Generator Ignition Coil Parts

This water tank assembly collects condensation produced during the drying cycle in a ventless or condenser dryer. It is a removable reservoir that must be emptied periodically to allow the dryer to continue operating. Replace this tank if it is cracked, leaking, or if the dryer displays a full tank error even after emptying.

Fix freezer icing and frozen evaporator fan with this refrigerator defrost heater metal sheath. Restores proper defrost cycle. Moderate DIY repair.

Broiler not heating or browning food? This broil element provides direct heat for finishing and browning. Moderate DIY repair for most home ranges.

This assembly includes the gas valve and connecting pipe that control the flow of gas to the dryer's burner. It regulates when gas is delivered to the igniter and burner tube during the heating cycle. Replace this assembly if your gas dryer is not heating, heats intermittently, or if the gas valve fails to open properly during operation.

Oven not heating or baking unevenly? This lower bake element restores consistent bottom heat for proper baking temperatures and even cooking results.

Fix ice buildup and frozen water dispenser issues with this dispenser heater kit. Prevents frost clogging in the chute and valve area. Moderate DIY repair.

This is a flat electric heating element designed to power the built-in griddle on a range cooktop. It provides even heat across the griddle surface for cooking. Replace this element if your griddle no longer heats, heats unevenly, or shows visible damage such as cracks or burn marks.

Fix frost buildup in your refrigerator's freezer with this defrost heater assembly. Restores proper defrost cycling to prevent ice accumulation.

Burner not heating or heating unevenly? This range top element restores proper cooking performance. Direct replacement part with moderate difficulty.

The Water Valve is an OEM part for GE electric dryers. Located near the bottom of the machine, it controls water flow into the condenser system during moisture-sensing cycles.

The moisture sensing function uses this valve to introduce precise amounts of water vapor into the exhaust air stream periodically. This allows the condenser to capture moisture readings accurately and determine optimal cycle time based on humidity levels. 

Causes of failure include mineral buildup restricting flow, worn seals enabling leaks, or misaligned internal components hindering valve movement.

Symptoms of a faulty water valve are: 

• Loss of moisture sensing ability
• Incomplete or improper readings affecting cycle times  
• Water leaks from the valve area
• Failure to inject water vapor as needed

This part is also compatible with some Kenmore models using GE components.

This heating element kit replaces a failed heating element to restore normal heating in compatible laundry or cooking appliances. It provides the core heating component needed to get your appliance producing heat again. What it does:

• Replaces a damaged or burned-out heating element that stops the appliance from heating
• Helps resolve symptoms like no heat, weak or inconsistent heating, or tripped thermal cutouts
• Restores the appliance's ability to reach and maintain operating temperatures for normal cycles
• Works as the direct replacement heating component shown in OEM parts listings

• One heating element kit as shown

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock risk
• Handle the element and terminals carefully to avoid bending or damaging mounting tabs
• Confirm correct terminal connections and secure mounting per the appliance wiring diagram

This is the upper broil element located at the top of the oven cavity, responsible for producing high, direct heat for broiling food. It is a looped metal heating element that glows red when energized. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

Oven not heating or baking unevenly? This lower bake element restores consistent heat for even cooking. DIY-friendly repair in under 30 minutes.

This Pipe Assembly routes water into the appliance so the dispenser and ice maker can receive a steady supply. Replacing a damaged tube restores proper water flow and helps stop leaks or pooling inside or beneath the unit. What it does:

• Carries incoming water from the household supply to the appliance's internal water system
• Restores water delivery to the dispenser and ice maker when the original tube is cracked or blocked
• Prevents leaks and water damage caused by split, corroded, or pinched tubing
• Helps eliminate intermittent flow or weak dispenser output caused by a damaged water line

• One complete pipe assembly as shown

• Shut off the refrigerator's water supply and unplug the appliance before beginning
• Handle tubing fittings carefully; use proper tools to avoid damage or overtightening
• Inspect connection points and replace seals or clips if worn; test for leaks after reinstalling

• Genuine OEM Part: Produced by Whirlpool for unmatched compatibility and reliability with Maytag and Magic Chef appliances.
• Spade Style Connections: Features secure spade terminals for easy electrical connections.
• Exact Fit: Sized at 16x16 inches with 2-inch deep terminals for a perfect fit in specific models.

Common Symptoms for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Oven not heating evenly or not heating at all
• Visible damage or breakage in the element
• Oven taking longer than usual to preheat
• Inconsistent baking results

Basic Troubleshooting for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Check for Visual Damage: Inspect the bake element for any signs of wear or damage. Look for blisters, breaks, or areas that might be discolored (typically a burnt orange or darker spots).
• Test for Continuity: Using a multimeter, test the element for continuity. A lack of continuity indicates that the element is faulty and needs replacement.

Installation Instructions for Maytag Magic Chef Oven Bake Element WP7406P012-60:

1. Ensure Safety: Disconnect power to the oven by unplugging it or turning off the circuit breaker.
2. Access and Remove the Old Element: Remove the oven racks for better access, unscrew the mounts, and gently pull the element forward to reach the terminals.
3. Disconnect and Replace: Detach the spade connectors from the old element and connect them to the new one. Secure the new element in place with the original screws.
4. Operational Test: After installation, reconnect power and briefly turn on the oven to ensure the new element functions correctly.