Coil Parts

• Genuine OEM Part: Produced by Whirlpool for unmatched compatibility and reliability with Maytag and Magic Chef appliances.
• Spade Style Connections: Features secure spade terminals for easy electrical connections.
• Exact Fit: Sized at 16x16 inches with 2-inch deep terminals for a perfect fit in specific models.

Common Symptoms for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Oven not heating evenly or not heating at all
• Visible damage or breakage in the element
• Oven taking longer than usual to preheat
• Inconsistent baking results

Basic Troubleshooting for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Check for Visual Damage: Inspect the bake element for any signs of wear or damage. Look for blisters, breaks, or areas that might be discolored (typically a burnt orange or darker spots).
• Test for Continuity: Using a multimeter, test the element for continuity. A lack of continuity indicates that the element is faulty and needs replacement.

Installation Instructions for Maytag Magic Chef Oven Bake Element WP7406P012-60:

1. Ensure Safety: Disconnect power to the oven by unplugging it or turning off the circuit breaker.
2. Access and Remove the Old Element: Remove the oven racks for better access, unscrew the mounts, and gently pull the element forward to reach the terminals.
3. Disconnect and Replace: Detach the spade connectors from the old element and connect them to the new one. Secure the new element in place with the original screws.
4. Operational Test: After installation, reconnect power and briefly turn on the oven to ensure the new element functions correctly.

This is the upper broil element located at the top of the oven cavity, responsible for producing high, direct heat for broiling food. It is a looped metal heating element that glows red when energized. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

The dryer gas connector kit contains the wiring connectors used to link the gas ignition and heating components inside your dryer. It ensures a reliable electrical connection between the igniter, gas valve coils, and the control system. Replace this kit if your dryer runs but won't heat, the igniter fails to glow, or you have a damaged or melted connector causing an intermittent heating problem.

Fixes ice buildup in freezer or frost on back wall. This defrost heater melts accumulated frost during defrost cycles. Moderate DIY difficulty.

Fix ice buildup in your freezer with this refrigerator defrost heater. Installs on evaporator coils behind the back panel. Moderate difficulty repair.

This is a heater fixture used in the refrigerator's defrost or heating system. It provides the mounting and electrical connection point for the heating element. Replace this fixture if the heater is not functioning properly, if the mounting is damaged, or if you notice excessive frost buildup in the freezer compartment.

Burner won't heat or randomly stays on? This range heating element restores proper burner function. DIY repair takes about 30 minutes with basic tools.

Burner not heating or burned out? This 6-inch surface element restores cooking function. Easy plug-in installation takes minutes to complete.

Burner not heating or heating unevenly? This surface heating element restores consistent temperature control. Common fix for cold or slow-heating burners.

Fix a burner that won't heat or heats unevenly with this electric range top element. Direct replacement part restores proper cooking performance.

This thermostat monitors the evaporator coil temperature and signals the defrost heater to turn on or off during the defrost cycle. It prevents excessive frost buildup on the evaporator, which is essential for proper cooling in the refrigerator. Replace this part if you notice heavy frost accumulation on the back wall of the freezer, the refrigerator is not cooling properly, or the defrost cycle is not activating.

Burner not heating or heating unevenly? This radiant surface element restores consistent cooking heat to your electric range smoothtop. Direct replacement.

Burner not heating or heating unevenly? This electric range surface element restores proper cooking temperature. Moderate DIY repair in 20-30 minutes.

Fixes uneven browning or broiler not heating. This upper heating element restores high-heat broiling in electric ovens. Moderate DIY difficulty.

Fix a dryer that won't heat with this gas valve. Controls gas flow to the burner assembly. Moderate difficulty repair taking 30-45 minutes.