Jet Pump Parts

Fix a dishwasher that won't drain or has standing water after cycles. This drain pump assembly resolves drainage failures and grinding noises during operation.

Fixes dishwasher not draining or draining slowly. This complete pump and motor assembly kit includes circulation pump, drain pump, and wiring harness.

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Converts your gas range from natural gas to liquid propane fuel. Includes all surface burner orifices needed for fuel source conversion installation.

Converts your gas range between natural gas and LP propane fuel sources. Includes orifices and components needed for safe fuel type conversion.

The Drain Pump is an OEM part for Whirlpool dishwashers. This component is responsible for removing water from the dishwasher after each cycle. It actively pumps dirty water out through the drain hose and into the household plumbing system.

Causes of a bad drain pump include clogs in the line restricting water flow, failed or faulty motor windings preventing pump operation, or normal wear over time diminishing performance.

Symptoms of a bad drain pump include:

• Incomplete or inadequate draining of water after cycles
• Accumulation of standing water at the bottom of the unit
• Error codes or failure to fully finish cycles
• Strange noises or vibrations emanating from the drainage area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Converts your gas range to use liquid propane instead of natural gas. Includes orifices, fittings, and hardware for safe fuel conversion.

This ignitor orifice assembly routes gas to the oven igniter so burners light reliably. It replaces a damaged or clogged orifice to restore consistent ignition and safe burner operation. What it does:

• Directs gas flow from the manifold to the igniter/pilot so the burner can light
• Helps restore proper ignition when the burner sparks but fails to light
• Replaces corroded, clogged, or damaged orifice hardware that can weaken flame
• Works with standard oven/range ignition systems that use a separate orifice assembly

• One ignitor orifice assembly

• Turn off gas supply and disconnect power before attempting service
• Basic hand tools required; avoid overtightening fittings to prevent damage
• Check for gas leaks with a non-corrosive leak detector after installation

Converts your gas range from natural gas to liquid propane. Includes orifices and components needed for safe fuel changeover. Order if converting to LP.

Securely holds the gas orifice in your cooktop burner assembly. Replace if cracked, broken, or damaged to maintain proper gas flow and safe operation.

This orifice spud positions the burner orifice for proper gas flow to the burner, helping restore consistent ignition and steady flame performance in gas ranges and ovens. It replaces a worn or damaged spud to help maintain safe burner operation. What it does:

• Secures the burner orifice in the burner tube so gas is delivered correctly to the burner
• Restores consistent flame shape and size when a damaged spud is causing uneven or weak flames
• Helps resolve ignition issues tied to a misaligned or broken orifice spud
• Works with the existing burner assembly and orifice insert to control gas flow

• Turn off the gas supply and electricity to the appliance before starting work
• Use basic hand tools; avoid overtightening fittings to prevent damage
• Check all connections for leaks after installation using a soap solution or approved leak detector

5-piece LP conversion orifice kit for gas range surface burners. Converts your range from natural gas to liquid propane fuel. Replace when switching fuel types.

Air conditioner not cooling or making loud noises? This fan motor circulates air throughout your unit for efficient cooling performance. Direct fit.

Conversion kit for cooktop fuel type changes. Includes orifices and components needed to convert between natural gas and propane. Replace when switching fuel sources.

Fix your air conditioner that won't cool or has a noisy fan with this replacement fan motor. Common repair for units that run but don't blow air properly.