954/1 Parts

This bearing is a genuine MTD part, sold individually. This bearing can be used as a replacement part in a lawn mower or a tiller. The purpose of the bearing in a lawn mower or a tiller is to facilitate the proper rotation of a component while also eliminating undue friction between the component and its associated parts.The bearing in a lawn mower or a tiller might have to be completely replaced at some point within the standard lifespan of the appliance. This could occur if the bearing is damaged in the form of puncturing, denting, cracking, warping, or eroding. It is a simple replacement process that will require only basic tools to execute.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bearing is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This needle bearing is a genuine OEM replacement part directly sourced from the manufacturer. These bearings are designed for use in tillers, lawnmowers, and other outdoor power equipment with rotating parts. The needle bearings reduce the friction created between those parts. Regular use can cause wear and tear on the bearings. Usually, a squealing or grinding noise will be audible before the part has completely failed. This is a good sign that the needle bearing needs to be replaced. If the bearing completely fails, the parts involved may seize and cause further damage to the equipment or its parts. Routinely lubricating the bearings will help reduce the chances of failure.The needle bearing is used in many applications. On a rototiller, the roller bearing is located on the input shaft. If this roller bearing fails, the input shaft can break and have to be replaced along with the needle bearing. Needle-nose pliers are needed to pull out the damaged bearing. This needle bearing is made of high-quality metal and is sold separately. It is designed to be compatible with tillers and lawn mowers manufactured by Husqvarna, Poulan, Weed Eater, and Craftsman.

This is a thrust washer that can be used as a replacement for the washers in many models of lawn and garden equipment. The thrust washers are flat and are used to ensure that there is no extra space between pieces connected in the machine. The tight fit can help to reduce vibration and prolong the life of the pieces that are being connected. If the washers are missing or have been damaged, it could result in added vibration and sound from the machine.The metal washers tend to be durable. However, they may still need to be replaced. Over time, they could wear down or become corroded. Other times, they might be lost when working on the machine. The replacement is easy.The thrust washer can work in a range of machines including riding mowers, tillers, and tractors from Craftsman and Husqvarna. Each washer is sold individually. Owners might want to have several of these on-hand. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a replacement reduction shaft that is designed for use with select tillers that are used for outdoor gardening and landscaping. The reduction shaft in a tiller is designed to decrease the rotational speed of the unit and attach the upper and lower parts of the tiller. This shaft is subject to constant rotation and excessive vibrations, so it is known to become worn over time. It may also strip at the threads or become otherwise damaged, which would require a replacement. This genuine reduction shaft is manufactured to exact OEM standards by Husqvarna and is compatible with units from the brand, as well as select models from Weed Eater, Poulan, and Jonsered. It is made of durable metal and features two threaded ends. This part is sold as an individual component. Any other parts or hardware will require an additional purchase. It can provide an exact replacement for models that need a new shaft. Owners should always wear gloves for hand protection and work in a well-ventilated area. When repairing the internal parts of a tiller, it will be important to use caution so as not to cause further damage.

The cutting chain on a garden tiller is used as the primary chain to help drive the unit across the soil. Over time, the chain can start to stretch and may not work as well as it did when new. It can also break entirely and require a full replacement with a new cutting chain. Inspecting the chain can give insight into whether it is stretched or has broken and requires a repair or replacement.A screwdriver and a set of wrenches will be needed to replace this part. The process involves removing all of the components out of the chain case. Next, the bolts that hold the case together will need to be taken out. Once the cutting chain is removed from the tiller, the new replacement part can be placed in the same location. After it has been placed, the rest of the parts will need to be reassembled before using the tiller.This cutting chain is compatible with Husqvarna, Poulan, AYP, McCulloch, Poulan Pro, RedMax, Weed Eater, Jonsered, and Craftsman tillers. It comes as an individual OEM replacement part that is sourced directly from the manufacturer.

This replacement part is a tiller chain intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Tiller chains link parts of the machine so that the entire appliance can run smoothly. These chains ensure that the parts in the tiller or cultivator are rotating smoothly.A new tiller chain might be needed if the current one is damaged or broken in any way such as being split or torn. The user might be able to tell when the tiller chain is malfunctioning if there are unusual noises coming from the machine. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This lever lock is a genuine Husqvarna part. It is designed to be a replacement part for several models of tillers. On a tiller, the lever lock is located on the handle assembly. The lever lock holds the handle in place on the frame of the tiller, so it is a very important part.It is not uncommon for the lever lock to become damaged, especially if the handle is jammed and must be forced. If this happens, the lever lock must be replaced before operating the tiller again. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug or power source before attempting to repair it.This lever lock is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Husqvarna, Poulan, Craftsman, and Weed Eater. It also replaces obsolete part number 109228X.

This v-belt is a genuine Husqvarna part, sold individually. This v-belt can be used as a replacement part for a tiller. The purpose of a v-belt is to affix the pulley of the motor to the drive mechanism of the appliance so the wheels are rotated, and the appliance can be operated properly.The v-belt might have to eventually be replaced if it suffers damage that cannot be fixed through a simple repair process. A damaged v-belt should be removed and replaced by this genuine OEM replacement part before using the tiller again. It is a simple replacement process that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This v-belt is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This part is a replacement tine shaft bearing kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current bearings are broken or in any way damaged, this part can be used as a replacement part in tillers.This tine shaft bearing kit helps to support the tine shaft, which is located inside the gear case. Over time and with regular equipment use, bearings can easily become worn down or broken, requiring replacement. Proper tools are required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this tine shaft bearing kit, the appropriate owner's manual and equipment diagrams should be referred to. This tine shaft bearing kit is suitable for use on a variety of tiller models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

This idler pad is made for lawnmowers and other lawn and garden equipment. It's a part of the brake system and ensures that the equipment stops when someone requests it should. While the idler pad is durable, it will need to be replaced when it starts to wear down. Because of this, it's important to check for wear and tear on a regular basis as part of lawnmower maintenance.If there is wear or damage to the idler pad, it will need to be replaced for safety purposes. Make sure the tool is on a stable surface and powered off before starting the replacement. Remove the wheel on the equipment before taking off various parts to reach the brake system where the idler pad is found. A screwdriver and socket set will be needed to complete the process. Remove the old idler pad and replace it with a new one before reassembling the yard tool.This idler pad is compatible with lawn tractors, tillers, and lawnmowers created by Craftsman, Husqvarna, Weed Eater, and Poulan. It is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part.