194394Fxrs1109 Parts

This genuine Midwest Engine carburetor body gasket can be used as a replacement part for lawn mowers, snowblowers, tillers, generators, and wood chippers. The purpose of a carburetor body gasket is to seal off the carburetor and prevent it from taking in air when it is not supposed to do so. Symptoms of a malfunctioning or broken carburetor body gasket can include strange vibrations from the engine while operating the appliance, a “hunting” idle and an engine that runs lean, or a backfiring engine. If any of these symptoms occur and can be directly attributed to a broken carburetor body gasket or a gasket that has come unsealed over time from neglect or general wear and tear, it should be replaced with this OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This carburetor body gasket is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Cub Cadet, and Simplicity.

This replacement part is a starter pulley. This is a genuine replacement part made by Midwest Engine. Starter pulleys are common in different types of machinery that operate using different parts. Pulleys are able to connect different parts together and allow them to move during use so that the engine runs smoothly. A new starter pulley might be needed if the current one is no longer working as normal. This can include being damaged or stripped down over time. Due to the friction that pulleys frequently experience, becoming worn down is common and this part should be replaced when this happens. Be sure to wear work gloves as needed during this repair as to not get injured. This starter pulley is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

A needle and seat kit is used similarly to a float valve. It allows fuel into the carburetor chamber when it is empty and stops more fuel from entering the same chamber when it is already full. With regular use and age, the needle and seat kit or valve will wear out, become damaged, or stop working efficiently. Signs of this include an engine that continuously revs and will not idle or one that won't start at all. To improve performance and prevent further damages, a new needle and seal kit must be installed.Installing a needle and seat kit is simple with the proper tools. Wear gloves for protection. Remove the damaged or worn needle and seal kit, clean the area, and replace it with a genuine OEM replacement part. Test the device before putting it back to use.This needle and seat kit is an authentic OEM part. It is supplied by the original manufacturer and sold individually. It is comprised of high-quality, durable materials. The needle and seat kit is compatible with Toro and Briggs and Stratton brands. The kit can be used with a variety of machines, including lawnmowers, generators, lawn tractors, snowblowers, and other devices with small engines.

Here is a replacement armature-magneto, also known as an ignition coil, for use with small engines. The part is capable of producing a high voltage, which is then used by the spark plugs, to start the engine. When the ignition coil is not working properly, it will be difficult and sometimes impossible to start the engine. If the spark plugs are not the problem with the engine starting, it could be due to a broken part on the armature-magneto due to wear and tear, the elements, or other forces. The armature-magneto may need to be replaced if it has failed. This is a genuine OEM replacement part sold individually. Spark plug boots will be sold separately. This part can be used for many models of snowblowers, tillers, lawn mowers, wood chippers, and other small engines. Brands compatible with the armature magneto include Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Simplicity, and MasterCut. Buyers will always want to ensure they are getting the proper ignition coil for their make and model.

When a starter rope is pulled, it will uncoil and provide tension to the spring and then engage the starter clutch, which turns the crankshaft to crank the engine. The starter clutch could have problems due to natural wear. It could also be damaged due to an incident with the machine. Corrosion could also be a factor since it is made from metal. When there are issues with the starter clutch, it will be difficult to get the engine started. The best course of action is for the operator to replace the clutch. This is a genuine OEM replacement starter clutch that is sold individually. The part can be used for many types of equipment including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, wood chippers, generators, and other small engines. Compatible brands include Craftsman, Toro, Cub Cadet, Lawn-Boy Simplicity, MTD, Murray, and Briggs & Stratton. Operators should ensure they are getting the correct starter clutch as a replacement.

This rewind spring, also known as the recoil spring, is an essential part in a small engine. Its job is to rewind the pull rope back into the starter housing and, should there be difficulty in retraction, it is often because the rewind spring has failed. This OEM replacement part works in the engines and starter systems of tillers, pressure washers, lawn mowers, snowblowers, leaf blowers, generators, edgers, and wood chippers. It is suited to brands like Toro, Cub Cadet, Briggs & Stratton, Lawn Boy, MTD, and others. The primary component is the spring, which is found inside of a metal housing. This part ships individually, and should the housing need to be replaced, it is a separate purchase.

The starter is responsible for creating the electrical current that provides the power to turn the engine. It uses a pulley to engage the drive cup, which attaches to the flywheel and starts the engine when pulled. This specific model is designed for use with single-cylinder engines and is an OEM replacement that features a 12-volt power supply and 16-tooth plastic gear. The motor itself can become worn out over time and require replacement. In some cases, the starter can be damaged directly. If the starter is not in working order, the equipment will not run. This genuine OEM part will get the job done. This starter motor is designed to be compatible with more than 150 models of Briggs & Stratton engines on various lawn and garden equipment products such as lawn mowers, small engines, snowblowers, generators, and wood chippers. It is made of durable plastic and metal components and built to exact OEM standards.

This replacement part is a gasket. This is a genuine replacement part made by Midwest Engine. This part works with the engine in different types of machines or appliances to ensure that a seal can fill the space between two different parts. A new gasket might be needed if the current one is missing or damaged. This can be from an isolated incident or from normal wear and tear over time. If the gasket is causing certain gasses or parts to leak or become loose, be sure to replace this part immediately. Work gloves are also recommended when working near or around the engine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.