Object Stack Blower Wheel Parts

This fan blade replaces a damaged or worn blower blade to restore proper airflow and reduce noise. It helps the appliance circulate air efficiently so cooling and ventilation perform as intended. What it does:

• Moves air across the evaporator/heatsink or within the appliance cabinet to support cooling and ventilation
• Restores full airflow when the original blade is cracked, warped, or missing
• Helps reduce rubbing, vibration, and unusual fan noise caused by damaged blades
• Prevents motor strain that can occur when an imbalanced or broken blade is used

• Disconnect power to the appliance before beginning any repair
• Handle the blade carefully to avoid bending the impeller fins
• Inspect the motor shaft, set screw, and mounting hardware; replace any damaged fasteners

This genuine OEM replacement part is a pulley assembly for dryers. Sometimes called an idler arm, the pulley assembly keeps the dryer drive belt under tension as the belt wraps around the dryer drum. If the dryer is no longer spinning properly and is making a lot of noise, the pulley assembly may need to be replaced. Luckily this repair is a relatively simple process.To remove the old dryer pulley assembly, start by making sure the dryer is unplugged. Remove the lint screen from the top of the dryer. Remove the two Phillips screws by the lint screen opening. Depress the clips that hold the top cover down. Lift the top cover and keep it in an upright position. Disconnect the wire harness to the switch that separates the connector. Remove the screws on the front panel. Lift the panel forward and set it to the side. Next, lift the drum and locate the pulley assembly under the drum. Lift the belt off the motor pulley to remove the assembly. Set the new pulley assembly in the same position as the old one and make sure everything is aligned. Rotate the drum to make sure it rotates smoothly. reinstall the panels.This replacement part is sold individually and is compatible with Bosch, Gaggenau, and Thermador dryers.

Oven not heating evenly or cooking slowly? This convection fan blade circulates hot air for consistent baking. Moderate DIY repair in 30-45 minutes.

If your range hood isn't venting properly or makes excessive noise, the blower wheel may be damaged. This fan blade restores proper airflow and ventilation.

Range hood not venting properly or making unusual noise? A damaged blower wheel reduces airflow and efficiency. This clockwise rotation wheel restores performance.

Spiral pin secures the roller axle in your dishwasher's lower rack assembly. Replace if the pin is missing, bent, or dislodged to restore stability.

Replace the lower dish rack roller assembly in your dishwasher. Needed when the rack roller is cracked, broken, or no longer rolls smoothly along the rails.

Cabinet roller for refrigerators. Mounts under the cabinet to enable smooth movement across the floor. Replace if cracked, broken, or worn for stability.

Replace worn, cracked, or missing range wheel and bracket assembly. Installs on the bottom of your range for smooth rolling and stability. Ideal fix for flat spots or broken wheels from frequent moving.

Replace worn or broken dishwasher lower rack wheels that cause difficult rolling or uneven gliding. Includes wheels and axles for smooth rack operation.

Air conditioner not blowing cold air or making unusual noise? This blower wheel moves air through your unit. Common DIY fix with basic tools.