Bottle Support Collar Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316766
The Shock Absorber is an OEM part compatible with Whirlpool washing machines. It is a crucial component that helps reduce vibrations and dampens movement during the spin cycle. The shock absorber absorbs mechanical stresses to prevent the washer tub, suspension springs, and other components from wearing out prematurely.
Causes of a bad shock absorber include wear and tear over time, cracks or breaks from heavy loads, or damage due to impact.
Symptoms of a bad shock absorber include:
- Excessive shaking, vibration or noise during the wash and spin cycles
- The washer walking or moving during operation
- Premature failure of other suspension parts like springs or the washer frame
- Potential leaks if movement stresses plumbing connections
This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More
$71.95
- Compare At:
-
$85.62
- You Save:
-
$13.67
Genuine Bosch part
By: Bosch
Part Number: 11051551
Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.
More
$56.34
- Compare At:
-
$67.04
- You Save:
-
$10.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10082867
Secures the upper spray arm to the water feed. Replace if cracked, broken, or loose to restore proper arm alignment and rotation for the top rack.
Do-It-Yourself Stories from Customers like You
Top rack not cleaning properly Stephen A. • Rogers , AR • March 14, 2018
Replaced the parts ordered.
Read more
More
$8.83
- Compare At:
-
$9.71
- You Save:
-
$0.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10323195
This dispenser water tube routes water from the inlet to the refrigerator's in-door dispenser manifold, helping ensure a steady, leak-free flow to the dispenser.
- Directs water from the supply line to the dispenser manifold
- A damaged or cracked tube can cause leaks, low/erratic dispenser flow, or air in the water line
- Replacing a leaking tube can help restore normal dispenser operation and prevent water damage
What's included: 1 water tube/manifold piece as shown. Installation notes:
- Unplug refrigerator and shut off water supply before service
- Have a towel/container ready to catch residual water
- Note tube routing and connections; push-to-connect fittings may require firm seating for a watertight seal
- After installation, turn water on and check all joints for leaks
Do-It-Yourself Stories from Customers like You
Not cleaning well, silverware very bad. Walter M. • Labelle , FL • December 10, 2017
Replaced spray arms and tube. Found all had debris in them and prohibited water pressure from reaching items. After replacement everything comes out sparkling. Don't understand how the spray arms getting plugged. Almost like waste water is recycled. Turns out to be a very easy project and if needed AppliancePartsPro has information and directions available at your finger tips.!
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Ge part
By: Ge
Part Number: WD12X22503
Mounts and secures the upper spray arm in your dishwasher tub. Replace if cracked, broken, or missing to restore proper spray arm positioning.
Do-It-Yourself Stories from Customers like You
Upper spray arm on GE dishwasher fell off Tommy C. • Austin , TX • March 01, 2021
EASY! I went to your easy look up guide with Serial #, purchased $10.00 of parts, came in two days and fixed it myself. Saved $200.00. You can Do It!!
Read more
More
$9.13
- Compare At:
-
$10.04
- You Save:
-
$0.91
Genuine Ge part
By: Ge
Part Number: WD18X10051
Molded adapter plate that secures and seals spray system components in your dishwasher. Replace if cracked, warped, or broken to stop leaks.
Do-It-Yourself Stories from Customers like You
Broken part Melissa L. • Shreveport , LA • April 22, 2016
My husband
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Lg part
By: Lg
Part Number: 4930JA3043A
This dispenser lever holder is the mounting bracket behind the refrigerator's dispenser paddle. It supports and aligns the lever and switch so water or ice dispenses reliably when the paddle is pressed.
- Holds and guides the dispenser lever and actuator switch inside the dispenser housing
- Provides a secure pivot point for smooth paddle movement
- Helps ensure consistent activation of water and ice dispensing
- Damage can cause a loose or stuck paddle, intermittent dispensing, or no dispense
What's included: One lever holder Install notes:
- Disconnect power and shut off the water supply before servicing
- Remove the dispenser panel/escutcheon to access the lever assembly; note part orientation
- Transfer the lever, switch, and return spring to the new holder and secure with the original fasteners
- Restore power/water and test dispensing before reinstalling trim
Do-It-Yourself Stories from Customers like You
The ice door was broke. John F. • Succasunna , NJ • April 09, 2022
I ordered the parts and watched your video(which was great) and the fix went perfect.Thanks!
Read more
More
$11.47
- Compare At:
-
$12.62
- You Save:
-
$1.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10163171
Replaces broken or worn washer shock absorber that controls tub movement during spin. Installs on washer suspension to reduce vibration and shaking.
Do-It-Yourself Stories from Customers like You
I needed to replace my shock absorbers on my washing machine Darrell B. • Kuna , ID • January 28, 2016
I took the front panel off which exposed the front two shock absorbers. But I could still only replace the front left shock. I could not get access to the one on the right. I then took the back panel off which gave me access to both back shocks and the other front shock. A simple twist and they were done. The longest part of the job was taking the back panel off.
Read more
More
$85.95
- Compare At:
-
$103.14
- You Save:
-
$17.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 242029301
Small structural block that secures and aligns the refrigerator or freezer handle to the door. Replace when cracked, broken, or missing to restore handle fit.
Do-It-Yourself Stories from Customers like You
Itty bitty piece attaching freezer handle to the door broke. Oana H. • Colorado Springs , CO • January 06, 2023
Found the Block on your website. I was happy I didn’t need to order the whole handlebar instead.
Read more
More
$42.39
- Compare At:
-
$50.44
- You Save:
-
$8.05
Genuine Ge part
By: Ge
Part Number: WH01X10343
Suspension damper shock absorber for front-load washers. Replaces cracked, weak, or broken shocks causing excessive vibration and off-balance loads.
Do-It-Yourself Stories from Customers like You
Washer easily got out of balance and begun to make a loud noise and move the washer Michael S. • Bellbrook , OH • September 01, 2015
I researched the problem and found that normal wear and tear will cause the Damper shocks and the Suspension spring to fail. I decided to replace all Damper Shocks and the suspension Springs since I had the washer apart already.
The Suspension Spring requires a lot of pull to get it in place correctly. I made a hook tool (from political yard sign frame) to hook the old spring to remove and pull the new spring up. It helps to have a second person use leverage (use a short 2x2 board) under the...
Read more
More
$52.51
- Compare At:
-
$69.49
- You Save:
-
$16.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385160
Secures the dishwasher's water inlet tube in position, preventing movement and strain on fittings. Replace if cracked, broken, or missing to restore support.
Do-It-Yourself Stories from Customers like You
The water parts were broken the washer is about 16 years old Katrina M. • Fontana , CA • July 14, 2018
We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set.
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268843
There is a split at the 3 O'clock position. Color: white. It measures about 3 inches wide by 4 inches high.
Do-It-Yourself Stories from Customers like You
The water supply tube had come loose and melted when in contact with the heating element. Mark B. • Franklin , IN • October 20, 2017
I was able to purchase all needed parts through Appliance Parts Pros. It was an easy fix, and only took about 10 minutes.
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Frigidaire part
By: Frigidaire
Part Number: 137107000
Secures the washer's inner basket to the drive hub, keeping the tub centered and stable during spin. Replace if cracked, corroded, or bolts are damaged.
Do-It-Yourself Stories from Customers like You
Leaking washer tub Hugh S. • Miami , FL • June 25, 2016
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off...
Read more
More
$23.38
- Compare At:
-
$27.82
- You Save:
-
$4.44
Genuine Frigidaire part
By: Frigidaire
Part Number: 240396102
Retainer bar mounts to refrigerator door shelf to secure tall bottles and containers. Replace if cracked, broken, or missing to prevent items from tipping.
Do-It-Yourself Stories from Customers like You
My shelves were broken. Jeri B. • Beechmont , KY • September 13, 2020
Very simple I just unlatched the old ones and re placed them
Read more
More
$16.61
- Compare At:
-
$19.93
- You Save:
-
$3.32
Genuine Frigidaire part
By: Frigidaire
Part Number: 241856501
Hinge component that guides the cam for self-closing door action. Replace if cracked, broken, or worn to restore smooth door swing and proper alignment.
Do-It-Yourself Stories from Customers like You
Door stop was broken and the bracket was bent Vicki K. • Taylors , SC • June 23, 2023
I replaced all parts on the bottom of the door to make it smooth to open. It was easy and took about 15 mins total.
Read more
More
$19.73
- Compare At:
-
$23.48
- You Save:
-
$3.75
Genuine Whirlpool part
By: Whirlpool
Part Number: W10572852
Fixes food freezing in fridge and popping/tapping noises from damper. Restores proper airflow between freezer and fresh food sections. 5-15 minute repair.
Do-It-Yourself Stories from Customers like You
Freezing on top shelf of fridge John W. • Mullica Hill , NJ • February 02, 2015
Replaced diffuser. Original damper drive was broken. Repaced with this upgrade design which channels the air flow differently preventing "freeze up". Job required 15 min.
Read more
More
$189.95
- Compare At:
-
$226.04
- You Save:
-
$36.09