Bottom Grill Parts

A left-front cast iron cooktop grate that supports cookware over the burner and restores stable, level cooking. Durable cast construction resists heat and holds pots securely for everyday stovetop use. What it does

• Replaces a damaged, cracked, or missing left-front cast grate so pans sit level over the burner
• Provides a stable cooking surface to help prevent cookware from rocking or slipping
• Maintains proper spacing from the burner for even flame contact and safe use
• Restores the aesthetic, functional appearance of the cooktop

• One left-front cast iron cooktop grate

• Allow the cooktop to cool completely before removing or installing the grate
• Lift straight up to remove; set replacement grate into position so it seats securely on the cooktop supports
• Handle with care—cast grates are heavy and can chip if dropped
• Clean with non-abrasive cleaners and avoid thermal shock (don't immerse a hot grate in cold water)

Please note: These are a dark grey replacing light grey

This cast cooktop grate supports cookware above gas burners, providing a stable cooking surface and directing heat where you need it. It replaces a worn, cracked, or misshapen grate to restore safe, even cooking performance. What it does:

• Supports pots and pans over a gas burner for stable cooking
• Helps direct flame and heat for consistent cooking results
• Replaces cracked, warped, or chipped grates that cause wobbling or uneven support
• Prevents cookware from making direct contact with burner heads

• Allow burners and grate to cool completely before handling.
• Lift old grate straight up; align new grate over burner and set into place—no tools typically required.
• Use caution: grates can be heavy and have sharp edges; wear gloves if needed.
• Do not modify the part; if fit or performance seems wrong, verify correct part number.

Replacement grommet that fits under a range grate foot to cushion and stabilize the grate, helping reduce noise and prevent scratching or shifting of the cooktop grate during use. What it does:

• Cushions and secures grate feet to stop rattling and unwanted movement.
• Helps protect the cooktop finish from scratching and wear where the grate contacts the surface.
• Can address noisy, loose, or rocking grates caused by worn or missing grommets.
• Restores proper grate alignment for safer, more stable cooking.

• Ensure the appliance is off and completely cool before starting any service.
• Lift the grate, remove the old grommet, and press the replacement onto the grate foot until fully seated.
• If multiple grommets show wear, replace matching feet for even support.

This cooktop grate kit replaces damaged or worn grates to restore stable, even support for pots and pans on a gas range. It helps maintain proper burner performance and keeps cookware level during cooking. What it does:

• Provides a sturdy surface for cookware so pots and pans sit flat and stable over burners
• Protects the cooktop surface from spills and direct flame contact
• Restores proper cookware alignment if existing grates are warped, chipped, or heavily worn
• Helps reduce wobble and improves cooking consistency when grates are compromised

• Turn burners off and allow the cooktop to cool completely before removing or installing grates
• Lift old grates straight up; install new grate pieces so they sit flush and stable over each burner
• No special tools typically required, but follow your range manual for any model-specific steps

This gas burner grate supports cookware on a gas cooktop, restoring stable, level support for safer, more consistent cooking. It replaces a cracked, warped or missing grate so pots and pans sit securely over the burner. What it does:

• Provides a stable surface for cookware so pans sit level over the flame.
• Helps maintain consistent heat contact for more even cooking.
• Replaces broken, chipped, warped or missing grates that cause wobbling or uneven heating.
• Designed to fit the designated cooktop burner location for correct alignment.

• Allow the cooktop to cool and turn all controls to OFF before replacing the grate.
• Remove the old grate and set the new grate into position—no tools are typically required.
• Inspect surrounding burner caps and ignitors; do not operate burners if any components are damaged.
• If you smell gas or suspect a leak, shut off the gas supply.

This cast cooktop grate replaces a damaged or worn right-side burner support, restoring a stable surface for pots and pans and helping burners heat cookware evenly. Durable cast construction resists warping from high-heat cooking. What it does:

• Supports cookware over the right burner so pots and pans sit level while cooking
• Provides a stable, heat-resistant surface that withstands regular stovetop use
• Helps maintain proper burner flame contact and consistent cooking performance
• Replaces cracked, chipped or misshapen grates that can cause instability or uneven heating

• Replace only when cooktop is cool and all controls are off; handle grate carefully—cast parts can be heavy
• No tools typically required; simply lift out the old grate and set the replacement in position
• Clean grate with non-abrasive cleaners; avoid harsh chemicals that may damage finishes

This replacement grate cartridge secures and centers a cooktop burner grate so cookware sits level and burners perform as intended. Durable design restores stable support for pots and pans on compatible gas ranges. What it does:

• Replaces a worn or broken grate cartridge that lets the grate rock or sit unevenly
• Helps keep the burner grate properly aligned over the burner for even cooking
• Prevents cookware from wobbling or shifting during use
• Restores proper fit where the grate attaches to the cooktop surface

• One grate assembly (cartridge) as shown

• Turn off and disconnect power and gas supply; allow the range to cool completely before servicing
• Remove the burner grate and lift out the old cartridge; align tabs and snap or seat the new cartridge into place
• Handle enamel-coated grates carefully to avoid chipping; use soft padding if needed during installation

This grill base is the lower kick grille assembly that supports and protects the appliance's lower front opening while keeping the unit's appearance finished. It restores proper airflow and a secure lower trim. What it does

• Replaces a cracked, bent or missing lower kick grille that can catch debris or look damaged.
• Helps maintain proper front trim alignment and keeps the space below the appliance covered.
• Reduces draft and prevents small objects from entering the area beneath the appliance.
• Restores original fit and appearance when the existing grill is loose or warped.

• Disconnect power to the appliance before beginning work.
• Typically fastens with a few screws or retention clips; use basic hand tools.
• Support the grille during removal to avoid scratching the finish or damaging adjacent trim.

Color: white. Measures about 38 inches wide by 4 inches high.

This lower kickplate grille covers the refrigerator's toe-kick opening to protect components and finish the appliance's front. It restores appearance and maintains proper airflow through the cabinet bottom. What it does:

• Covers and protects the lower front area and components behind the toe kick
• Helps direct airflow under the cabinet where condenser/venting passages are located
• Replaces cracked, broken, bent, or missing lower grille pieces that leave the opening exposed
• Restores a finished look to the appliance front

• One lower kickplate grille

• Disconnect power to the appliance before starting any work
• Remove the old kickplate by releasing retained clips or fasteners, then align and secure the replacement
• Use gentle pressure to avoid bending the grille or damaging adjacent finishes
• Replace with OEM-specified hardware

A replacement lower front vent grill that restores finished appearance and directs refrigerator airflow for proper cooling. Fits into the cabinet front to protect internal components while keeping the vent path clear. What it does

• Covers and protects the refrigerator's lower vent area and internal components from debris.
• Directs airflow from condenser/evaporator area to help maintain proper cooling performance.
• Replaces cracked, broken, or loose trim that causes rattling or poor fit.
• Improves the appliance's exterior appearance when the original grill is damaged or discolored.

• Disconnect power to the appliance before starting any work.
• Typically installs by aligning tabs/clips and snapping into place; some models may use a few screws.
• Handle plastic parts gently to avoid breaking mounting tabs; use hand tools as needed.

This grill vent replaces the front vent grille that directs airflow and covers the oven/range vent opening for a clean appearance. It restores proper airflow routing and keeps debris out of the vent area. What it does:

• Covers and protects the appliance vent opening while directing exhaust airflow
• Helps prevent grease and food debris from entering internal vent passages
• Worn, cracked or missing vents can cause visible gaps, rattling or trapped odors
• Restores the appliance's finished appearance and helps maintain proper ventilation

• Disconnect power to the appliance before starting any repair
• Handle part carefully to avoid scratching the finish; a non-marring tool may be helpful
• Installation usually requires removing the lower access panel or front trim—keep fasteners organized

Qty: 1 (order quantity needed)

This cast side grate provides a sturdy, heat-resistant cooking surface for a gas range burner, helping support cookware and maintain proper flame contact for even cooking. Ideal when an original grate is cracked, warped, or missing. What it does:

• Replaces a damaged or missing side grate to restore proper cookware support and burner clearance
• Maintains correct distance between cookware and flame for consistent heating
• Resists high heat and surface wear typical of everyday stovetop use
• Helps prevent pans from tipping or sliding on the cooktop

• Install on a cooled, unlit cooktop; ensure the grate sits flat and stable over the burner
• No special tools required; lift out the old grate and position the replacement
• Verify burner head components are correctly seated before use
• If burner operation or flame shape changes after installation, turn off the appliance and inspect