Power Nut Installation Parts
Genuine Ge part
By: Ge
Part Number: WR1X1786
Replacement mounting screw for securing panels, trim, and internal components in appliances. Needed when original screws are stripped, lost, or damaged.
More
Genuine Ge part
By: Ge
Part Number: WZ4X241D
Includes 12 screws. Size: 8-18 ab.
Do-It-Yourself Stories from Customers like You
We didn't have a power cord for our dryer Heather B. • Dulce , NM • October 27, 2018
Ordered the cord through appliance parts pros, with additional screws and it works! Yay after waiting months and everywhere was out. Thank you.
Read more
More
Genuine Ge part
By: Ge
Part Number: WZ4X416
Replacement mounting screw for securing panels, trim, and internal brackets. Needed when original fasteners are missing, stripped, or damaged.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131202300
Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131276900
This is a Belleville-style spring steel washer used in the suspension or counterweight mounting system of a washing machine. It acts as a spacer and provides spring tension to help absorb vibration during the spin cycle. Replace this washer if the machine vibrates excessively, makes banging noises, or if the original washer is flattened, cracked, or missing.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131303900
Hex washer head screw secures panels, brackets, and drum assemblies in washers. Replace rusted, stripped, or missing screws to prevent rattling.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134197900
A replacement hex washer head screw that secures appliance panels and components. Durable hardware designed to match OEM fit so you can restore proper fastening and reduce rattling or loose parts. What it does:
- Fastens panels, brackets, and assemblies where a 1/4-20 thread is specified
- Provides a built-in washer head to distribute load and resist pull-through
- Commonly used where vibration or movement can loosen standard screws
- Helps stop rattling, misalignment, or loose trim caused by missing or stripped fasteners
What's included: One hex washer head screw (1/4-20 x 0.437) — sold individually Install notes:
- Use the correct screwdriver or socket to avoid stripping the head; tighten until snug, do not over-torque
- Replace any damaged mating hardware or worn threads for a secure fit
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 154754901
Replacement mounting screw for dishwashers. Secures internal components, panels, and brackets. Order when original screw is stripped, missing, or broken.
More
Genuine Lg part
By: Lg
Part Number: 1SZZJJ3010F
Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.
More
Genuine Lg part
By: Lg
Part Number: 1SZZW1N003A
Secures panels, brackets, and internal components in your range. Replace this screw if the original is missing, stripped, or rusted for proper fit.
More
Genuine Lg part
By: Lg
Part Number: 1TTG0402422
This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:
- Fastens plastic and sheet-metal components where a self-tapping thread is needed
- Truss head spreads load to prevent damage to soft or thin materials
- Helps secure control panels, brackets, or trim pieces that require a low-profile head
- Common replacement when original mounting screws are missing, stripped, or corroded
What's included:
- One truss-head tapping screw
Install notes:
- Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
- Start threading straight and let the screw form threads without forcing at an angle
- Disconnect power and follow appliance-specific service safety procedures before working internally
- Replace any damaged mating threads or clips for a secure fit
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 218362501
Replacement screw for securing panels, components, and assemblies in appliances. Needed when original screws are stripped, lost, or damaged during repair.
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241641502
Replacement mounting screw for refrigerator panels, brackets, and trim. Secures loose or missing fasteners to stop rattles and keep components aligned.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241690306
Metal flat washer for refrigerator ice maker auger and other assemblies. Replaces worn, missing, or damaged washers during repairs and reassembly.
Do-It-Yourself Stories from Customers like You
Ice maker auger was scraping side of ice dispenser housing and dropping shavings in my glasses of ice Frank T. • Vancleave , MS • November 25, 2015
Replaced auger nut , washer, and e-ring on end of auger. This allowed the auger to rotate correctly, and not "rub" the sides of the ice dispenser housing.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241690602
Replacement mounting screw secures trim, brackets, and panels inside your refrigerator. Restores proper fit when original screws are missing or stripped.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 242146401
This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:
- Secures panels, trim, or internal components to maintain proper alignment and stability.
- Stops rattling or vibration caused by loose or missing hardware.
- Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
- Small hardware solution for common fit and finish issues.
What's included: One replacement screw as shown on the product page. Install notes:
- Disconnect power and any water supply before starting work.
- Use the correct screwdriver or driver bit to avoid stripping the head.
- Keep track of small parts and work on a stable surface; magnetic trays help.
More