Timer Knob Parts

This thermostat knob fits onto the control shaft so you can select and adjust cooking temperature. Replace a cracked or stripped knob to restore smooth operation and a clean, finished look.

• Attaches to the thermostat stem to allow manual temperature selection
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob spins without engaging or won't stay on the shaft
• Restores proper control feel and appearance

• Disconnect power to the appliance and allow surfaces to cool before service
• Pull the old knob straight off the thermostat shaft
• Align the new knob with the shaft and press straight on until fully seated; do not force
• The pointer aligns with the control markings before use

This is the switch control knob that fits onto the control shaft so you can select appliance settings with a simple turn. Replace a cracked, stripped, or missing knob to restore positive, accurate control. What it does:

• Attaches to the control switch shaft so you can turn and select settings
• Transfers hand rotation to the switch for proper operation
• Helps maintain clear, consistent setting selection
• Common symptoms: cracked or broken knob, spins without turning the switch, loose or won't stay on, missing knob

• 1 switch knob

• Make sure all controls are Off and the appliance is cool; disconnect power if working near the control panel
• Pull the old knob straight off the shaft—do not pry or lever against the panel
• Align the new knob with the shaft and press straight on until fully seated
• After installation, rotate through settings to ensure smooth, secure operation

This is a surface burner control knob for electric cooktops. It replaces a worn or broken knob so you can accurately turn the burner switch to the desired heat setting and restore a matched look on the cooktop.

• Attaches to the surface burner (infinite) switch shaft to set heat level
• Helps when a knob is cracked, stripped, loose, hard to turn, or missing
• Restores positive engagement and clear pointer alignment for temperature selection

• Disconnect power before servicing
• Pull the old knob straight off the switch shaft; align flat/"D" shape and press the new knob on
• If the knob does not seat, inspect the switch stem for damage or mismatch
• Test each position for smooth rotation and proper detent feel before use

This Control Knob is an OEM replacement part for Whirlpool electric cooktops. It fits over the infinite switch to control the heat levels of the surface elements. This knob allows for the adjustment of temperature settings, enabling users to easily select the appropriate heat levels for cooking.

Color: Black

Over time, the control knob can become damaged or worn out due to regular use. Issues like a loose or cracked knob, difficulty in turning it, or the knob not staying securely in place could indicate the need for replacement.

Symptoms of a faulty Cooktop Control Knob include:

• Difficulty turning the knob or selecting heat levels
• The knob feels loose or wobbly
• The knob is cracked or visibly damaged

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement timer knob mounts to the control timer shaft, allowing you to select cycles and settings with a positive, secure feel. Replacing a cracked or stripped knob restores smooth, accurate control of the timer.

• Attaches to the timer shaft so you can rotate and set the desired cycle
• Restores function when the original knob is cracked, loose, or stripped
• Helps resolve issues like the knob spinning freely, wobbling, or falling off
• Provides firm, reliable engagement for precise timer adjustments

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the timer shaft; retain and transfer any inner spring clip if present
• Align the new knob with the flat side or splines of the shaft and press on until fully seated
• Support the control panel during removal/installation and avoid excessive force

This replacement control knob restores smooth, precise adjustment of your appliance's control when the original is cracked, stripped, or missing. A fresh knob improves grip and pointer visibility so settings are easy and accurate to select.

• Attaches to the control shaft to adjust the setting
• Common symptoms: cracked or broken knob, slips or won't turn the control, falls off, faded indicator/graphics
• Restores proper alignment and feel for reliable operation
• Direct, push-on style replacement on applicable models

• Disconnect power; if servicing a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft
• Align the new knob with the shaft and press it on fully until seated
• Verify smooth operation and correct pointer alignment before use

This parts assembly is a model-specific collection of small components used to complete or restore proper installation and fit. It replaces missing or worn pieces so affected areas mount securely and operate as designed. What it does:

• Provides the factory-specified hardware/trim for your model
• Restores secure mounting and proper alignment of affected components
• Helps eliminate rattles, gaps, or looseness caused by missing hardware
• Useful after service or moves when original pieces are lost

• One parts assembly

• Disconnect power; shut off water or gas before service
• Wear gloves; watch for sharp edges and small parts
• Reference your model's service/installation manual to match and place each piece
• Install hardware snugly; avoid overtightening plastic components

The Knob is an OEM component for Whirlpool dryers. As the user interface, it allows selections of temperature, settings, and time options with the twist of a finger.

Designed for comfort during extended cycles, the durable knob utilizes non-slip textured surfaces around robust internal gears. Integrated fasteners mount securely to shafts coupling knobs to their respective switches. 

Causes of faulty knobs can include stripped internal teeth from mineral deposits binding moving parts or broken mounting tabs weakened through normal wear over many years.

Symptoms of a damaged knob include:

• Failure to engage settings or spin freely  
• Dials loose on shaft allowing accidental shifts   
• Missing labels from normal cleaning/wear reducing visibility
• Cracks or breaks compromising seal against moisture

Replace yours today with this genuine Whirlpool knob to restore easy navigation of cycles. Compatible with Kenmore and some Maytag dryers.

This thermostat control knob lets you set the oven temperature by turning the thermostat shaft. Replace a cracked, stripped, or missing knob to restore secure temperature selection and a clean, finished look.

• Attaches to the oven thermostat shaft to select baking temperatures
• Replaces knobs that are cracked, stripped, loose, wobbly, or missing
• Can help when the knob slips, won't turn the shaft, or won't stay aligned during adjustment

• Disconnect power and allow the appliance to cool before servicing.
• Pull the old knob straight off the thermostat shaft.
• Align the new knob's opening with the shaft and press firmly until fully seated.
• Rotate through the full range to confirm smooth operation and alignment with panel markings.

Color: black. Measures about 2 inches in diameter.

Color: black. Measures about 2 inches in diameter.

White

Replacement control knob for the oven thermostat. It installs on the thermostat shaft so you can select cooking temperatures. Replaces a cracked, loose, or missing knob to restore smooth adjustment and clear, readable settings. What it does:

• Provides the hand control to turn the oven's thermostat and set temperature
• Press-fits onto the thermostat shaft for consistent, aligned operation
• Restores a secure grip and pointer alignment when the original is worn
• Common symptoms: knob cracked, falls off, spins freely, or markings are hard to read

• One white thermostat control knob

• Disconnect power and allow the appliance to cool; shut off gas supply if applicable
• Pull the old knob straight off the thermostat shaft—avoid prying against the panel
• Align the new knob with the shaft flat and press straight on until fully seated
• The pointer aligns with Off; remove and reseat if needed

This black surface element control knob fits the burner's infinite switch, letting you turn the element on/off and set heat levels. Replace cracked, stripped, or missing knobs to restore safe, reliable control of your cooktop settings.

• Attaches to the infinite switch shaft to control a surface heating element
• Provides on/off and variable heat selection
• Replace if the knob is cracked, stripped, missing, or no longer engages the shaft
• Helpful when the control is hard to turn, wobbly, or can't be reliably set to Off

• Turn the appliance off and disconnect power before servicing
• Ensure the control is in the Off position
• Pull the old knob straight off the switch shaft; align the new knob with the shaft and press until fully seated
• Do not force; apply even pressure and verify proper alignment

This thermostat control knob replaces a worn or broken temperature selector knob. It restores a clean look and positive feel so you can reliably set cooking temperatures. White finish matches the original appearance. What it does:

• Attaches to the thermostat shaft to select temperature settings
• Replaces knobs that are cracked, stripped, loose, missing, or hard to read
• Restores smooth turning and a secure fit on the control stem
• Helps ensure the pointer aligns with the temperature markings

• One white thermostat control knob

• Turn all controls off and allow the appliance to cool before service; disconnect power if accessing any internal panels
• Pull the old knob straight off the thermostat shaft; avoid prying on the panel
• Align the new knob's hub with the shaft and press straight on until fully seated
• Verify pointer alignment with the temperature scale and re-orient if needed

The timer dial fits over the timer shaft on the control panel. It displays cycle options and provides a secure, aligned surface for the knob to rotate the timer so selections line up correctly.

• Surrounds the timer knob and shows cycle names/markers
• Aligns with the timer so the knob can index and turn settings properly
• Typical symptoms: cracked or broken ring, faded markings, loose/wobbly dial, difficulty selecting or aligning cycles
• Direct-fit replacement of the original timer dial

• Disconnect power to the appliance
• Pull off the timer knob; remove any retaining clip or nut if present
• Lift off the old dial; align the new dial with the panel indexing and timer shaft, then press into place
• Reinstall the retainer and knob; restore power and verify alignment