Ersd48509/Lp Parts

Fix burners that won't light or spark continuously with this igniter. Common cause when burners fail to ignite. Moderately difficult installation.

Oven not heating on the bottom? This bake element restores lower-cavity heat for even baking and roasting. Straightforward DIY repair for most ranges.

Replace a worn or missing brass nut securing burner fittings. Restores tight connections in the manifold area. May require pliers or special wrench.

Restore bright, reliable visibility inside your cooking appliance with this 10-watt, 12-volt halogen light bulb. It replaces a burned-out lamp to help you clearly see food progress and keep an eye on cleanup. What it does:

• Provides bright interior illumination inside the appliance
• Replaces a failed or dim light to restore visibility
• Common symptoms: light won't turn on, flickering, or noticeably dim output
• Built to match original 10W/12V halogen specifications for proper performance

• 1 halogen bulb (10W, 12V)

• Disconnect power at the breaker before servicing; allow the area to cool completely
• Handle the bulb with clean gloves or a tissue—skin oils can shorten halogen bulb life
• Insert fully and ensure the light housing/cover is secured before restoring power
• Use only the specified wattage and voltage recommended for your model

Fix an oven that won't heat properly with this temperature sensor kit. Restores accurate temperature monitoring. Requires splicing with ceramic wire nuts.

Replacement micro switch set that restores reliable door and lid sensing for Samsung appliances. Replaces worn or damaged micro switches so your appliance can detect open/closed positions and resume correct operation. What it does:

• Detects door or lid open/closed position and signals the control to allow or stop operation.
• Restores safety interlock behavior so the appliance won't run with the door or lid open.
• Helps resolve symptoms such as the appliance not starting, stopping mid-cycle, or failing to detect a closed door/lid.
• Eliminates intermittent operation caused by loose, broken, or worn switch contacts.

• Disconnect power (unplug or shut off circuit breaker) before accessing internal components.
• Remove the appropriate access panel or door assembly to reach the switches; keep track of fasteners.
• Note or photograph wire and connector positions before disconnecting; reconnect exactly as found.
• Test switches with a multimeter.

This is a replacement cooling fan assembly designed to restore airflow in the refrigerator condenser/vent area for stable temperatures and improved efficiency. Fits service replacement applications where the original fan is damaged or fails. What it does:

• Circulates air across condenser/evaporator components to help maintain proper cooling
• Reduces overheating by improving airflow through heat-exchange areas
• Stops symptoms such as weak cooling, warm spots, or a non-spinning fan
• Helps eliminate abnormal fan noise when the motor or blades are failing

• Disconnect power to the appliance before any service to avoid shock or injury
• Access may require removing panels or shelving; keep fasteners and clips for reassembly
• Handle the fan blades and motor carefully to avoid bending or damage
• If wiring connectors or mounts are worn, replace or secure them during installation

If your oven won't ignite or heat, the hot surface igniter likely needs replacement. This part ignites gas to heat your oven. DIY-friendly repair.

Replace your rusty or damaged large burner cap to restore even flame distribution and protect your gas burner from spills. Direct-fit part installs in minutes.

This burner O-ring seals the D burner assembly on gas cooktops. It helps keep the fuel path airtight and protected from spills, supporting consistent ignition and a stable, properly shaped flame.

• Maintains a seal between burner components to preserve correct gas/air mixture
• Helps prevent leaks and moisture intrusion around the burner well
• Can contribute to resolving weak/uneven flame, flame lifting, or hard-to-ignite burner when the original seal is worn
• Replaces cracked, flattened, swollen, or missing O-rings

• Turn off gas supply and disconnect power. Allow the cooktop to cool completely.
• Remove grates, burner caps, and the burner head to access the O-ring; note the original orientation.
• Clean mating surfaces; install the new O-ring carefully without twisting or pinching.
• Reassemble, restore gas/power, and perform a leak check. Test burner operation.

Secures panels, brackets, and trim inside your appliance. Replace this wafer head screw if the original is missing, stripped, or damaged during repairs.

The Electronic Sewing Machine Spark Wire Harness is a reliable component designed to keep your Samsung electronic sewing machine running smoothly. This genuine OEM part ensures a perfect fit and seamless compatibility with a variety of Samsung sewing machine models. Crafted from high-quality materials, the spark wire harness provides consistent electrical connections, enhancing the performance and durability of your appliance. By replacing a faulty or worn-out harness with this genuine OEM part, you can prevent common issues such as intermittent sewing errors or complete machine shutdowns. Installation is straightforward, allowing you to quickly restore your sewing machineGÇÖs functionality without professional assistance. Investing in the Electronic Sewing Machine Spark Wire Harness not only maintains the precision and efficiency of your Samsung sewing machine but also extends its lifespan, ensuring you can continue your creative projects with confidence and ease.

The Front Burner Tube Base Assembly for Rear-Engine Riding Mower is designed to ensure optimal performance of your riding mowerGÇÖs combustion system. This essential component serves as the foundation for the burner tube, facilitating efficient fuel combustion and consistent engine operation. Crafted from high-quality materials, it offers durability and resistance to wear, extending the lifespan of your mower. Installation is straightforward, allowing for a quick and hassle-free replacement. This genuine OEM part guarantees a perfect fit and seamless integration with your rear-engine riding mower, maintaining the integrity and reliability of your equipment. If your original burner tube base is damaged, cracked, or showing signs of wear, the Front Burner Tube Base Assembly for Rear-Engine Riding Mower provides an effective solution to restore your mowerGÇÖs functionality. Enhance your mowerGÇÖs performance with this reliable component, ensuring smooth and efficient operation season after season.

Plastic insert snaps onto range leg to restore proper leveling and stability. Replace if cracked, worn, or missing to protect flooring and reduce vibration.

Set of two hinges for Black or Artic models. For Stainless models, order 701035.