T36bb810ss/65 Parts

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Lock Clamp is an OEM replacement part for Bosch refrigerators. It is a fitting that secures the freezer drawer in its closed position. Made of durable metal and plastic, the lock-clamp features a latching mechanism to fasten the door shut with an audible click. 

Symptoms of a bad lock clamp include:

• The freezer door not closing or latching securely
• Warm air escaping from around the door seal  
• Noise from a loose or poor-fitting lock-clamp
• The door popping open unexpectedly

Causes of a bad lock clamp can include wear and tear of moving parts over time, broken clips or latches from repeated use.

This OEM Bosch replacement lock clamp is compatible also with Thermador and Gaggenau model refrigerators

The Door Seal is an OEM part for Bosch refrigerators. This part maintains the refrigerator’s internal temperature by creating a tight barrier around the door, preventing cold air from escaping and warm air from entering.

Causes of a bad door seal can include normal wear and tear, damage from frequent opening and closing, exposure to fluctuating temperatures, or buildup of dirt and debris.

Symptoms of a bad Door Seal include:

• Visible cracks, tears, or deformation on the seal
• Condensation or frost buildup inside the refrigerator
• Refrigerator running more frequently
• Warm spots inside the refrigerator

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

A small retaining clip that fastens a component or panel in place inside your appliance. Replacing a broken or missing clip restores a secure fit so parts stay aligned and don't rattle during operation.

• Holds a mating piece, trim, or cover securely in position
• Helps prevent vibration-related looseness, gaps, and rattling
• Restores proper fit when the original clip is cracked, bent, or missing
• Common signs: loose or wobbly part, misalignment, visible damaged/missing clip

• Disconnect power; shut off water or gas supply
• Note the original clip's orientation; take a photo before removal
• Use needle-nose pliers to release/install; avoid prying on brittle plastics
• Press until fully seated and verify secure engagement before reassembly

The Bulb is an OEM part for Bosch ovens. This component provides illumination inside the oven, allowing you to easily monitor the cooking process without opening the door and losing heat.

Causes of a bad bulb can include filament burnout due to extended use, electrical issues that cause power surges, or physical damage from accidental impacts. 

Symptoms of a bad bulb include:

• The oven light not turning on
• Flickering light inside the oven
• Dim or uneven lighting
• The bulb appearing visibly damaged or burnt out

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Mullion Heater is an OEM part for Bosch refrigerators. It is designed to prevent condensation from forming on the refrigerator door mullion, the vertical divider between the doors. This heater ensures that the mullion stays warm enough to stop moisture from condensing and causing potential water damage or mold growth.

Causes of a bad mullion heater can include electrical failures, wear and tear from continuous use, or manufacturing defects.  

Symptoms of a bad mullion heater include:

• Visible condensation or frost on the door mullion
• Water pooling or dripping around the door area
• Increased humidity inside the refrigerator
• Mold or mildew developing near the door seal

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

This perimeter door seal fits into the dishwasher tub channel along the sides and top of the door. It contains wash water and steam to help prevent front leaks and ensure proper door compression.

• Seals the gap between the door and tub on the sides and top
• Helps stop water drips at the front corners and along the door edge
• Reduces escaping steam and moisture at the door area
• Common signs of wear: leaks from the door, visible tears/flattening, musty odor, or the door not sealing smoothly

• Disconnect power and turn off the water supply before servicing
• Open the door, pull the old gasket straight out; clean the channel of debris and residue
• Find the midpoint of the new seal at the top center and press it evenly into the channel down both sides without stretching
• Close the door to help seat the seal, then run a test cycle and check for leaks

The Freezer Clip is an OEM part for Bosch refrigerators. It is designed to secure various components within the freezer compartment, ensuring they remain in place during regular use and while opening and closing the freezer door.

Causes of a bad freezer clip can include wear and tear over time, breakage due to handling or impact, or exposure to extreme temperatures that cause the clip to become brittle and snap. Ensuring the clip is intact and functioning properly is essential for maintaining the organization and efficiency of the freezer space.

Symptoms of a bad freezer clip include:

• Items or shelves in the freezer becoming dislodged
• Difficulty in keeping freezer components in place
• Unusual noises from components moving within the freezer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This sensor monitors operating conditions inside the appliance and reports to the control so cycles run correctly and safely. When the sensor fails, the control may receive inaccurate feedback, leading to irregular performance. What it does:

• Detects key conditions inside the appliance and sends a signal to the control
• Helps the control regulate heat and cycle progress
• Failure symptoms can include erratic cycle times, poor heating performance, or sensor-related error messages
• Can prevent the appliance from starting or completing a cycle if readings are out of range

• 1 sensor

• Disconnect power before servicing; shut off water supply if applicable
• Access the sensor and note wire orientation before removal
• Ensure any sealing surface is clean and the sensor is seated properly; check for leaks after reassembly where applicable
• Run a diagnostic or test cycle after installation to clear errors and verify operation

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This connection piece is the small inline connector that joins internal hoses or water-path components inside your appliance. It restores a secure, sealed fit to help prevent leaks and maintain proper water flow during operation. What it does:

• Creates a tight, sealed connection between hoses or assemblies in the water path
• Helps resolve leaks or drips at a hose joint
• Replaces cracked, warped, or broken connector fittings
• Addresses fill/drain issues caused by a loose or leaking connection

• 1 connection piece

• Disconnect power and shut off the water supply before servicing
• Place a towel or shallow pan to catch residual water
• Note hose routing/orientation and clamp positions before removal
• Push hoses fully onto fittings and secure with clamps; test for leaks after reassembly

The Refrigerator Clip is an OEM part for Bosch refrigerators. It is used to secure various components within the refrigerator, such as shelves, door bins, or other internal parts, ensuring they remain firmly in place during operation. This clip helps maintain the organization and structural integrity of the refrigerator's interior.

Causes of a bad clip can include regular wear and tear, breakage from overloading, or accidental impacts. A compromised clip can result in components being loose or unstable, affecting the usability and efficiency of the refrigerator.

Symptoms of a bad refrigerator clip include:

• Shelves or bins that do not stay in place
•  Loose or wobbly components inside the refrigerator
• Difficulty in securing shelves or other parts
• Visible cracks or breaks in the clip

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This defrost heater melts frost from the evaporator during the automatic defrost cycle to restore airflow and stable temperatures. Replacing a failed heater stops ice buildup on the coils and helps your refrigerator cool reliably. What it does:

• Heats the evaporator coils to clear frost/ice during defrost
• Restores proper airflow for consistent refrigerator and freezer temperatures
• Helps prevent ice forming on the back panel/evaporator cover
• Common symptoms of failure: heavy frost on coils, poor cooling or warming, fan noise from ice contact, recurring frost soon after manual defrost

• 1 defrost heater

• Disconnect power before servicing; wear cut-resistant gloves
• Access is behind the freezer/evaporator cover; remove shelves/drawers and rear panel as needed
• Carefully release the heater from clips/retainers; avoid bending evaporator tubing or damaging fins
• Transfer any clips/insulators from the old part and fully seat connectors; also test the defrost sensor/limit and control

The Water Filter Cap is an OEM part for Bosch refrigerators. This secures the water filter within the refrigerator, ensuring a snug and leak-free fit. 

The need for a replacement can arise if the original cap is lost during a filter change, damaged, or wears out over time. 

Symptoms of a missing or damaged Water Filter Cap include:

• Difficulty in installing or securing the water filter properly, which could lead to water leaks inside the refrigerator.
• Contaminants or particles in the dispensed water, indicating that the filter is not fully sealed and thus not effectively filtering the water.
• The water filter becoming loose or falling out, compromising the refrigerator's ability to provide clean, filtered water.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a replacement micro switch used in select Bosch-built appliances. It opens and closes an electrical circuit when actuated by a lever or cam, enabling functions like starting/stopping a cycle or detecting a position.

• Controls power or signals by opening/closing a low-voltage circuit when pressed
• Commonly used for on/off, door/lid, or position-sensing functions
• Failure may cause the unit not to start, intermittent operation, or features that won't engage
• May also present as unresponsive buttons or functions that only work when pressed a certain way

• Disconnect power before servicing; verify no voltage is present
• Access location varies by model; remove panels as needed to reach the switch
• Note wire positions and terminal orientation before removal
• Test continuity with a meter after installation to ensure proper operation