Bb120tc Parts

This clutch cable kit is an authentic OEM replacement part for a riding lawn mower or tractor. The clutch cable connects to the idler arm located in the lower deck of a mower and allows the operator to manually engage or disengage the blades. The clutch cable runs up through the steering block and into the front display so that the operator can easily access the clutch. If a clutch cable becomes jammed or tenses up, it will be difficult to depress. If the operator tries to depress the clutch cable without realizing that it is jammed, the clutch cable will snap. The most obvious sign of a snapped clutch cable is that the clutch gives little resistance and the blade cannot be engaged. To change a clutch cable, use a socket set to remove the fuel tank and gain access to the cable. A pair of needle nose pliers is also recommended. This replacement part is compatible with Weed Eater, Husqvarna, Ryobi, and Poulan appliances and comes sourced from its original manufacturer. This part includes a clutch cable and a zip tie.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This is a starter solenoid used in a variety of riding lawn mowers and yard tractors. Unlike most push mowers that are started by pulling a rope and firing a magneto, riding mowers have starters and batteries. The solenoid is the link between the battery and starter. When the ignition key is turned, electricity from the starter flows through the solenoid to the mower's ignition, firing the engine. Because it is the part subjected to abrupt electrical charges, over time the solenoid's internal workings may fail and the device must be replaced. A symptom of a bad solenoid is the if the engine fails to turn over. To make sure the problem is not the battery, turn the ignition switch on and use a screwdriver to simultaneously touch both terminals of the solenoid. If the engine turns over, the solenoid must be replaced. The solenoid sits inside the engine housing by the starter motor. Before starting to replace it, disconnect the positive battery cable. Replacing this device is as simple as disconnecting the wires that attach it to the battery and unbolting it from the engine housing. This solenoid is a genuine OEM replacement part that is manufactured to be an exact replacement for the original part. This solenoid is compatible with Poulan, Husqvarna, Craftsman, and Weed Eater equipment.

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

This part is a switch in the control system of a lawn tractor or lawnmower that activates the central electrical systems. Known as a starter switch, it is responsible for turning the power on for the mower. If the engine will not start and the electric starter does not engage, the ignition switch may be defective and needs to be replaced. To check an ignition switch, use an ohmmeter to determine if there is any connection between the S and B terminals. If no connection is detected, the ignition switch is the problem. Replacing an old or malfunctioning ignition switch on a riding mower is quick and easy. First, disconnect the battery and remove the bolt connecting it to the negative cable. Remove the ignition switch and disconnect the wire harness attached to the back. Install the new ignition switch, connect the wire harness, and then reconnect the battery. This part is compatible with specific products from popular brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. It is a genuine OEM part sourced directly from the manufacturer and is sold individually.

This replacement extension spring is a vital part of the lawn tractor's blade system that helps to activate the blade break. This is useful when the operator wants to continue driving their lawn tractor but doesn't need the blade to continue rotating. Many lawn tractors include this as a safety precaution and require the operator to break the blade before they can drive in reverse. Extension springs are built to last a long time and very rarely break, but the coils may begin to separate from prolonged use. When this happens, the spring will no longer work as well and the operator will feel it start to give. Replacing the extension spring is fairly straightforward but will require you to remove the lower deck. Using a wrench to remove the spring can help but may not be necessary. This OEM extension spring is a high-quality replacement part sourced from its original manufacturer and is compatible with Ryobi, Jonsered, Husqvarna, Poulan, and Weed Eater lawn tractors. It ships individually.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

This headlight switch is a genuine Husqvarna part, sold individually. This headlight switch can be used as a replacement part in a lawnmower. The purpose of the headlight switch in a lawnmower is to provide the operator with a source of illumination in order to operate the appliance at any point during the night or during a period of sustained darkness.The headlight switch in a lawnmower might have to be completely replaced if it can no longer trigger the turning on of the headlights of the appliance when the operator desires to use the appliance in darkness. The headlight switch could suffer damage due to exposure to inclement weather, general wear and tear over long-term use, or an accidental collision with a hard object.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This headlight switch is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Ariens, Poulan, Murray, and Dixon.

This replacement deflector shield is a genuine OEM part intended for use on lawn mowers and tractors. It attaches to the side of the mower and directs grass clippings away from the blade as it mows. This serves to keep grass from bunching up in the blade, which could cause it to stall out. The direction of the deflector shield also blows grass clippings behind the mower to keep any potentially hazardous debris from flying up at the mower. Deflector shields can become dried out and brittle over time and can snap off if the mower drives too close to a wall, tree, or other hard object. Deflector shields usually only need replacing if they break. This would cause grass clippings and debris to fly in all directions, which could be dangerous for the user. Replacing the deflector shield is an easy repair and only requires a socket wrench set. This part is compatible with a wide variety of Husqvarna and Craftsman lawn mowers and tractors and is sourced from the original manufacturer. This product ships individually.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

This is a rear tire for a lawn mower or lawn tractor. Tires are critical to the smooth, comfortable operation of a lawn mower, and their lifespan depends on how they are used. Lawn mower tires that are used more frequently, or on rougher terrain, will typically have a shorter lifespan. Lawn mower tires may lose traction over time with repeated use. They may also weaken and be unable to hold air pressure for long periods of time. Occasionally, a lawn mower tire may become punctured or damaged. Lawn mower tires may also degrade through exposure to extreme weather conditions, such as heat, rain, wind, and cold. A visual inspection can help determine whether it is time to replace the tire. Depending on the condition of the tires, it might be necessary to replace both rear tires at once. This can ensure a smooth, even mowing experience, and prevent additional damage to the mower. This lawn mower tire is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers and lawn tractors made by Jonsered, Poulan, Ariens, Husqvarna, Craftsman, Rally, Yard Pro, Murray, Ryobi, Weed Eater, Western Auto, Companion, and Southern States.

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.