Foam Parts

The right door seal and the freezer door seal are easily removed and replaced. They just pull out of the slot. These 2 new gaskets push in easily. The left door has the French Door Mullion, that blocks the removal of the door gasket. There are two screws in the middle that holds it on, and there is a spring at the bottom of the mullion that keeps the mullion in place. The spring can easily be removed, or left in place. There is an electrical connector in the middle of the mullion. As suggested... Read more

Replaced freezer and refrigerator gaskets Read more

Replaced with OEM replacement seal. Watched video on appliance parts pro which showed the proper process to remove the old seal and install a new seal. Surprisingly, it was very quick and only took about 15-20 minutes, including removing the freezer door and re-installing freezer door after seal installation. Unfortunately, a new seal did not cure my problem. 4 days later, I have ice building up again. I studied the new seal and noted there are small gaps at the corners of the freezer... Read more

Based on my model # and serial # the Appliance Parts Pros were able to quickly find and ship the gaskets I needed. The instructional videos showed me how to remove the old and replace with the new. I was able to easily do it myself. Read more

Remove old gasket clean the area and put new gasket on Read more

Replaced door gaskets with new ones Read more

I replaced the gasket. Removing the old one was not easy. I used a razor knife to cut out most of it. And then I used rubbing alcohol to soften the remaining glue and scrapped it out with a small blade screwdriver Read more

Put a new one on. Read more

New seals installed. Read more

Replaced the gaskets on refrigerator and freezer doors. Read more

Removed old seal and replaced with with new seal. It took approximately 5 minutes, the new seal just snaps in on this model of refrigerator. Also, the new seal came nicely boxed to prevent wrinkles. Read more

I ordered the replacement part, took the old seal out, and popped the new one in. It was a straightforward process. The seal came in one piece and I had to make sure the corners were firmly in before smoothing out the sides of the seal. Read more

Removed water out of basin, down to the last inch.. Watched water rise slowly, and felt temperature, warm. This told me it was supply water. Ordered replacement part, two days just as mentioned, Removed as per video. Also choose to replace the waste line check valve, to affordable not too. Working great, except the wood floor not so happy with. One thing at a time. Thanks Read more

Ordered the part via the model number. Removed the old gasket (just pulls out of the indentations and cleaned the channel for the gasket. Pushed into the channel and no more frost forming in the freezer. Read more

All parts arrived in one box - I purchased the tub gasket, lower door gasket and lower door seal. My existing parts were visibly pretty worn out, dishwasher is 12 years old (maybe should have just bought anew one?). Tub gasket was pretty easy, it took me a while to make sure it was even all the way around, after attest run and the subsequent drying heat it fits nicely. Lower door seal went as video, all good, my other one was destroyed from the heat cycles. Could not get the lower door seal... Read more

Replaced it. Read more