Pipe Parts

This drain hose directs wastewater away from the appliance to the household drain, helping prevent standing water and poor drainage. Durable, flexible construction lets you route the hose for a secure connection. What it does:

• Carries wastewater from the appliance pump to the household drain or garbage disposal
• Restores proper draining when the existing hose is cracked, split, or clogged
• Helps prevent leaks and water pooling caused by damaged or collapsed hoses
• Allows proper routing to avoid kinks that can restrict flow

• Disconnect power to the appliance and turn off the water supply before starting
• Inspect hose clamps and connections; replace clamps if corroded or loose
• Route the hose without sharp bends or kinks and secure per the appliance's routing path

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

The Drain Hose is an OEM part for Whirlpool washing machines. It is a flexible tube that diverts water from the washer tub during drain cycles, guiding it out of the appliance and into a nearby drain source such as a sink. 

Causes of a bad drain hose can include cracks or abrasions developing over time due to repeated bending and flexing during drain cycles. Mineral or hard water buildup inside the hose can also lead to clogs. Other potential causes are physical damage from rodents, pets, or accidental punctures.

Symptoms of a bad drain hose include:

• Incomplete draining or water remaining in the washer tub after cycles  
• Leaks or drips forming around the drain hose connection point
• Puddles or water pooling under or around the washing machine
• Slow drainage during spin cycles

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washer models.

This replacement hose routes fluid or air within your appliance, providing a secure, leak-resistant path between components. A cracked, brittle, or kinked hose can cause leaks or performance issues—replacing it helps restore proper operation.

• Provides a sealed pathway for water or air between internal components
• Supports correct fill, circulation, draining, or pressure sensing as designed
• Prevents leaks at connections when properly clamped and routed
• Common symptoms: visible cracks or kinks, water leaks, standing water, or related fault/error codes

• Disconnect power; shut off the water supply
• Place towels or a pan to catch residual water before removal
• Note hose routing and clamp positions; take photos for reference
• Reuse or replace clamps as needed; secure connections and check for leaks after reassembly

This replacement 5-foot fill hose with elbow delivers water from the household supply to the appliance, restoring proper fill flow and helping stop leaks from worn or damaged inlet lines. Designed as a direct-replacement assembly for compatible refrigerators. What it does:

• Carries water from the supply valve to the appliance's inlet connection.
• Elbow fitting provides a low-profile connection to reduce kinking at tight inlets.
• Replaces cracked, split, or leaking hoses that can cause slow/no fill or visible leaks.
• Restores reliable water delivery for ice makers and dispensers when the original hose is failing.

• Two 5' fill hoses with elbow fittings (quantity: 2).

• Shut off the water supply and unplug the appliance before starting any work.
• Inspect fittings and replace any damaged clamps; hand-start fittings, then tighten with an appropriate wrench—do not overtighten.
• Check for leaks after turning the water back on and run a fill cycle to verify proper operation.

This replacement hose routes water where the appliance needs it, helping restore proper filling and draining to prevent leaks or poor performance. Designed to match the original fitting and flow path for a reliable repair. What it does:

• Directs water between components to enable normal fill and drain cycles
• Prevents leaks when properly connected and clamped
• Restores proper drainage and prevents standing water or slow emptying
• Helps stop symptoms like intermittent filling, error codes related to water flow, or visible leaking

• Disconnect power and shut off the water supply before servicing
• Inspect and replace any worn clamps or fittings for a secure seal
• Route hose as original to avoid kinks and ensure proper flow

This overflow elbow is a small drain fitting that routes excess water away from the appliance to prevent spills and water damage. It restores proper overflow/drain flow so the unit can safely divert unwanted water. What it does:

• Directs overflow or drain water from the appliance plumbing to the drain path
• Replaces cracked, clogged, or leaking elbows that can cause pooling or leaks
• Helps restore normal draining behavior and reduces risk of water where it shouldn't be
• Fits into the appliance's existing drain/overflow tubing and connections

• One overflow elbow

• Inspect surrounding hoses and clips; replace any damaged components for a reliable repair
• Disconnect power and water supply before beginning work to avoid electrical shock or flooding
• Use appropriate clamps or fittings to ensure a secure, leak-free connection

This water inlet pipe routes water from the refrigerator's supply to the dispenser and ice-making system, helping restore proper water flow and stop leaks at the inlet tubing. Durable molded tube designed to match factory fit. What it does:

• Carries water from the household supply to the fridge's dispenser and ice maker
• Replaces cracked, pinched, or corroded inlet tubing that can cause leaks
• Restores water flow when a damaged inlet pipe prevents dispensing or ice production
• Matches OEM shape to align with mounting points and fittings

• Turn off and disconnect power to the appliance before servicing.
• Shut off the water supply and drain remaining water from the line before removing the old pipe.
• Inspect and replace any worn seals, clips, or fittings; tighten connections to OEM torque specifications.

This cabinet cover assembly is the outer panel that protects internal components and restores the appliance's exterior appearance. It provides a clean, secure enclosure to help keep parts safe and the unit looking factory-fresh. What it does:

• Covers and protects internal wiring, controls, and components from dust and incidental contact
• Restores the appliance's exterior look after damage or wear
• Helps reduce air flow and light into internal compartments, supporting normal operation
• May reduce vibration noise by providing a secure outer enclosure

• Disconnect power to the appliance before beginning any service
• Handle the panel carefully—edges may be sharp; wear gloves and eye protection
• Basic hand tools typically required; follow the appliance's service manual for exact removal/installation steps

This inlet hose connects the home water supply to the appliance so it can fill properly. It replaces a worn or leaking supply hose to restore safe, reliable water flow for normal cycles. What it does:

• Directs incoming water from the household supply to the appliance inlet valve
• Works with the appliance's inlet valve and fittings to allow proper fill and rinse actions
• Commonly replaces hoses that leak, spray, kink, or block water flow
• Helps stop slow fills or intermittent filling caused by damaged or deteriorated hoses

• One inlet hose

• Turn off water supply and disconnect power before starting work
• Inspect and replace any damaged O-rings or fittings; use approved replacement fittings if needed
• Hand-tighten connections, then snug with a wrench—avoid over-tightening to prevent damage
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks