Machine Plate Parts

Left-hand support bracket that secures and aligns the left side of dishwasher assembly. Replace if cracked, broken, or missing to restore fit.

There is a split at the 3 O'clock position. Color: white. It measures about 3 inches wide by 4 inches high.

This bracket mounts inside the dishwasher tub and supports the middle spray arm manifold tube, holding it securely in position. It ensures the spray arm tube stays aligned so water is properly distributed during the wash cycle. Replace this bracket if the middle spray arm wobbles, falls out of place, or if dishes on the upper rack are not getting clean due to poor water coverage.

Metal mounting plate that secures the microwave chassis to the wall or cabinet. Replace if bracket is bent, cracked, or missing during installation.

Secures the dishwasher's water inlet tube in position, preventing movement and strain on fittings. Replace if cracked, broken, or missing to restore support.

Right-side oven rack support mounts to the interior wall to hold and guide oven racks at proper heights. Replace if cracked, broken, or missing.

Right-hand plastic bracket that secures the upper dish rack inside your dishwasher. Replace if cracked, broken, or worn from repeated loading and unloading.

Reduces drum vibration during spin cycles. Replace if washer shakes excessively or drum moves too much. Mounts between drum and base. Sold individually.

This friction damper assembly adds controlled resistance to a door or panel so it opens and closes smoothly. Replacing a worn damper helps prevent sudden drops or slamming and restores a solid, quiet feel to the motion. What it does:

• Provides controlled friction to the hinge mechanism for smooth, damped movement
• Works with the hinge system to help balance door/panel weight
• Reduces slamming and impact, improving overall feel and sound
• Symptoms include the door dropping open quickly, slamming, uneven/loose motion, or clicking/squeaking near the hinges

• 1 friction damper assembly

• Disconnect power to the appliance before servicing
• Access the hinge/damper mounting area per your model's service documentation
• Support the door/panel during removal and match the original orientation and hardware
• After installation, cycle the door open/closed to ensure smooth, balanced motion before reassembly

Mounts on the pump outlet to secure and center the lower spray arm. Replace if cracked, broken, or worn to restore proper arm rotation and alignment.

Secures the upper broil element to the oven cavity top. Replace if your original bracket is cracked, broken, or missing to restore stable mounting.

Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.

This upper dishrack track mounts to the dishwasher tub wall and provides a smooth glide path for the rack rollers. Replacing a damaged track restores easy in-and-out movement and helps keep the upper rack aligned and secure.

• Guides and supports the upper dishrack as it slides in and out
• Maintains rack alignment to prevent binding or derailing
• Typical failure signs: rack jams or falls off, rough/squeaky travel, visible cracks or breaks in the track
• Can keep the rack from fully sliding in, making the door harder to close

• Disconnect power and turn off the water supply before servicing
• Remove the upper rack by releasing the end caps/stops
• Unfasten the old track from the tub (screws/clips), then position and secure the new track
• Reinstall the rack and end caps; verify smooth rack travel before restoring power and water

Damper assembly mounts to the washer base to support the drum and reduce vibration. Replace if cracked, broken, or worn to restore stability.

Replacement wall mounting plate for over-the-range microwaves. Secures microwave to wall studs. Order if original plate is damaged, bent, or missing.

Channels water from pump to tiered spray system in your dishwasher. Replace if conduit is cracked, clogged, or broken to restore upper rack coverage.