power before servicing; electrical shock risk
• Use ESD precautions; handle the PCB by the edges only
• Photograph/label connectors and transfer wiring/mounting from the original board
• On some models, complete any required configuration per the service/tech sheet after installation

This oven control board manages the electronic clock/timer and controls bake and broil functions. Replacing a failed board restores accurate temperature control, display, and keypad responsiveness so your range or wall oven heats and operates reliably again.

• Directs power to bake and broil elements based on user settings and oven sensor feedback
• Common symptoms: oven won't start or won't heat; temperatures are erratic or inaccurate
• Display is blank, dim, frozen, or keypad buttons are unresponsive
• Repeated fault/error codes or beeping from the control; intermittent cycling or shutdown

• Disconnect power at the breaker or fuse box before servicing; verify no voltage is present
• Use anti-static precautions and handle the board by the edges
• Photograph/label wiring; move connectors one at a time to the same locations on the new board; reuse original mounting hardware
• Restore power, set the clock, and run a short bake test to confirm proper operation

The Dispenser Control Board is an OEM replacement part for Frigidaire refrigerators. This component manages the operation of the ice and water dispenser, controlling functions like dispensing ice, water, and the corresponding display settings. It ensures that the dispenser operates correctly by communicating with other components, such as the ice maker and water valve.

Causes of a bad dispenser control board can include electrical malfunctions, power surges, or wear from regular use, which can affect the board’s ability to send signals to the dispenser components.

Symptoms of a bad dispenser control board include:

• Ice or water not dispensing properly
• Display or indicator lights not functioning
• Dispenser buttons unresponsive
• Intermittent or complete dispenser failure

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This oven control board is manufactured by Whirlpool. It is an electronic component and is responsible for monitoring and controlling the oven's functions, such as bake, broil, and warm, as well as maintaining the appropriate temperature set by the user. This control board does not include the physical controls for the oven.High heat and exposure to moisture can degrade the control board. This may result in intermittent problems or outright failure of the oven. In both cases, the control board will need to be replaced. Before working on the oven, make sure to unplug it or shut off the circuit breaker. Wear gloves at all times and exercise care when disconnecting/connecting the writing to the board.A genuine OEM part, this control board is sold individually. It fits Whirlpool and KitchenAid branded ovens.

This is a replacement control board that has been manufactured by General Electric for use with refrigerators.The control board is a critical component that ensures various refrigerator functions, such as defrost times and cooling, are properly regulated. This part should be replaced as soon as possible if faulty, otherwise the refrigerator may not be able to maintain a cold temperature or might not work at all. Before replacing this part, ensure the appliance is entirely disconnected from the power and water sources. Whenever attempting a repair, wear work gloves for protection.This part is suitable for use on a refrigerators that have been manufactured by General Electric, Hotpoint, RCA, and some other brands. This is a genuine OEM part and thus is manufactured from high-quality, durable, non-corrosive materials and is only sold individually.