Bosch Dryer Parts

This cover closes a designated opening on the appliance, shielding internal components and preserving proper operation. Replace a cracked, warped, or missing cover to restore a secure fit and protect the mechanism beneath.

• Shields internal components from dust, debris, and accidental contact
• Provides a finished closure to help maintain the appliance's intended containment/airflow
• Keeps underlying parts properly seated and protected during operation
• Symptoms indicating replacement: cracked or missing cover, broken tabs, loose fit, rattling/vibration, exposed components

• Disconnect power; turn off the water supply before servicing
• Keep track of orientation and retain original screws/clips for reinstallation
• Align and seat the cover fully; engage tabs and tighten fasteners snugly without overtightening
• Restore power and run a brief check to ensure secure fit and quiet operation

The Latch is an OEM part for Bosch dryers. This latch ensures that the dryer door remains securely closed during operation, preventing the door from opening unexpectedly and allowing the dryer to function efficiently.

Causes of a bad dryer latch can include wear and tear from frequent use, physical damage from forceful closing or impacts, and deformation due to prolonged exposure to high temperatures.

Symptoms of a bad latch include:

• The dryer door not staying closed
• The dryer not starting or stopping mid-cycle
• Difficulty in opening or closing the dryer door
• The door popping open during operation

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Thermister

The Foot is an OEM component specifically designed for select Bosch dryers. It securely elevates the appliance above the floor for ventilation purposes. Rigid plastic construction supports weight distribution evenly during cycles.

Causes of a bad foot can involve normal wear from long-term appliance positioning. Exposure to moisture or impacts posing cracking and weakening risks over time necessitate replacement.

Causes of a bad foot include:

• Dryer is unstable and rocks or sways more than usual
• Scratches or damage to flooring surfaces it contacts
• Uneven drying performance from improper elevation

Symptoms of a bad foot include collapsed or unstable base structure inhibiting dependable operation. Timely replacement ensures correct height positioning.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dryers. Replace to properly elevate your unit and maximize airflow circulation.
 

Color: white. Measures about 10-1/2 inches wide by 13-1/2 inches deep.

The Blower Belt is an OEM part for Bosch dryers. This belt efficiently transmits rotation from the motor to the blower fan, circulating heated air through the dryer drum.

Causes of a bad blower belt can include drying and cracking from heat exposure over many cycles.

Symptoms of a bad blower belt include:

• The blower fan not spinning or rotating slower than usual
• Longer dry times or an inability to fully dry clothes
• An intermittent squealing or squeaking noise from the belt

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replace a worn or missing control button with this push button cap. It fits over the control panel's switch actuator to restore a clean look and reliable button feel when selecting settings.

• Provides the surface you press to actuate the underlying control switch
• Helps align and protect the switch from dust and everyday wear
• Restores proper button travel and tactile feedback
• Common symptoms: missing or cracked cap, button feels loose or wobbly, sticks or doesn't respond consistently

• Disconnect power to the appliance before servicing
• Gently pry off the old cap from the front without marring the panel
• Align the new cap with the switch stem/actuator and press until fully seated
• Test button movement and operation before completing reassembly

This Vent Adapter is an OEM part for Bosch Dryers. It plays a role in connecting the dryer exhaust to the vent hose, ensuring efficient airflow and proper ventilation. Over time, wear and tear or improper installation can lead to issues with this component.

What Causes a Bad Vent Adapter: 
Continuous use or improper fitting can cause the vent adapter to degrade or become loose. Exposure to heat and moisture from the dryer can also contribute to its deterioration.

Symptoms of a Bad Vent Adapter:

• Poor dryer performance
• Difficulty in connecting the vent hose
• Air leaks around the vent connection

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement drum belt wraps around the dryer drum and motor pulley to rotate the drum for normal drying. Replaces worn or broken belts to restore tumbling and help your dryer move loads evenly. What it does:

• Transfers motor power to the drum so clothing tumbles during the drying cycle
• Commonly used when the drum slips, won't turn, or makes a rubbing/squealing noise
• Helps maintain proper drum alignment and smooth rotation when in good condition

• Disconnect power before any service; follow the dryer's service manual for safe access
• Inspect idler pulley and motor shaft for wear when replacing the belt
• Re-tension and route the belt per the OEM diagram to avoid mis-tracking

A 15 amp cartridge fuse that protects appliance electrical circuits from overcurrent, helping prevent damage to controls and components. Fits into inline fuse holders or boards where that specific fuse rating is required. What it does

• Interrupts circuit power when current exceeds 15 amps to protect wiring and electronics
• Commonly linked to symptoms like no power to controls, unresponsive display, or appliances that won't start
• Designed to be replaced when visibly blown or when continuity test fails
• Works as the exact rated safety fuse specified for compatible appliances

• One 15 amp cartridge fuse

• Disconnect all power to the appliance before accessing or replacing the fuse
• Replace with the identical fuse type and 15 amp rating only; do not substitute different ratings
• Handle carefully and mount fully seated in its holder or on the PCB as designed
• If the new fuse fails again immediately, stop — repeated failures indicate underlying electrical faults

This blower assembly circulates air through the appliance to support proper airflow and drying performance. Replacing a worn or damaged blower restores airflow and helps the unit heat and dry efficiently. What it does:

• Moves air through the appliance to support heating and drying cycles.
• Restores proper airflow when the original blower is cracked, blocked, or worn.
• Helps prevent long dry times and overheating caused by restricted airflow.
• Reduces unusual rattling or grinding noises coming from the lower cabinet.

• Disconnect power before servicing to avoid electric shock.
• Access may require removing lower front or kick panels.
• Note blower orientation and duct seals during removal to ensure proper reinstallation.
• If noise or airflow issues persist after replacement, inspect the vent duct and motor bearings.

This hinge is the OEM-style replacement that lets an appliance door pivot smoothly and stay aligned, restoring proper opening, closing, and sealing. Ideal when worn or damaged hardware causes misalignment. What it does:

• Supports and guides the appliance door so it opens and closes on its pivot
• Helps maintain door alignment and proper sealing to prevent gaps
• Commonly replaces worn, bent, or broken hinges causing sagging or rubbing
• Addresses symptoms like a drooping door, noisy movement, or uneven closure

• One hinge

• Disconnect power and empty the door before starting; support the door to prevent dropping
• Retain all screws and mounting hardware; compare new hinge to old for orientation
• Use basic hand tools; avoid overtightening fasteners to prevent damage
• Consider replacing matched hinges for even alignment