Lfns22520s Parts

The Inner Door Bezel is an OEM replacement part for Speed Queen washing machines. It is a white plastic panel that mounts to the inside of the washer door providing structure and rigidity. The bezel acts as a backbone for attaching other door components like the door gasket, switches, insulation, and more.

Symptoms of a bad inner door bezel include:

• loose door components
• missing or damaged mounting tabs
• cracks along seams or corners
• uneven gaps around the door opening.

Causes of failure can be wear and tear from opening and closing the door thousands of times, exposure to cleaning chemicals or solvents over time, or physical damage from accidents.

The Pressure Sensor is an OEM part for Speedqueen commercial washers. It plays an important safety role by actively monitoring water levels and pressure changes within the washing machine. Located internally, the sensor communicates water level status to the control module.

Causes of a bad pressure sensor can include failure or degradation of electronic components over time. Damage from impact or liquid ingress may also cause sensors to malfunction.

Symptoms of a bad Pressure Sensor include:

• Erratic or inconsistent water levels during fills and drains
• Inability to detect rises or falls in water pressure
• Fault codes or error messages on the control panel
• Safety issues from unregulated water valves

The Inner Door Bezel is an OEM part for Speedqueen commercial-grade washing machines. This bezel frames the inside of the washer door opening, protecting internal components from damage. 

Causes of a bad Inner Door Bezel can include wear and tear from repeated use, exposure to harsh chemicals or cleaning solutions, or accidental impact damage. 

Symptoms of a bad Inner Door Bezel include:

• Cracks or breaks in the protective plastic material
• Loose or missing mounting screws  
• Scratches, discoloration, or other cosmetic damage
• The ability for liquid or debris to enter the washer opening

This commercial-grade Speedqueen part restores both function and appearance. It is specifically engineered to withstand high-traffic commercial laundering needs.

This drain pump assembly removes wastewater from the tub during the drain and spin cycles, helping your washer empty quickly and complete cycles reliably. Replace a failing pump to fix standing water, aborted cycles, or drain-related error codes. What it does:

• Pumps water from the tub to the household drain during drain and spin
• Restores proper draining so cycles can finish as intended
• Common failure symptoms: no or slow draining, water left in tub, loud humming/grinding from the pump area, small leaks near the pump, or drain fault errors
• 100–127V, 60 Hz "yellow" variant per OEM specification

• One drain pump assembly

• Disconnect power and turn off water supply before servicing
• Expect residual water; place towels or a pan to catch spills
• Note hose and wire positions; transfer any mounting hardware from the old pump
• Inspect and clear the drain hose and tub-to-pump hose for blockages before testing for leaks

The Water Valve is an OEM part for Speed Queen washing machines. It is a vital component responsible for controlling water flow into the washer tub during fill cycles. The water valve precisely regulates water pressure and volume to efficiently fill the washer tub without leaks or excess water usage.  

Symptoms of a bad water valve include:

• Slow or erratic water fill 
• Inability to fill the washer tub fully
• Water leaks from the valve area
• Fluctuating or unregulated water pressure  

Causes of a bad water valve can include mineral buildup interfering with valve function, worn seals allowing water to bypass the valve or damage to internal components impeding proper operation.

This black door boot seal forms a watertight barrier between the door and front tub on a front-load washer, keeping wash water contained. Replace a worn or torn seal to stop leaks and restore reliable operation. What it does

• Seals the gap between the door and front tub to prevent water leaks
• Helps direct water back into the drum during operation
• Maintains proper containment when filling, washing, and spinning
• Common failure signs: water leaking from the door/front, visible tears or cracks, or the gasket pulling loose

• Includes: 1 black door boot seal

• Disconnect power and turn off water supply before servicing
• Open the door and carefully release the inner and outer retaining clamps/springs
• Note the seal's orientation (alignment marks/drain ports) and install the new seal the same way
• Ensure both inner and outer lips are fully seated; reinstall clamps and run a short test cycle to check for leaks

A durable door hinge that secures the appliance door to the cabinet and provides a smooth pivot for opening and closing. Replacing a worn hinge restores alignment to reduce sagging, rubbing, and poor latching. What it does:

• Provides a secure pivot point so the door opens and closes smoothly.
• Restores correct door alignment to prevent sagging, scraping, or uneven gaps.
• Helps the door latch and seal properly for safe, reliable operation.
• Reduces noise and binding caused by worn or bent hinge hardware.

• Disconnect power (and water supply for washers) before starting any repair.
• Support or remove the door to prevent dropping; use appropriate hand tools.
• Tighten mounting fasteners to firm engagement, then check door swing and latch operation.

The Outer Door Bezel Kit is an OEM replacement part for Speed Queen washing machines. As an exterior component, the door bezel surrounds and protects the outer edges of the washer door opening. 

Causes of a damaged bezel can include impact from repeated opening and closing of the door or general wear over extended use. Cracks or other deformations reduce its protective function.

Symptoms of a bad door bezel include: 

• Exposed edges of the door opening that could pinch or scratch skin 
• Loose or sagging pieces that impact the overall appearance
• Reduced structural integrity where the door seals close tightly

Replacing the bezel kit with this OEM Speed Queen part restores proper protection of the doorway. It maintains the washer's overall performance, comfort of use, and aesthetic appeal. This replacement is also compatible with residential washer models by Alliance Laundry Systems and some Dexter models.

This is a stainless-steel #8 x 1/2" Torx screw used to secure panels and components on Speed Queen appliances. Stainless construction resists corrosion for reliable fastened connections in laundry equipment. What it does

• Secures console, trim, panels, and internal brackets where a #8 x 1/2" Torx fastener is specified.
• Replaces missing or damaged screws that can cause loose panels, rattling, or misaligned components.
• Stainless-steel construction helps prevent rust in wet or humid laundry environments.
• Small, common fastener for service and reassembly after repairs.

• One stainless-steel #8 x 1/2" Torx screw.

• Use the correct Torx driver size to avoid stripping the screw head.
• Tighten finger-tight then snug; avoid over-torquing which can strip threads or crack plastic.
• Disconnect power (and water if applicable) before working on appliance internals to reduce shock or injury risk.

This large hose clamp secures flexible washing machine hoses and sealed door boots to prevent leaks and keep connections tight. Durable metal construction helps maintain a reliable seal at hose fittings. What it does:

• Clamps flexible hoses or bellows to fittings, sealing water or drain connections
• Keeps door boot or drain hose from slipping off and causing leaks
• Stops dripping or puddles caused by loose or missing clamps
• Works where a wider-band, heavy-duty clamp is required for a secure fit

• Disconnect power and turn off the water supply before servicing the appliance
• Loosen and remove the old clamp with a screwdriver or nut driver; position the new clamp and tighten securely
• Replace corroded or damaged clamps rather than reusing to ensure a proper seal

This poly-V belt kit replaces a worn or broken drive belt to restore power transfer from the motor to the washer/dryer drive system, helping the appliance resume normal spin and agitation. What it does

• Replaces the poly-V (serpentine-style) drive belt that routes over motor and idler pulleys.
• Restores proper drum or agitator rotation when belt wear, glazing, or breakage prevents spinning.
• Reduces slipping and squealing caused by a stretched or glazed belt.
• Works with the machine's pulley system to deliver smooth, reliable power transfer.

• Disconnect power (and water if applicable) before starting any service.
• Remove the access panel or cabinet to access the belt and pulleys.
• Inspect motor, idler, and drum pulleys for wear or damage and replace if needed before installing the new belt.
• Route the belt following the OEM belt routing diagram and verify proper tension before reassembly.

This bearing housing and hub kit replaces the tub support assembly that holds the inner tub in place, restoring smooth rotation and reducing noise and vibration. Ideal when worn bearings or a damaged hub cause rumbling or wobble. What it does:

• Supports the inner tub and secures the hub for proper drum rotation
• Replaces worn bearing surfaces that cause loud noise or rough spinning
• Helps stop wobble or uneven tub movement linked to failed bearings/hub
• Restores correct alignment to reduce stress on the drive system

• Disconnect power and water supply before beginning work
• Support the tub and follow service manual steps; disassemble top/front panels as required
• Inspect related seals and bearings; replace damaged seals to prevent leaks

This motor and rod assembly kit restores the drive components that power the washer's agitator or drum, helping return normal wash and spin motion for reliable cleaning performance. What it does:

• Replaces worn or failed motor and rod components that transfer power to the agitator/drum
• Restores agitation and spin functions when the washer won't agitate or spin properly
• Helps eliminate drivetrain noises caused by worn rod or motor coupling
• Works as the direct-drive linkage between the motor and wash basket for consistent cycles

• One motor and rod assembly kit

• Disconnect power before starting and follow the washer manufacturer's service instructions
• Basic mechanical skills and common tools are typically required; some models may require lifting the cabinet or removing the basket
• Inspect related components (mounts, fasteners, electrical connections) during replacement and tighten or replace as needed

This small sealing washer fits the washer's water pressure assembly to help maintain a proper watertight seal at the pressure/valve connection. Replacing a worn washer reduces leaks and helps the fill/pressure system operate as intended. What it does

• Provides a watertight seal at the water pressure/valve connection to prevent leaks.
• Helps maintain correct pressure feedback to the washer's water control system.
• Wear or damage can allow leaking at the valve or inconsistent fill behavior.
• Simple, low-cost part commonly replaced when troubleshooting valve leaks.

• Turn off household water supply and unplug the washer before replacing.
• Remove the valve/pressure fitting carefully and replace the old washer with the new one, making sure it seats flat and undamaged.
• Inspect mating surfaces for debris or damage; clean before reassembly.
• If leaks or fill issues persist after replacement, inspect related seals, fittings, and the pressure switch/valve assembly.

This tub-to-pump drain hose connects the washer tub to the drain pump, routing wastewater from the wash tub to the pump for removal. Replacing a worn or damaged hose helps stop leaks and restore reliable draining. What it does:

• Channels wastewater from the tub to the drain pump so the washer can expel water
• Commonly replaced when you see leaks at the hose, cracks, or split seams
• Can resolve symptoms like standing water in the tub, slow or no drain, or water on the floor near the washer
• Works with the factory clamps and fittings at the tub outlet and pump inlet

• One tub-to-pump drain hose

• Disconnect power to the washer and turn off the water supply before starting
• Drain remaining water from the tub and position towels to catch any spills
• Inspect and reuse or replace hose clamps as needed; ensure secure, leak-free connections

A replacement cord lead-in that routes incoming power into the appliance and provides a secure connection point for the main wiring. Restores reliable electrical feed and helps eliminate intermittent power or no-power issues. What it does:

• Transfers household power from the external cord to the appliance's internal wiring
• Provides a stable inlet connection and strain relief for the incoming power cable
• Commonly replaced for symptoms such as no power, intermittent power, blown fuses, or visible damage/corrosion at the inlet
• Matches OEM fit and mounting for a direct replacement when the part number is correct

• One cord lead-in assembly

• Disconnect all power at the breaker or unplug the appliance before starting work
• Route wires and secure strain relief per OEM guidance; tighten terminal connections firmly but do not overtighten
• If wiring or terminal damage is present, replace or repair per local electrical code