Waste Line Mover Traction Control Cable Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10595569
The is is a dishwasher control board. This part is tasked with controlling all of the internal parts of the dishwasher. It regulates the wash cycle, drying cycle, and other parts of a typical washing cycle. This part has many internal components and can become damaged over time or through use. If the dishwasher does not run, starts a cycle but doesn't finish it, or otherwise has functioning issues, this could mean the control board should be replaced.Before starting, make sure the dishwasher is unplugged for safety reasons. Open the door and remove the screws from the inner panel. Separate the panels while disconnecting the wire harness from the control panel. Pull the outer door panel and control panel off the appliance. Install the new part and reconnect wires and ribbons before reassembling the dishwasher. Plug in the appliance and test it.This is a genuine OEM replacement part designed to be compatible with dishwashers by Kenmore and Whirlpool. The control board comes directly from the manufacturer and is sold as a single component.
Do-It-Yourself Stories from Customers like You
It was dead like no power Brian D. • Mount Olive , AL • June 01, 2015
I did a little research on the internet. I check to make sure it was getting power with Ohm meter. I took the front panel off to see what I could find. I found 2 dead roaches in the control board box and there was some brown stuff on the control board. I checked the price to replace the part online and local. AppliancePartsPros had the best price and return policy. I figured I had nothing to lose be trying the part out to see if it would work. I installed the new board and it was alive again....
Read more
More
$181.95
- Compare At:
-
$214.70
- You Save:
-
$32.75
Genuine Whirlpool part
By: Whirlpool
Part Number: W10741603
This electronic control board is the appliance's main control. It coordinates cycle timing and powers key components, helping restore normal operation when the original board fails or causes unresponsive controls, stalled cycles, or error codes.
- Manages inputs from sensors and the user interface to execute programmed cycles
- Distributes power to motors, valves, heaters, fans, and other loads as required
- Stores and runs cycle logic and built-in safety interlocks
- Common symptoms of a failing board: unit won't start, unresponsive controls, cycle won't advance, error codes or blinking lights, intermittent operation
What's included: 1 electronic control board Installation notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Use ESD protection and handle the board by the edges to avoid static damage
- Photograph/label wiring and transfer connectors one at a time to matching terminals
- Follow the tech sheet/service manual after installation; ensure covers/gaskets are reinstalled to protect the board
More
$227.35
- Compare At:
-
$248.05
- You Save:
-
$20.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3954071
This mechanical timer is the cycle control for select top-load washers. It sequences power to the motor, drain pump, and inlet valve so the machine advances through fill, wash, rinse, drain, and spin as designed.
- Controls the timing and order of each wash cycle step
- Sends power to components at the correct times
- Advances the cycle via an internal cam and timer motor
- Common symptoms: won't start or won't advance, stops mid-cycle, runs too long, or the timer knob doesn't move
Install notes:
- Disconnect power before servicing
- Access the control console; remove the dial/knob and mounting screws to release the timer
- Photograph wiring and transfer leads one-for-one to the new timer
- Reinstall, reassemble the console, and test operation
Do-It-Yourself Stories from Customers like You
Broken washing machine timer David E. • Stockholm , NJ • July 04, 2014
The timer from APP was the same as the broken OEM part. Viewing a few youtube DIY videos made replacing the part easier than I thought.
Read more
More
$190.35
- Compare At:
-
$226.52
- You Save:
-
$36.17
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066217
This top hinge supports the hinged top or upper panel, allowing it to lift for service and close securely. Replacing a worn hinge restores smooth motion and proper alignment to help eliminate wobble, scraping, or gaps.
- Provides the pivot point for lifting the top/panel
- Maintains alignment and helps the top seat flat when closed
- Restores smooth opening/closing without binding or rubbing
- Common signs of failure: loose or uneven top, squeaks, difficulty lifting/closing, visible bending or cracks at the hinge
What's included: One top hinge Install notes:
- Disconnect power; also shut off gas and allow all surfaces to cool
- Support the top/panel while removing and installing the hinge to prevent strain
- Transfer and tighten existing mounting screws unless new hardware is provided
- After installation, check alignment and clearances; replacing hinges in pairs can improve fit
Do-It-Yourself Stories from Customers like You
Would not spin Andrew M. • Long Island City , NY • December 18, 2015
Replaced belt and idler arm, just to be safe.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07