Cwe4000ace Parts

Best Seller

Genuine Whirlpool part

Appliance Light Bulb

4.9 (373)

By: Whirlpool

Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

Dimming or flickering light
Complete lack of illumination inside the appliance
Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

$17.76

Compare At:: $20.96
You Save:: $3.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Light Bulb

4.9 (119)

By: Whirlpool

Part Number: WP22002263

The Dryer Light Bulb is an OEM part for Whirlpool dryers. This bulb is specifically designed to provide illumination inside the dryer drum, allowing for better visibility when loading and unloading laundry. It ensures a well-lit drying environment.

Causes of a bad dryer light bulb can include normal wear and tear, electrical issues, or accidental breakage.

Symptoms of a bad dryer light bulb may include:

The bulb not turning on when the dryer door is open.
Dim or flickering light inside the dryer drum.
A burnt-out or broken bulb.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019

Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking. I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was... Read more

$15.55

Compare At:: $18.50
You Save:: $2.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Terminal Block

4.8 (36)

By: Whirlpool

Part Number: WPW10245259

The Terminal Block is an OEM part for Whirlpool ranges. It serves as a crucial connection point for the range’s electrical wiring, ensuring a safe and reliable transfer of power to the appliance.

Over time, terminal blocks can deteriorate due to factors such as heat exposure, electrical surges, or wear and tear. When the terminal block becomes damaged or corroded, it can lead to poor electrical connections or potential safety hazards.

Symptoms of a bad terminal block include:

Burnt or scorched connections
Intermittent power loss to the range
Difficulty in the range heating up properly
Visible damage or corrosion on the terminal block

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start
Element will not heat
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven would only heat up to 347° f in bake mode Chris M. • Scottsdale , AZ • October 25, 2021

I determined the hidden bake element below the oven cavity was not working, because the bottom of the oven was cold during normal use. If you have a built-in microwave + oven combination (mine is KitchenAid Model No. KEMS308SSS05), this is a difficult repair. The engineer who designed this oven should be invited to succeed elsewhere. It is impossible to access the bake element from the inside of the oven, so the How To video associated with this part will not help you. I had to remove the... Read more

$26.95

Compare At:: $32.07
You Save:: $5.12

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Bake Element (Lower Oven)

5.0 (8)

By: Whirlpool

Part Number: WP74010761

This bake element supplies the lower-oven heat your range or wall oven needs for baking and roasting. Replace it when the oven won't heat properly in Bake or the element shows visible damage.

Provides primary heat from the bottom of the oven during Bake cycles
Helps maintain even, consistent oven temperature
Common failure symptoms: no heat in Bake, slow preheat, uneven or undercooked results
Visual signs of failure: element is blistered, cracked, or broken

What's included: 1 bake element assembly Install notes:

Disconnect power at the breaker and allow the oven to cool completely
Access from inside the oven; remove mounting screws, pull the element forward, and move the two wire leads to the new element one at a time
Support wires so they don't slip behind the liner; ensure snug terminal connections
Restore power and run a short Bake cycle to verify operation

This part fixes the following symptoms

Little to no heat when baking

Do-It-Yourself Stories from Customers like You Baking element burned out Billy C. • Dixon , KY • November 01, 2015

The delivery of the element was superfast, less than 24 hrs. Unplug the Stove from the receptical! Took a phippips screwdriver and took out the 2 screws holding it, and tilted it upwards a bit and pulled the element out about 3 inches an unhooked the wires. Hooked the wires up to the new element and pushed it back into the holes and put the 2 screws back in and turned the stove on and that was all there was to that. Read more

$77.71

Compare At:: $91.70
You Save:: $13.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Door Seal (Horizontal, Top/Bottom)

4.9 (16)

By: Whirlpool

Part Number: WP7212P006-60

This horizontal oven door seal lines the top and bottom edges of the door opening to keep heat contained inside the cavity. Replacing a worn seal restores stable temperatures, more efficient preheating, and consistent baking results.

Seals the oven opening along the top and bottom edges to reduce heat loss
Helps maintain set temperature and overall cooking performance
Replaces cracked, frayed, flattened, or brittle horizontal gasket
Common signs include visible gaps, heat escaping around the door, longer preheat times, and temperature fluctuations

What's included: One horizontal door seal. Install notes:

Disconnect power and allow the oven to cool completely before servicing
Open the door and carefully pull the old seal straight out of the retainer
Note clip/retainer positions as you remove the old seal and reuse them as designed
Press the new seal evenly into place without stretching; ensure corners are fully seated for a uniform seal

Do-It-Yourself Stories from Customers like You Oven would not heat up past 100 degrees and the light switch was broken Gary B. • Redondo Beach , CA • August 28, 2015

A new ignitor was installed, and a new light switch was installed Read more

$56.95

Compare At:: $67.77
You Save:: $10.82

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (Black)

5.0 (1)

By: Whirlpool

Part Number: WP7101P126-60

This factory fastener secures panels, trim, or brackets on your appliance. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned for proper operation and a clean, finished appearance.

Fastens exterior panels, trim pieces, or internal brackets to the appliance chassis
Replaces lost, damaged, or stripped hardware
Helps prevent vibration, rattling, and gaps between parts
Common signs you need this screw: missing hardware, loose or misaligned panel/trim, stripped head or threads

What's included: One screw Install notes:

Disconnect power before servicing; also shut off the gas supply
Use the correct driver; start the screw by hand to avoid cross-threading
Tighten snugly—do not overtighten to prevent stripping or cracking adjacent parts
Repair or replace the mounting point before installing

Do-It-Yourself Stories from Customers like You Oven element was burnedout Robert J. • Hope , ME • February 08, 2015

Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: WP7101P072-60

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Door Gasket (Side)

5.0 (1)

By: Whirlpool

Part Number: WP7212P015-60

This side door gasket forms the sealing edge for the appliance door to restore a tight seal and reduce leaks, drafts, or moisture build-up. Replacing a worn or torn side gasket helps the door sit flush and improves overall performance. What it does

Seals the door side edge to stop air, moisture or heat from escaping
Common symptom of a failing gasket: visible gaps, drafts, water or steam leaks
Can reduce rattling or uneven door closure caused by a warped or compressed seal
Restores proper contact between door and frame for consistent operation

What's included One side door gasket Install notes

Disconnect power and allow the appliance to cool before starting
Remove the old gasket carefully; retain any clips or screws if re-used per manufacturer guidance
Press the new gasket into the channel evenly; check for full seating along the entire side edge
After installation, close the door and inspect for uniform contact; adjust door alignment if needed

Do-It-Yourself Stories from Customers like You Broken oven seals heat was leaking Rocio D. • Arlington Heights , IL • June 05, 2020

The seal that goes from side to side was supposed to have a thin hook, the one I got was wider so I took a screwdriver and make the hole in the oven wide enough for the hooks to get in (yes, I cheated! But I knew it before hand). Changed the others seals and ready to go!! Read more

$41.46

Compare At:: $49.34
You Save:: $7.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Oven Rack (Standard)

5.0 (1)

By: Whirlpool

Part Number: W10282521

A replacement oven rack that restores stable support for cookware and baking pans, helping maintain even cooking and safe handling. Designed to fit the original rack slots for reliable, everyday oven use. What it does

Provides a stable shelf for cookware, bakeware and roasting pans.
Replaces bent, rusted or damaged racks that catch or tilt during use.
Helps restore proper airflow and consistent cooking when racks sit level.
Visible, functional repair that avoids sliding or sticking when moving trays.

What's included One oven rack. Install notes

Fits into existing oven rack slides; remove old rack by sliding out and lifting if needed.
No tools required for typical replacement; handle with oven mitts if warm.
Inspect rack stops and guide rails for damage before installing.
Follow oven manufacturer safety guidelines: disconnect power or ensure appliance is cool before servicing.

Do-It-Yourself Stories from Customers like You Needed another shelf Daniel S. • Arlington Heights , IL • March 15, 2017

Bought another one. Read more

$80.95