Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Power Nut Installation Parts

Microwave Oven Installation Tool
Genuine Frigidaire part
By: Frigidaire
Part Number: 318246702

Installation tool for mounting built-in microwave ovens. Required for proper alignment during install. Replace if missing, damaged, or worn from use.

Do-It-Yourself Stories from Customers like You No heat bottom coil shorted out and replaced still no heat   Kirk K. • Brockton , MA • April 18, 2015

As described, thanks your helped repair what the repairman would not or could not do.. Bottom element shorted and burned up from previous homeowner, not sure why or how? Replaced both heating elements, still no heat, the clock controller was also damaged due to the shorting even though it appeared to work OK, just no heat. Replaced clock/controller , both elements and the temp sensor .ALL WORKING !!! Lots of scrubbing and now have a "new" oven.! Half the cost of the serviceman, Saved my oven... Read more

More
$9.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Microwave Mounting Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304451561

Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.

Do-It-Yourself Stories from Customers like You The handle to my microwave was broken off   David M. • Auburn , MA • May 09, 2018

I ordered a replacement handle from Appliance Parts Pro.com and installed it after watching the video at their site for a similar model. The video told of the trick on removing the door surround that allowed me to access the handle screws. I purchased new handle screws at the same time I bought the new handle. The new handle and screws were a bit different than the original but fit perfectly. Hopefully it will be more durable than the original handle. Read more

More
$15.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Refrigerator Tapping Screw
Genuine Samsung part
By: Samsung
Part Number: 6002-001204

Tapping screw for refrigerator assembly and panel mounting. Replace when stripped, missing, or damaged during repairs or cabinet disassembly.

More
$6.41

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Refrigerator Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W11721628

Mounting screw for refrigerator interior components and panels. Replace if stripped, missing, or damaged during appliance maintenance or repair work.

More
$12.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Panel Mounting Screw
Genuine Ge part
By: Ge
Part Number: WB01K10091

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Do-It-Yourself Stories from Customers like You Lower oven would not ignite.   Gary P. • Randolph , NJ • March 19, 2017

Replaced the ignitor glow bar and deflector oven (which had a hole burned through it). Screws stripped upon disassembly of original deflector oven and needed to be replaced as well. Read more

More
$19.40

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
8-32 Screw, .270" Tab
Genuine Ge part
By: Ge
Part Number: WB01X23501

 

More
$14.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WB1X5731D

Includes 12 screws.

Do-It-Yourself Stories from Customers like You Broken front glass door   Roni T. • Sayreville , NJ • February 12, 2019

I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot. Read more

More
$25.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw (Hex Washer Head, 1/2-In Length)
Genuine Ge part
By: Ge
Part Number: WD02X10166

This hex washer-head screw is used in dishwashers to secure panels, brackets, and other hardware. Replacing a missing or corroded fastener restores a tight, stable installation and helps stop looseness or vibration during cycles.

  • Fastens dishwasher panels, brackets, trim, or mounts to the cabinet/frame
  • Replaces lost or stripped hardware after service or installation
  • Helps address loose or rattling panels and minor misalignment
  • Stainless steel construction per OEM spec for moisture-prone environments
What's included: Includes 1 screw. Install notes:
  • Disconnect power and water supply before servicing the dishwasher
  • Wear gloves; sheet metal edges can be sharp
  • Start threads by hand to avoid cross-threading; tighten with an appropriate driver
  • Do not overtighten, especially when threading into plastic

More
$9.88

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WH02X10001

Size: 14-10 a trt 7/8 s.

Do-It-Yourself Stories from Customers like You Water leaking from seal and noisy when spinning.   W J. • Panama City Beach , FL • July 26, 2018

Replaced the hub nut, tub bearing split ring, tub seal, hub washer and agitator coupler. I watched multiple times the APP video. It was extremely helpful and I would not have attempted this without seeing the video. I had a lot of trouble getting the hub nut off. I used an 1 5/8" 6 point strike box wrench and a 4# hammer to get it off. I sprayed it with WD 40 5 or 6 times over of the course of a week to let it soak. I finally got it off. Had I known that the shaft is not round I would have... Read more

More
$9.88

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Ground Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3351614

Size: 10-24 x 3/8 inch.

Do-It-Yourself Stories from Customers like You Timer/control failed   Gilbert G. • Lansing , IL • July 09, 2018

Replaced timer control unit, first time doing this. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Ge part
By: Ge
Part Number: WZ5X219D

Includes 12 screws.

More
$32.47

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Door Strike Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204368

Secures the door strike to your washer, keeping the latch aligned for firm closure. Replace if missing, stripped, or corroded to restore reliable latching.

Do-It-Yourself Stories from Customers like You The lid striker broke so i ordered a new one   Delores R. • Polkton , NC • June 24, 2016

It took less than 5 minutes to fix it. It was very simple, the part fit perfect. I will keep this web site in my favorites for later use. Read more

More
$12.12

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Screw 8 X 5/16
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303324184

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Do-It-Yourself Stories from Customers like You Door on our gas oven wouldn’t close completely   Billy W. • Brookhaven , MS • January 05, 2024

I replaced the spring hinges on the door without any issues. The parts I ordered were perfect and easy to install. Read more

More
$13.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Mounting Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304414648

Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.

More
$13.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308014215

Size: 6-20 x 0.312 inch.

More
$4.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Tapping Screw
Genuine Lg part
By: Lg
Part Number: FAB32139901

Tapping screw secures washer panels, brackets, and trim in place. Replace stripped, rusted, or missing screws to restore proper fit and stability.

Do-It-Yourself Stories from Customers like You Loud noises and grinding sound in my top load LG wt 4801 cwl   John M. • Fort Hood , TX • September 11, 2020

With help from appliance parts pros video, I was able to remove and replace the bearing/clutch assembly. While I had the assemble removed I remove the water pump cleaned and replaced it. The hoses were good and I did not need to replace them however I did not properly apply the hose clamp to the tub and it separated when I was ready to start it again. Cleaned up the mess remove the back cover and properly clamped the tub hose. The machine operated without noise and ran great. However after... Read more

More
$10.70

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google