Swf216lxsqo Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

A durable door hinge that secures the appliance door to the cabinet and provides a smooth pivot for opening and closing. Replacing a worn hinge restores alignment to reduce sagging, rubbing, and poor latching. What it does:

• Provides a secure pivot point so the door opens and closes smoothly.
• Restores correct door alignment to prevent sagging, scraping, or uneven gaps.
• Helps the door latch and seal properly for safe, reliable operation.
• Reduces noise and binding caused by worn or bent hinge hardware.

• Disconnect power (and water supply for washers) before starting any repair.
• Support or remove the door to prevent dropping; use appropriate hand tools.
• Tighten mounting fasteners to firm engagement, then check door swing and latch operation.

This is a stainless-steel #8 x 1/2" Torx screw used to secure panels and components on Speed Queen appliances. Stainless construction resists corrosion for reliable fastened connections in laundry equipment. What it does

• Secures console, trim, panels, and internal brackets where a #8 x 1/2" Torx fastener is specified.
• Replaces missing or damaged screws that can cause loose panels, rattling, or misaligned components.
• Stainless-steel construction helps prevent rust in wet or humid laundry environments.
• Small, common fastener for service and reassembly after repairs.

• One stainless-steel #8 x 1/2" Torx screw.

• Use the correct Torx driver size to avoid stripping the screw head.
• Tighten finger-tight then snug; avoid over-torquing which can strip threads or crack plastic.
• Disconnect power (and water if applicable) before working on appliance internals to reduce shock or injury risk.

This washer shock absorber kit (T) stabilizes the tub during spin to control vibration and noise. Replacing a worn damper restores smoother operation and helps prevent banging, "walking," and out-of-balance interruptions. What it does:

• Damps tub movement between the suspension and cabinet during spin
• Helps reduce vibration, thumping, and excessive shaking
• Can address symptoms like loud banging in spin or the washer moving
• Helps resolve out-of-balance shutdowns or extended spin times

• 1 T-type shock absorber

• Disconnect power and turn off water supply before servicing
• Access the shock by removing the appropriate panel; support the tub to relieve load
• Reuse or transfer existing fasteners as designed for your model
• After installation, level the washer and run a test spin

This switch knob fits onto the control switch shaft so you can select settings and operate the machine. Replacing a cracked, stripped, or missing knob restores smooth, reliable control and keeps daily use straightforward. What it does:

• Fits over the control switch shaft to turn the switch and choose settings
• Restores a secure grip and clear position when selecting options
• Helps resolve issues like slipping when turning or a knob that won't stay attached
• Common symptoms: cracked knob, stripped insert, loose or missing knob, difficulty selecting settings

• 1 switch knob

• Disconnect power before servicing
• Pull the old knob straight off; remove any retaining clip or set screw if present and save it
• Align the flat/D-shaft orientation and press the new knob fully onto the switch shaft
• Test the switch through all positions to confirm proper engagement

This commercial dispenser valve kit replaces the valve assembly that controls measured delivery of detergent or chemical in commercial laundry equipment, restoring reliable dispense and preventing leaks or no-flow issues. What it does

• Controls timed release of detergent/chemical from the dispenser into the washer
• Opens and closes to meter fluid flow when a dispense cycle runs
• Helps stop leaks or drips when functioning correctly
• Commonly replaced for no dispense, intermittent flow, or visible leaking

• One commercial dispenser valve kit (valve assembly)

• Disconnect power and shut off chemical/detergent supply before starting
• Inspect and replace any worn seals or fittings when assembling the new valve
• Tighten connections to manufacturer torque specs and check for leaks after installation
• Run a test dispense cycle to verify correct operation

This water mixing valve assembly controls and blends hot and cold water during washer fill cycles to help achieve the selected wash temperature. Designed as a direct replacement valve for affected Speed Queen top-load and commercial washers. What it does

• Directs and mixes incoming hot and cold water to regulate fill temperature.
• Helps the washer reach and maintain the selected wash temperature for proper cleaning.
• Common symptom: washer fills with only hot or only cold water or delivers inconsistent water temperature.
• Can cause extended fill times or temperature-related cycle issues when failing.

• Disconnect power and shut off water supply before beginning replacement.
• Turn off and drain inlet hoses to avoid water spills; have towels or a bucket ready.
• Basic hand tools required; follow OEM service manual for proper disassembly and reassembly.
• Inspect inlet hoses and seals; check for leaks and test a full cycle after installation.

This Drive belt keeps the washer's transmission and tub turning by transferring motor power to the drum. Replaces a worn or broken belt to restore normal agitation and spinning performance. What it does:

• Transfers motor torque to the transmission/drum so the washer agitates and spins
• Stops slippage that can cause slow or no spin/agitate cycles
• Helps eliminate squealing or burning-rubber noises when the belt is worn
• Prevents further motor/drive damage from a broken or glazed belt

• Disconnect power and water supply before starting any repairs
• Remove access panels and shift the drum to relieve belt tension for removal
• Inspect pulleys, idler, and motor shaft for wear or debris before installing the new belt
• Route the belt according to the OEM diagram, then test run the machine

This small sealing washer fits the washer's water pressure assembly to help maintain a proper watertight seal at the pressure/valve connection. Replacing a worn washer reduces leaks and helps the fill/pressure system operate as intended. What it does

• Provides a watertight seal at the water pressure/valve connection to prevent leaks.
• Helps maintain correct pressure feedback to the washer's water control system.
• Wear or damage can allow leaking at the valve or inconsistent fill behavior.
• Simple, low-cost part commonly replaced when troubleshooting valve leaks.

• Turn off household water supply and unplug the washer before replacing.
• Remove the valve/pressure fitting carefully and replace the old washer with the new one, making sure it seats flat and undamaged.
• Inspect mating surfaces for debris or damage; clean before reassembly.
• If leaks or fill issues persist after replacement, inspect related seals, fittings, and the pressure switch/valve assembly.

A specialized service wrench designed for Horizon/TL-L style Speed Queen machines to aid technicians during maintenance. Provides a secure grip for installing and removing the specific service fasteners used on these transmissions and hubs. What it does:

• Fits the Horizon/TL-L service fastener to allow controlled tightening or loosening
• Speeds routine service tasks that require the OEM service wrench
• Reduces risk of damaging the fastener when compared with improvised tools
• Useful for maintenance and repair work performed on transmission/hub assemblies

• One Horizon/TL-L service wrench

• Intended for qualified service technicians familiar with Speed Queen equipment
• Disconnect power and follow all safety procedures before servicing
• Use the tool only for its intended fastener; do not use as a pry bar or hammer
• Inspect the tool before use; replace if damaged

A replacement self-tapping pan-head screw sized 10 x 5/8 in for securing appliance panels, trim and small assemblies. Restores proper fastening where original screws are missing, stripped or corroded. What it does

• Cuts its own mating thread in sheet metal or plastic for secure fastening
• Commonly used to attach control panels, trim pieces and small brackets
• Helps stop rattles, loose panels and misaligned trim when original fasteners fail
• Corrosion-resistant finish resists rust in typical laundry appliance environments

• Use the correctly sized screwdriver or driver bit to avoid stripping the head
• Start in a pilot hole if material is brittle or if reinstalling into worn threads
• Do not over-torque; stop when the head seats flush to avoid cracking or stripping
• Disconnect power and follow appliance-specific safety procedures before working

This front dispenser drawer replaces a cracked, broken, or worn detergent/bleach drawer so detergent dispenses cleanly and the washer front looks finished. It restores the dispenser opening and provides a proper seal for product delivery. What it does:

• Replaces the front-facing detergent/bleach dispenser drawer assembly
• Keeps detergent and additives contained for proper dispensing during cycles
• Prevents leaks and drips from a damaged or cracked drawer face
• Improves fit and appearance of the washer's dispenser area

• Disconnect power and follow the washer manufacturer's safety instructions before servicing
• Remove the old drawer by pulling out and releasing any retaining clips; install the new drawer by aligning and snapping into place
• Check for proper seating and smooth operation before returning the washer to service