97046354400 Parts

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This replacement part is a clean-out tool. It is a genuine replacement part made by Husqvarna. This part works with different appliances and it meant to be used to clean different parts. This ensures that the overall appliance works properly.A new clean-out tool might be needed if the current one is damaged or missing. If the tool becomes too dirty and is unable to clean anymore it is recommended that it be replaced as soon as possible. Due to the nature of this tool, it is common that it can become worn down over time and need to be replaced. Be sure to wear work gloves during this repair. This clean-out tool is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

The snowblower is designed to remove snow from the surface over which it is run, but no snowblower is designed to totally eliminate all of the materials beneath it. Most leave a small skim coating that ensures the augers don't scrape along the ground and damage a walkway or drive. However, many are also equipped with a scraper bar that removes even more of the snow than the skid plates allow. If the scraper is damaged or bent, it will mean a less satisfactory performance by the blower. This is an OEM part that is very easy to install with little more than a properly sized screwdriver and a socket or wrench set. This replacement scraper bar is designed to fit many different snowblowers made by Husqvarna and Poulan, and works with more than 100 models. It ships individually with mounting hardware.

This part is a clean-out mounting clamp that is used on snowblowers. The purpose of the clean-out mounting clamp is to hold the clean-out tool. This component attaches to the auger housing and is manufactured out of a heavy-duty black metal material.A new clean-out mounting clamp may be needed if the original is cracked, broken, or damaged in any way. If the clean-out mounting clamp is missing from the snowblower, the operator may wish to replace this part out of convenience, although this part is not essential to the operation of the snowblower. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clean-out mounting clamp is a genuine Husqvarna part. It is sold individually. This specific clean-out mounting clamp is compatible with snow blowers that are manufactured by the Husqvarna, Poulan, and Jonsered brands.

This is an auger shaft bearing that is used on many snowblowers created by Husqvarna. The auger shaft bearing connects to the auger plate. A bearing helps the shaft rotate easily inside of a snowblower. Through use or time, the auger shaft bearing can become damaged or break and will need to be replaced. If the bearing is damaghed, it can cause vibrating, wobbling, or binding and may prevent the shaft from rotating. Failed bearings also sometimes create a squealing sound coming from the snowblower.If any of these things are occurring with a snowblower, the auger bearing will need to be replaced. Place the blower on a flat, stable surface and disconnect the spark plug wire before beginning. The belt cover and auger belt will need to be removed along with the roller bracket. Remove the auger housing to get access to the auger shaft bearing to replace it. Reassemble the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual unit. The auger shaft bearing is made to be used with several snowblowers manufactured by Husqvarna.

This replacement part is dipstick control. It is a genuine replacement part made by Husqvarna. This part is used to measure the oil levels in an engine so that the user is aware of when to change the oil. This part is usually only found in machines that use an engine to operate.A new dipstick might be needed if the current one is missing or broken. Be sure to wear work gloves during this repair as there might still be oil on the previous part. It is recommended that the engine be completely turned off. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This ignition key is a genuine Husqvarna part, sold individually. This ignition key can be used as a replacement part in a snowblower. The purpose of the ignition key in a snowblower is to power on the engine.The ignition key in a snowblower might be irreparably damaged from general wear and tear with long-term use or as the result of an accident that punctures, dents, erodes, warps, or otherwise damages the component. If the ignition key cannot function as it should, it should be replaced by this genuine OEM replacement part. The snowblower will not be able to function until the ignition key is properly replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This ignition key is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.

This lock nut is a genuine Husqvarna part, sold individually. This lock nut can be used as a replacement part in lawnmowers, snowblowers, and tillers. The purpose of a lock nut for one of these small engine outdoor appliances is to serve as a fastening component in conjunction with a bolt.The lock nut in a small engine outdoor appliance is a small component that can be easily lost or misplaced at any point within the typical lifespan of the appliance. The lock nut can also suffer damage that can reduce or negate its functionality, in which case the lock nut should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This lock nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Murray, and Ariens.

This carburetor repair kit is a genuine Husqvarna part, sold individually. This carburetor repair kit can be used as a replacement part in a snowblower. The carburetor repair kit comes with all of the necessary components required to repair a damaged or malfunctioning carburetor, the purpose of which is to combine the air and fuel intake into the proper ratio to feed to the spark plugs and facilitate the ignition of the engine.The carburetor repair kit might have to be ordered as a genuine OEM part to facilitate the repair or replacement process of a broken carburetor. Hard starting, not starting, an unusual noises like clicking from the interior of the blower could all be signs that the carburetor is in need of repairs. If this occurs, the items in the carburetor repair kit should be used to fix the machinery in accordance with the instructions found either within the kit or from a relevant appliance manual or handbook.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This carburetor repair kit is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a wheel. This is a genuine replacement part made by Husqvarna. This part is usually found in lawnmowers and is responsible for helping the user make turns while using the device. The machine is typically easy to maneuver as long as the wheels are in working condition. New wheels might be needed if the current ones are damaged in any way including being punctured, flat, or worn down, which can happen with normal use. Be sure to wear work gloves during this repair. It is also recommended that the engine is completely turned off to prevent injury.This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.