Small Engine Ignition Coil Parts

Range burner not heating? This top surface element restores cooking power to your electric range. Direct plug-in design makes installation quick and easy.

This is the upper broil element located at the top of the oven cavity, responsible for producing high, direct heat for broiling food. It is a looped metal heating element that glows red when energized. Replace this element if it no longer heats up, heats unevenly, has visible cracks or blistering, or if the broil function stops working entirely.

This gas valve assembly controls the flow of gas to the burner in a gas dryer. It consists of solenoid-operated valves that open and close to regulate gas supply during the heating cycle. Replace this assembly if the dryer runs but does not heat, heats intermittently, or if you notice the dryer stopping mid-cycle without fully drying clothes.

Freezer frosting up or fridge not cooling? This defrost heater kit melts ice buildup on the evaporator coil. DIYers report moderate difficulty repair.

This surface heating element replaces a damaged or worn top burner coil to restore cooking heat on electric ranges. It installs into the stove's cooktop receptacle and provides a reliable heating surface for pots and pans. What it does:

• Heats cookware on the cooktop for boiling, frying and simmering
• Restores power to a burner that no longer heats or only heats intermittently
• Replaces elements with visible breaks, burn spots, or inconsistent temperature
• Works with the range's burner receptacle to complete the heating circuit

• Disconnect power to the range at the breaker or unplug before servicing.
• Replace by lifting the cooktop or removing the element from its receptacle per your model's service instructions.
• Ensure terminals are fully seated and secured; inspect wiring and receptacle for damage and replace if necessary.

1200 watts

Fix freezer icing and frozen evaporator fan with this refrigerator defrost heater metal sheath. Restores proper defrost cycle. Moderate DIY repair.

Broiler not heating or browning food? This broil element provides direct heat for finishing and browning. Moderate DIY repair for most home ranges.

This assembly includes the gas valve and connecting pipe that control the flow of gas to the dryer's burner. It regulates when gas is delivered to the igniter and burner tube during the heating cycle. Replace this assembly if your gas dryer is not heating, heats intermittently, or if the gas valve fails to open properly during operation.

Fix frost buildup in your refrigerator's freezer with this defrost heater assembly. Restores proper defrost cycling to prevent ice accumulation.

Burner not heating or heating unevenly? This range top element restores proper cooking performance. Direct replacement part with moderate difficulty.

The Water Valve is an OEM part for GE electric dryers. Located near the bottom of the machine, it controls water flow into the condenser system during moisture-sensing cycles.

The moisture sensing function uses this valve to introduce precise amounts of water vapor into the exhaust air stream periodically. This allows the condenser to capture moisture readings accurately and determine optimal cycle time based on humidity levels. 

Causes of failure include mineral buildup restricting flow, worn seals enabling leaks, or misaligned internal components hindering valve movement.

Symptoms of a faulty water valve are: 

• Loss of moisture sensing ability
• Incomplete or improper readings affecting cycle times  
• Water leaks from the valve area
• Failure to inject water vapor as needed

This part is also compatible with some Kenmore models using GE components.

This heating element kit replaces a failed heating element to restore normal heating in compatible laundry or cooking appliances. It provides the core heating component needed to get your appliance producing heat again. What it does:

• Replaces a damaged or burned-out heating element that stops the appliance from heating
• Helps resolve symptoms like no heat, weak or inconsistent heating, or tripped thermal cutouts
• Restores the appliance's ability to reach and maintain operating temperatures for normal cycles
• Works as the direct replacement heating component shown in OEM parts listings

• One heating element kit as shown

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock risk
• Handle the element and terminals carefully to avoid bending or damaging mounting tabs
• Confirm correct terminal connections and secure mounting per the appliance wiring diagram

Oven not heating or baking unevenly? This lower bake element restores consistent heat for even cooking. DIY-friendly repair in under 30 minutes.

• Genuine OEM Part: Produced by Whirlpool for unmatched compatibility and reliability with Maytag and Magic Chef appliances.
• Spade Style Connections: Features secure spade terminals for easy electrical connections.
• Exact Fit: Sized at 16x16 inches with 2-inch deep terminals for a perfect fit in specific models.

Common Symptoms for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Oven not heating evenly or not heating at all
• Visible damage or breakage in the element
• Oven taking longer than usual to preheat
• Inconsistent baking results

Basic Troubleshooting for Maytag Magic Chef Oven Bake Element WP7406P012-60:

• Check for Visual Damage: Inspect the bake element for any signs of wear or damage. Look for blisters, breaks, or areas that might be discolored (typically a burnt orange or darker spots).
• Test for Continuity: Using a multimeter, test the element for continuity. A lack of continuity indicates that the element is faulty and needs replacement.

Installation Instructions for Maytag Magic Chef Oven Bake Element WP7406P012-60:

1. Ensure Safety: Disconnect power to the oven by unplugging it or turning off the circuit breaker.
2. Access and Remove the Old Element: Remove the oven racks for better access, unscrew the mounts, and gently pull the element forward to reach the terminals.
3. Disconnect and Replace: Detach the spade connectors from the old element and connect them to the new one. Secure the new element in place with the original screws.
4. Operational Test: After installation, reconnect power and briefly turn on the oven to ensure the new element functions correctly.

The dryer gas connector kit contains the wiring connectors used to link the gas ignition and heating components inside your dryer. It ensures a reliable electrical connection between the igniter, gas valve coils, and the control system. Replace this kit if your dryer runs but won't heat, the igniter fails to glow, or you have a damaged or melted connector causing an intermittent heating problem.