297Aabp Parts

The filter pre-cleaner is a first-stage cleaning system for the air filter in combustion engines. Typically, a pre-cleaner will be made of a dense foam material and will fit around a cartridge-style air filter, adding an extra level of filtration for any air coming into the engine. Over time, both the pre-cleaner and the filter can become clogged with regular use and typically need to be replaced as part of routine maintenance. However, intermittent clogs and damage can also occur that would necessitate an emergency replacement. Many people keep an extra set on hand in case of urgent repair needs. This genuine OEM filter pre-cleaner is specifically designed to fit select Briggs & Stratton engine air filters. It is compatible with over 150 machines from the brand, as well as select Toro machines that feature Briggs & Stratton engines. Replacing the air filter is simple but gloves should always be worn for hand protection. Allow the engine to cool completely and check the air filter if you are replacing the pre-cleaner to ensure that it doesn't need to be changed, as well.

This air filter fits a number of gasoline-powered small engines that power various landscaping tools such as lawn mowers, woodchippers, generators, and other small engine powered devices. While most users understand the importance of an air filter for lawn equipment like mowers and edgers that kick up large amounts of dust and create clogging particulate, clean air filters are also essential for these other devices as well. Outdoor air is much dustier than most outdoor workers realize. With few exceptions, small engines create more particulate, much of it unseen. By their nature, air filters are designed to wear out by capturing so many airborne particles that air ceases to pass through the filter's elements. If a gasoline engine has enough fuel, yet it refuses to start, it's a good idea to check the air filter. Simply remove the air filter cover and take out the air filter. Start the engine. If it runs normally, the problem is the air filter. However, do not run the engine without an air filter for long periods of time. This replacement filter is OEM certified to be an exact replica of the original equipment filter. It is compatible with engines made by Craftsman, Toro, Briggs & Stratton, Simplicity, and Snapper.

This exhaust gasket is located to fit between the exhaust system and the engine exhaust. It is used on many types of lawn and garden equipment. When operating correctly, the gasket will prevent exhaust from leaking. It also has sufficient flex to allow parts to expand when heat is present. The main purpose of a gasket is to prevent leaking. When the gasket is failing, it often leads to exhaust leaking from the joint.Many situations can cause an exhaust gasket to fail. The part can lose flexibility, dry out, or experience cracks. If the gasket chafes, it will lose its heat resistance and begin to dry out. When there is excess engine vibration, the gaskets can also tear. If this occurs, checking the engine mounts is important to ensure they are tightened and fully secure. Replacing the gasket involves removing the engine, taking out the old gasket, and putting a new one in its place.This exhaust gasket is a genuine OEM component sourced directly from the manufacturer. It is sold individually and fits lawnmowers, wood chippers, snowblowers, and generators from Briggs & Stratton, Toro, Cub Cadet, Snapper, MTD, and Simplicity.

This oil seal is a genuine Midwest Engine replacement part for outdoor appliances with small engines, such as lawn mowers, snowblowers, and wood-chippers. The function of an oil seal is to protect an appliance from accumulating dirt, debris, and gunk in its inner workings as well as to avoid potential oil leaks.If an engine is subject to oil leaks, it could be because of a damaged or malfunctioning oil seal. Diagnosing an oil leak can be tricky, as there are many aspects of the engine that, if compromised, can lead to leakage. This can be tested by running the engine until the leak occurs and then checking to see if the leak originally stems from the oil seal. If it is ascertained that the leak is indeed a result of a damaged oil seal, this genuine OEM oil seal can serve as a replacement part in the case that damage has occurred to the original. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This oil seal is compatible with the following brands: Briggs and Stratton, Simplicity, and Toro.

This fuel pump is a genuine Midwest Engine part, sold individually. This fuel pump can be used as a replacement part or a lawn tractor. The purpose of a fuel pump is to provide a passageway for fuel to channel through the fuel line and into the fuel tank.The fuel pump of a lawn mower or a lawn tractor might eventually have to be replaced in the event that it suffers damage and cannot perform its crucial function. If the fuel pump has been torn, scraped, punctured, or eroded from general wear and tear with long-term use or as the result of a direct impact with a hard object such as a rock or a curb, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel pump is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Cub Cadet, Simplicity, and Toro.

Small motors require electrical supplies, and the voltage regulator in any engine maintains the voltage from the power source at an acceptable level. It will keep voltage in a specific range that the device can tolerate. This voltage regulator is designed for use in small engines made by or used in motors for Briggs & Stratton, Toro, and Vanguard machines. It is meant for 10-16 amp voltage regulation and includes all of the wiring needed to do the job. It works well with an array of garden machine and lawn machine engines, and will regulate the electrical systems. This is an OEM replacement part that requires a screwdriver and socket set to both remove and then replace. The voltage regular ships individually.

This crankcase gasket is designed to be used in many varieties of lawn and garden equipment. The gasket creates an airtight seal between the crankcase and the cylinder assembly. The crankcase gasket is made from strong composite materials but can wear out, deteriorate, or break as time goes on. When this occurs, other components will no longer have a seal, and the lawn equipment may not work properly.The first step to replacing the crankcase gasket is placing the tool on a flat surface and taking out the spark plug wire. Disassemble the tool to reach the engine, which is where the crankcase gasket will be found. Take apart the engine to reach the crankcase gasket and any other broken parts. Replacing the gasket will require a socket set, a wrench set, and a pair of pliers.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The crankcase gasket is made for use with lawnmowers, snowblowers, and generators manufactured by Simplicity, MTD, Snapper, Cub Cadet, Toro, and Briggs & Stratton.

This replacement oil drain plug is a genuine OEM part for a lawn tractor or generator engine. The oil drain plug connects to the base of the oil tank and allows the appliance owner to drain used oil and replace it with new, clean oil. The oil drain plug is threaded to screw into the oil tank and prevent it from popping out of place while the appliance is in use. The most likely reason to replace an oil drain plug is if the old plug's threading has become stripped and no longer holds onto the oil tank. Alternatively, the plug is quite small and could easily be misplaced during an oil change. If lost, oil will leak from the engine, causing parts to overheat. Fortunately, replacing a lost or damaged oil drain plug is simple and only requires screwing a new plug into place. This replacement plug is a high-quality part that fits Craftsman and Murray products. It comes sourced from its original manufacturer and ships individually, without any additional hardware.

This is a durable metal valve tappet that is designed for use in small motor lawn equipment. It is attached to the push rod. The valve tappet takes the rotating motion from the camshaft and turns it into a linear motion for the valves to operate correctly. In some cases, the valve tappet can become damaged or break and will need to be replaced.If there is an issue with the valve tappet, a set of pliers will be needed to make the replacement. For safety, use work gloves and make sure the spark plug wire is disconnected before starting the replacement. The crankcase breather, muffler, and other components will need to be taken off to gain access to the valve tappet to replace it.This valve tappet is a genuine OEM replacement component directly sourced from the manufacturer. It is sold as an individual replacement part. It is designed to be used on lawnmowers, snowblowers, tillers, pressure washers, leaf blowers, generators, and chipper shredders manufactured by Briggs & Stratton, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a genuine replacement push rod made for use with several different types of lawn and garden equipment. The push rod is a component that connects to the camshaft. It helps push and keep the exhaust valve open throughout the exhaust stroke. If the push rod is broken or damaged, it needs to be immediately replaced. If it becomes bent, it can create problems with engine performance and even damage other components.The push rod is made of durable metal but can be damaged through ordinary use. A damaged push rod should be replaced immediately. The valve cover will need to be removed before loosening the valve rocker to rotate it away from the other components. Once this is done, the push rod can be removed and the new replacement part installed. Replace all the other parts before using the tool.This push rod is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The push rod is designed for use with wood chippers, generators, snowblowers, and lawnmowers created by Simplicity, Snapper, Cub Cadet, Toro, and Briggs & Stratton.

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.