Flame Sensor Parts

Dryer won't heat or shuts off too soon? This high-limit thermostat prevents overheating by cutting power when temps get too high. Easy DIY fix.

This cycling thermostat monitors the air temperature inside the dryer drum and signals the heating element to turn on or off to maintain the correct drying temperature. It is typically mounted on the blower housing or exhaust duct. Replace this thermostat if the dryer is not heating, overheating, or shutting off too early during a cycle.

Fix a dryer that won't heat with this thermostat. Regulates heating element temperature to prevent overheating. Moderate DIY repair in under an hour.

A 2 amp replacement fuse that protects low-current appliance circuits by opening when an overcurrent occurs. Install this direct-replacement fuse to restore power to control circuits and stop damage from a blown fuse. What it does:

• Interrupts current in control or low-voltage circuits when the fuse rating is exceeded
• Prevents electrical damage by opening the circuit on overloads
• Common symptoms of a blown fuse: appliance won't power on, controls are unresponsive, or intermittent operation
• Use as a like-for-like replacement matched to the original 2 amp rating

• Disconnect power to the appliance before inspecting or replacing the fuse
• Replace only when the appliance is cool and dry; avoid touching conductive ends

This 15 amp, 250 volt replacement fuse protects your appliance's electrical circuits by interrupting power when a fault or overload occurs. It restores safe operation once the underlying issue is fixed and the fuse is replaced. What it does:

• Acts as an overcurrent protection device for circuits rated up to 15 A and 250 V
• Prevents damage to wiring and components by opening the circuit during an overload or short
• Common symptom: appliance has no power or specific functions stop working after a sudden failure
• Replacing a blown fuse can resolve intermittent power loss or complete power failure tied to a single blown element

• Disconnect power to the appliance before inspecting or replacing the fuse
• Replace only with a fuse of the same amperage and voltage rating to maintain safety and proper protection
• Use insulated tools and avoid touching live terminals; internal access may require disassembly, follow OEM service instructions
• If fuses blow repeatedly, stop using the appliance.

This thermistor measures temperature changes inside your microwave to control cooking functions and safety systems. It sends temperature readings to the control board to adjust power levels and cooking times. Replace this part if your microwave doesn't heat properly, overheats, or sensor cooking features don't work correctly.

Fix a dryer that won't heat or overheats with this temperature-sensing thermostat. Controls heating cycles for proper drying. DIY-friendly repair.

This humidity sensor detects moisture levels inside the microwave cavity during cooking. It allows the microwave to automatically adjust cooking time and power when using sensor-cook or auto-reheat functions. Replace this sensor if your microwave consistently overcooks or undercooks food on sensor settings, or if you receive error codes related to the humidity sensor.

This flow meter measures the volume of water passing through the refrigerator's water dispensing system. It sends signals to the control board to accurately track water usage and control dispenser operation. Replace this part if your water dispenser delivers inconsistent amounts of water, fails to shut off properly, or if the dispenser display shows inaccurate readings.

This is a humidity sensor that detects steam levels inside the microwave cavity during cooking. It communicates moisture readings to the control board, allowing auto-cook and sensor-reheat functions to determine when food is done. Replace this sensor if your microwave's auto-cook cycles run too long or too short, or if sensor cooking modes no longer work properly.

This thermal fuse is a safety device that cuts power to the dryer's heating element if the internal temperature exceeds a safe limit. It is a one-time-use component that cannot be reset once tripped. Replace this part if the dryer runs but produces no heat, or if the dryer does not start at all.

Fixes frost buildup in freezer or warm refrigerator temps caused by failed defrost cycles. This 55-degree thermostat restores proper defrosting.

Fixes ice buildup and inconsistent cooling caused by defrost cycle failure. This thermostat senses evaporator temperature to control defrost timing.

This mechanical temperature control thermostat replaces the factory temperature sensing switch to restore proper refrigerator temperature regulation. It helps the appliance maintain set temperatures for safe food storage and normal cooling performance. What it does:

• Senses cabinet temperature and opens/closes the cooling circuit to regulate compressor run time.
• Commonly used when the refrigerator runs constantly or cycles too quickly.
• Works as the user-adjustable temperature control for manual-style refrigerator controls.

• Disconnect power to the appliance before starting any repair.
• Handle the sensing bulb/capillary tube gently; avoid kinks or sharp bends.
• Verify correct placement of the sensing bulb in the evaporator/probe clip per OEM location.