Rail Parts

This duct assembly routes internal airflow in the appliance, replacing damaged or worn vent tubing to restore proper air movement. It helps reduce air leaks and airflow-related performance issues when the original duct is compromised. What it does:

• Channels blower air from the fan housing to the exhaust path to maintain proper ventilation.
• Replaces collapsed, torn or disconnected ducting that can cause poor airflow.
• Addresses symptoms such as reduced drying/cooling performance, longer cycles, or warm cabinet air.
• Helps eliminate drafty or noisy airflow caused by gaps or damaged duct sections.

• Disconnect power (and turn off gas supply for gas appliances) before beginning service.
• Access may require removing rear or lower access panels; keep hardware organized for reassembly.
• Inspect and replace any damaged clamps, seals or gaskets during installation for a proper seal.

Left-hand freezer drawer slide assembly supports and guides your refrigerator's freezer drawer. Replace if cracked, broken, or worn to restore smooth operation.

Slide rail assembly that mounts under the fresh-food shelf to guide your deli or snack drawer. Replace this part if your drawer sticks, tilts, or falls off track.

This is a left-side slide rail that supports and guides the crisper drawer as it opens and closes inside the refrigerator. It mounts to the interior wall of the fresh food compartment and allows the drawer to glide smoothly. Replace this rail if the crisper drawer is difficult to open, sits unevenly, falls off track, or no longer slides in and out properly.

Replaces worn or broken drawer support slide in your refrigerator. Restores smooth drawer gliding and secure alignment. Needed when slide is cracked or damaged.

The dishwasher guide rail back cap secures and protects the end of the dish rack sliding mechanism. Replace when the cap breaks or comes loose, causing the rack to slide improperly or fall off its track.

This bracket provides structural support for refrigerator drawers on the left side, helping them slide smoothly and remain stable. Located inside the refrigerator on the left interior wall, replace it when drawers sag, won't slide properly, or become loose and unstable.

Plastic guide that supports and aligns the upper freezer shelf along its track. Replace if cracked, broken, or worn to restore smooth sliding motion.

This mounting cup installs in the freezer liner to create a secure attachment point for the ice maker or its bracket. It helps keep the assembly stable and properly aligned so the ice maker mounts firmly and operates reliably. What it does:

• Provides the receiving anchor for the ice maker/bracket mounting screw
• Helps hold the ice maker level and reduces movement or vibration
• A worn, stripped, or missing cup can prevent the screw from tightening
• Common signs include a loose or sagging ice maker, rattling, or difficulty keeping the ice maker aligned

• 1 mounting cup

• Disconnect power and shut off the water supply before servicing
• Remove the ice maker to access the cup location
• Seat the cup fully into the liner opening, then reinstall the bracket/ice maker and mounting screw
• Do not overtighten; verify the ice maker sits level and clears the fill tube

Left-side support block that secures the meat pan rail to the refrigerator cabinet wall. Replace if cracked, broken, or missing to restore drawer alignment.

Basket hanger slide for refrigerator drawers. Installs on interior cabinet to support pull-out baskets. Replace if cracked, broken, or clips missing.

This is a right-side slide rail that supports and guides a freezer drawer or basket, allowing it to glide smoothly in and out. It mounts inside the freezer compartment and connects the drawer to the cabinet frame. Replace this part if your freezer drawer is difficult to open or close, sits unevenly, or falls off its track.

Replacement shelf divider that installs on refrigerator shelves or bins to organize items and prevent shifting. Replaces cracked, broken, or missing dividers.

This right-hand side adapter bracket secures the appliance cabinet or panel, restoring proper fit and stability. Replacing a damaged or missing bracket helps stop loose or misaligned panels and reduces rattling. What it does:

• Secures the right-side cabinet or panel to the chassis to maintain alignment and support.
• Helps eliminate panel movement, vibration and rattling that result from a cracked or missing bracket.
• Restores correct panel gaps so doors or drawers operate and close properly.

• Disconnect power (unplug or shut off breaker) before accessing the appliance.
• Remove the required access panels to reach the bracket; keep and reuse existing fasteners unless new hardware is specified by the model diagram.
• Transfer the bracket into position and fasten securely; check for proper panel alignment after installation.

Snaps across the front of your refrigerator door bin to secure bottles and condiments. Replace this trim rail if cracked, broken, or missing.

Metal shelf support clip installs on refrigerator or freezer walls to hold shelves securely in place. Replace if bent, broken, or missing clips.