Push Button Start Switch Parts
Genuine Lg part
By: Lg
Part Number: EBF60662911
This is a spark ignition switch assembly with wiring harness that controls the electric igniters on a gas range cooktop. It sends voltage to the spark modules when a burner knob is turned, initiating the clicking ignition sequence. Replace this part if your burners won't spark when turned on, spark continuously even when knobs are in the off position, or if only some burners ignite properly.
This part fixes the following symptoms
-
Doesn't shut off
-
Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You
All the igniters spontaneously began to fire Michael S. • Adams , NY • October 12, 2019
Found a YouTube video online that provided instruction on how to change out the part.
Read more
More
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24
Genuine Whirlpool part
By: Whirlpool
Part Number: W11206737
Fix a range hood control knob that stops responding or only works in one position. This rotary switch restores precise fan and light selection.
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12575501
This limit switch monitors a set condition and opens or closes its contacts when that limit is reached. Replacing a failed switch restores proper safety cutoff and consistent operation of the appliance's heating or movement system. What it does:
- Senses a limit condition at its mounting point (such as temperature or travel/position, depending on model)
- Changes state at a defined threshold to protect components and wiring
- Interrupts power to heat or motor circuits, or signals a control to respond
- Common failure signs: no heat or shuts down early, runs continuously, won't start, or intermittent operation
What's included:
Install notes:
- Disconnect power to the appliance before servicing
- Note wire positions; transfer connectors one at a time or take a photo for reference
- Reinstall in the original orientation so the actuator or sensing surface contacts the correct area
- Address root causes (blocked airflow, binding mechanisms, shorted components) to prevent repeat failures
Do-It-Yourself Stories from Customers like You
Water dispenser quit working Frank K. • Pass Christian , MS • February 20, 2017
I replaced the switch which was bad and also replaced the water inlet valve.
Read more
More
$49.51
- Compare At:
-
$58.92
- You Save:
-
$9.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001656
This is the washer's water level switch that senses tub level via air pressure and provides five selectable fill settings. Replacing a failed switch restores accurate filling and lets the cycle advance properly through wash, rinse, and spin.
- Monitors air pressure from the tub to detect actual water level
- Controls the inlet valves to start/stop filling at the selected setting
- Signals the timer/control to begin agitation and advance the cycle once full
- Common symptoms: overfilling or water keeps running, stops filling too soon or won't fill, inconsistent water levels, cycle won't advance due to incorrect level detection
What's included: 1 water level pressure switch with 5-position rotary selector Install notes:
- Disconnect power and turn off water supply before servicing
- Access the control console; remove the selector knob/dial and panel as needed
- Note wire locations (take a photo), move the harness, and transfer the pressure hose; ensure the hose is clear and firmly seated
- Securely mount the new switch, reassemble the console/knob, restore utilities, and test each fill level
Do-It-Yourself Stories from Customers like You
Water level in Maytag washer was always high and was not adjustable Von D. • San Bernardino , CA • December 21, 2017
Replaced the water level switch and water level pressure switch hose. Video on AppliancePartsPros.com detailed the procedure.
Read more
More
$127.65
- Compare At:
-
$151.90
- You Save:
-
$24.25