Pipe Parts

This dispenser hose routes water from the refrigerator's valve to the dispenser and ice maker, helping restore proper water delivery and prevent leaks or drips at the dispenser. Use as a direct replacement for damaged or leaking lines. What it does:

• Carries water from the inlet valve to the dispenser and ice system
• Replaces cracked, split, or kinked tubing that causes leaks
• Can resolve weak or intermittent dispenser flow caused by restricted or collapsed hose
• Helps prevent water damage by restoring a sealed, secure connection

• Shut off the refrigerator's water supply and disconnect power before starting
• Inspect fittings and clamps; replace any corroded or damaged hardware
• Route hose without sharp bends or kinks and secure with proper clamps
• Turn water back on and check all connections for leaks before restoring normal use

Kit contains two 10 feet inlet hoses.

Size: 6 foot long. Washers not included. This is one hose, for a set with washers order 285363. For inlet hose screen use 285452A and for inlet hose washers use 285448A

The drain pump hose assembly is an OEM part for GE washers. This assembly includes the drain hose, clamp, and connector, providing a complete installation for efficiently draining water from your GE washer. It is designed to withstand the water flow and pressure, providing a reliable connection between your washer and the drainage system to prevent water leaks or spills in your laundry area.

A bad drain hose assembly can occur due to wear and tear, clogs, or damage to the hose or connectors. If you notice symptoms such as water leaks, slow or incomplete drainage, or visible cracks or leaks in the hose, it may be time to replace the assembly.

Symptoms of a bad drain hose assembly include:

• Water leaks during the wash or spin cycles
• Slow or incomplete drainage
• Visible cracks or leaks in the hose or connectors

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This replacement control panel restores the appliance's front console and user interface so buttons and the display work reliably. It provides the visible face and mounting surface for controls and status indicators. What it does:

• Houses the appliance's buttons, touchpads, and display area so you can select settings and see status
• Replaces cracked, scratched, or cosmetically damaged panels that affect appearance or button access
• Helps when buttons are unresponsive due to a damaged front panel
• Restores a clean mounting surface for switches and overlays

• Disconnect power before starting any repair to avoid shock or injury
• Remove trim, bezels, or mounting screws as needed to access the panel; keep fasteners for reassembly
• Handle carefully to avoid scratching or cracking; use proper tools to release clips

This rear panel replaces the cabinet back on compatible Whirlpool appliances to protect internal components and close the cabinet for proper airflow and safety. It restores the appliance's enclosure and keeps wiring and controls covered. What it does:

• Covers and protects internal parts at the back of the appliance from dust and physical damage
• Helps maintain proper airflow paths for cooling and ventilation
• Restores the appliance cabinet for a finished appearance
• Can reduce vibration-related noise by securing rear components

• One rear panel as described

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove access panels and mounting screws to replace the rear panel; retain hardware
• Handle sharp edges carefully and wear gloves to avoid cuts
• Note wiring or components are tucked to the panel, their routing before removal and restore exactly

This trim ring is a replacement surface trim piece that restores the finished look and edge around the appliance opening. It provides a clean, secure edge and replaces bent, cracked, or missing trim to improve appearance and fit. What it does

• Covers and finishes the exposed edge of the appliance opening for a clean appearance
• Secures and aligns adjacent components by providing a stable mounting edge
• Addresses cosmetic damage such as dents, cracks, or paint loss around the opening
• Helps prevent small items from getting caught in the exposed edge

• One trim ring

• Disconnect power to the appliance before starting any repair
• Removal typically requires loosening mounting screws or clips; keep hardware for re-use unless damaged
• Handle edges carefully; part and surrounding metal may be sharp
• If the trim mounts to or around other components (elements, panels), support those parts during removal and reinstallation

These replacement 6" FXF vacuum bags capture dust and debris to restore pickup performance and keep the appliance's airflow and motor compartment cleaner. Designed as a direct-fit consumable for compatible bagged upright and canister vacuums. What it does:

• Collects dirt, dust and debris so particles stay contained for easier disposal
• Helps maintain suction by keeping the vacuum's intake and motor chamber clearer
• Reduces dust and allergen re-distribution compared with a torn or overloaded bag
• Replaces worn or full bags that cause reduced capacity, visible dust escaping, or increased odor

• Always unplug the vacuum before removing or installing bags
• Remove the full bag carefully to avoid spilling debris; seal and dispose per local regulations
• Verify correct orientation and secure fit before operating to avoid leaks
• Replace bags regularly; inspect the inlet collar and seals for wear when servicing

This adapter is a small connector used to join compatible appliance lines or fittings, restoring a secure connection and preventing leaks or loss of function. It's a direct replacement when the original adapter is cracked, corroded, or damaged. What it does

• Connects two mating hoses, tubes, or fittings to re-establish a sealed pathway
• Restores proper flow and helps stop leaks from worn or broken adapters
• Commonly used where a compact, durable coupling is required
• Works as a like-for-like replacement when the original adapter is missing or damaged

• One adapter

• Disconnect power and shut off water or supply lines before servicing
• Verify matching thread type/orientation before installation to avoid cross-threading
• Hand-start threads, then tighten to manufacturer torque; do not overtighten
• Inspect for leaks after restoring power/supplies and running the appliance

This replacement drain hose routes wastewater from the appliance to the household drain, restoring proper draining and preventing leaks or backups. It's a direct-fit service part when the original hose is damaged or clogged. What it does:

• Carries wastewater from the appliance pump to the household drain
• Prevents leaks and reduces risk of water pooling or slow draining
• Replaces cracked, split, or collapsed tubing that causes poor drainage
• Restores proper flow when original hose is kinked or obstructed

• Disconnect power and water supply before beginning any work.
• Verify hose routing and secure clamps or fittings to prevent leaks.
• Inspect adjoining fittings and replace clamps or seals if worn.

This 6-foot rubber hose provides a flexible, durable connection for appliance water/drain routing, helping restore proper flow and reduce leaks. Designed as a direct replacement hose where a 6' rubber line is required. What it does:

• Replaces worn, cracked or brittle 6' rubber hose to stop or prevent leaks.
• Restores flexible routing for water supply or drain lines that need a 6-foot rubber connection.
• Helps eliminate kinks and restricted flow caused by damaged hoses.
• Compatible with standard hose clamps or quick-connect fittings used on many appliances.

• Turn off water and power to the appliance before starting any work.
• Inspect fittings and clamps; replace clamps if corroded or damaged for a secure seal.
• Push hose fully onto the fitting and secure with the proper clamp type; test for leaks before returning appliance to service.