Run Vent Thermal Fuse Parts
Genuine Samsung part
By: Samsung
Part Number: DC47-00017A
Dryer won't heat or stops heating mid-cycle? The high limit thermostat cuts power when temperatures spike. Easy 15-minute fix with video guide.
Do-It-Yourself Stories from Customers like You
My dryer would not heat up Chris R. • Glen Saint Mary , FL • January 07, 2015
When starting my dryer the motor would power up and rotoe the drum and blower. Afetr about 20-30 seconds the igniter would come on then the gas valve would open and I would get heat for about 6 or 7 seconds then it would shut off. I know the burner is suppoed to cycle on and off but once the burner shut off it would not come bqack on unless I shut the dryer off and then back on. I checked for continuity on the thermistor, the thermal fuse and the high temp sensor. All three of them appeared to...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10467289
The Water Temperature Sensor is an OEM part for Whirlpool washing machines. This sensor ensures the water is reaching the proper temperature at each stage of the wash cycle. Note: The sensor does not include the seal W11590578. Order separately if needed.
Causes of a bad temperature sensor can be failures over time due to mechanical wear, thermal stress on electronic components, or damage from leaks/flooding inside the unit.
Symptoms of a bad water temperature sensor include:
- Inability to switch between wash steps or advance through the cycle
- Erratic or inconsistent temperature readings
- Failure alarms or error codes displayed
- Improper or incomplete washing even on high heat settings
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
F2 e3 error code on front load duet washer Mark M. • Saratoga Springs , NY • September 16, 2016
Replace the water temperature sensor and still had the error code. While I had the back of the machine open I ran the washer. I traced the black wires from the temperature sensor and wiggled them as the washer was running. At one zip tie every time i moved the wires the washer would stop running and the error code would flash. Sure enough, like many others posted, the vibration from the machine had split the wire. I spiced the wire back together and have not had a problem since.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 216731001
Evaporator coils frozen solid? Defrost thermostat senses coil temperature and triggers the heater to melt frost buildup. Straightforward replacement.
Do-It-Yourself Stories from Customers like You
No cooling from refrigerator lights worked but compressor did not run Jeff B. • Ovalo , TX • May 07, 2015
Checked compressor windings - ok. Start relay looked no rattle or burning. Start capacitor seamed ok but hard to check. No 120VC to start relay at any time. Ordered thermistor, and electronic control unit. Figuring it was a bad thermistor not telling the ECU it was warm and to turn on the compressor. Or the ECU was damaged and was not sending the 120v to the compressor. Changed the thermistor first (cheapest part and as Appliance parts pros has a return policy I wanted to start there). ...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10096921
Drain hose routes wastewater from your washer tub to household plumbing. Replace if cracked, leaking, worn through, or damaged from wear or friction.
Do-It-Yourself Stories from Customers like You
Washing machine not draining completely Kenneth L. • Telford , PA • October 16, 2016
I searched YouTube and found several videos that helped me diagnose the most probable cause. I learned how to open the cabinet and access the parts from the videos. I ordered a new discharge hose and a replacement pump. The parts came in the next day with the standard shipping option! It turned out that the old discharge hose was blocked. I decided to replace the pump also since I had the machine open and the new pump was only $22. It's amazing what you can learn online!
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DA47-00095E
The Refrigerator Defrost Thermal Fuse Assembly is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part plays a crucial role in the defrost system, ensuring that the freezer and refrigerator compartments remain at the correct temperatures. By regulating the defrost cycle, it helps prevent overheating and potential damage to your appliance. Compatible with a wide range of Samsung refrigerator models, this thermal fuse assembly guarantees a secure fit and reliable operation. Installing the genuine OEM Refrigerator Defrost Thermal Fuse Assembly means you can trust the quality and longevity of your refrigerator's defrost system, enhancing overall efficiency and extending the life of your appliance. Whether you're replacing a faulty fuse or upgrading your refrigerator's components, this genuine Samsung part provides the dependable performance you need for a smoothly running kitchen.
Do-It-Yourself Stories from Customers like You
Refrigerator was quitting after defrost cycle. Owner was reseting by unpluging unit. Larry G. • Syracuse , IN • March 24, 2014
I found freezer thermal link was open and not closing when cold. Replacement fixed problem.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10402110
Dishwasher won't turn on or has no power? This thermal fuse kit protects against overheating. Simple DIY fix takes about 20 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
No power on the dishwasher Jim C. • Burnet , TX • July 17, 2014
Checked online with app and figured out the most common cause of the problem after checking the most obvious causes. Ordered the fuse received on the second day. Installation was very simple and the dishwasher was again functional.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8541818
The heater box houses your dryer's heating element and screen. Replace this component when rusted, corroded, or the screen is damaged causing snags or stains.
Do-It-Yourself Stories from Customers like You
The grill face in the dryer where the heat comes out was worn and had developed edges where clothes were catching and pulling thread Willard W. • Rochester , NY • April 06, 2017
Replaced the heater tube. Had to open the back up, removed the heating element and then replaced the heater tube. Then I put it all together again and everything is fine now.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137539200
Dryer won't heat or shows E66 error? The thermal limiter prevents overheating by monitoring airflow. Moderate DIY repair, requires rear panel access.
Do-It-Yourself Stories from Customers like You
E66 error code. Door open came on and dryer would not turn on at all other than display of error. Bruce H. • South Elgin , IL • March 15, 2014
I actually found a post from another brave soul who was willing to try to fix his, and had stated when he put the new limiter switch in, it fixed the problem.
Since the whole back of the dryer needs to come off to get to the burner, and the limiter switch is inexpensive it seemed like common sense to take this approach first. After all, you don't put a new engine in your car if all it needs is a new battery!
I also found posts that an overheating event could fry the main control board, and...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10165425
Freezer evaporator coil icing up and refrigerator not cooling? This defrost thermostat regulates temperature to prevent frost buildup. 2-3 hour DIY repair.
Do-It-Yourself Stories from Customers like You
Coil in freezer iced up and refrigerator would not cool David M. • Ambridge , PA • December 10, 2015
My unit has a bottom freezer that is a drawer. I had to remove the drawer, rack, glides, glide tracks, and ice maker to remove the rear panel. This was a little difficult but after researching a few videos on line I learned some tricks that made it easier. I used a hair dryer to melt the ice. This is best done with 2 people having one at the back to sponge the water into a bowl from the pan to avoid a water mess. Using a bolt meter I checked the heating element and found it had continuity. I...
Read more
More
Genuine Lg part
By: Lg
Part Number: ACJ73350401
Connects water inlet valve to tub in your washer. Replace if cracked, leaking, or ports are stripped. Ensures secure, leak-proof connection during cycles.
Do-It-Yourself Stories from Customers like You
Water was leaking into the tub of the washing machine. Shawn F. • Apache Junction , AZ • January 10, 2021
We watched the video on how to fix the problem. Ordered the parts and they came very quickly. My husband was able to repair the washer without any problems or complications. We are thrilled that we could solve the problem by using your parts and avoid buying a new washer. Thank you!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11366227
Replacement dispenser hose channels detergent from the tray to the wash drum. Needed when original is cracked, torn, or leaking due to wear or rubbing.
Do-It-Yourself Stories from Customers like You
Washing machine leaking from water inlet and temperature sensor seal Richard H. • Park Ridge , NJ • March 21, 2015
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time.
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D510523
Fix dryer overheating issues with this thermistor assembly. Monitors temperature and sends readings to the control board. DIY-friendly repair part.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134786100
This moisture sensor consists of two metal strips typically mounted inside the dryer drum area that detect the moisture level in clothing during a drying cycle. It signals the control board to end the cycle when clothes reach the desired dryness. Replace this sensor if your dryer shuts off too early with clothes still damp, runs too long, or if the auto-dry cycle no longer functions properly.
Do-It-Yourself Stories from Customers like You
The sensor-moisture clip was broken off and needed to be replaced. Edgar D. • Bradford , AR • April 06, 2014
Simple unscrewed the set screw, removed the broken sensor-moisture part, attached the leads, and reattached the part to the back of the dryer. Took about 4 minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP307473
Dryer won't start or heat? A blown thermal fuse cuts all power to protect against overheating. Easy 30-minute DIY fix with multimeter testing.
Do-It-Yourself Stories from Customers like You
Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack Richard M. • Cornish , NH • October 19, 2020
Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DA61-01800A
The Refrigerator Temperature Sensor Bracket is an essential component for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures precise temperature monitoring, which is crucial for keeping your food fresh and your appliance running efficiently. Designed specifically for Samsung refrigerators, the sensor bracket provides a secure and stable mounting point for the temperature sensor, enhancing its accuracy and reliability. By replacing a worn or damaged sensor bracket with this high-quality genuine OEM part, you can prevent temperature fluctuations and avoid potential cooling issues. Installation is straightforward, allowing you to restore your refrigerator's functionality quickly and easily. Investing in the Refrigerator Temperature Sensor Bracket means trusting in a durable and compatible solution that supports the longevity and efficiency of your Samsung appliance. Experience the peace of mind that comes with using a part designed to meet the exact specifications of your refrigerator, ensuring consistent performance and a better overall cooling experience.
Do-It-Yourself Stories from Customers like You
Water overflowing into ice bucket David C. • Wichita Falls , TX • June 17, 2015
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001762
Dryer won't start or run? A blown thermal fuse is the likely cause. This safety component cuts power if temperatures get too high. Easy 15-min fix.
Do-It-Yourself Stories from Customers like You
Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack Richard M. • Cornish , NH • October 19, 2020
Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short...
Read more
More