Dd112502p Parts

This cutlery basket kit (also called a silverware basket) organizes and separates utensils in your dishwasher for thorough cleaning. It replaces a damaged or missing basket and includes insert grids to help prevent nesting and small items shifting around. What it does:

• Holds and organizes flatware and small utensils during wash cycles
• Insert grid(s) keep pieces separated to improve spray reach and cleaning consistency
• Helps contain small items and avoid interference with spray arms
• Common signs of wear: cracked or warped basket, missing inserts, utensils tipping over, declining results from nesting

• Includes 1 cutlery basket and insert grid(s) as supplied by the manufacturer

• Open dishwasher and pull out the rack or drawer
• Remove the old basket and clear any debris from the area
• Place the new basket in the designated position so it sits level and secure
• Fit the insert(s); verify spray arms rotate freely before running a cycle

Replacement lid actuator kit that restores lid engagement and movement for affected Fisher & Paykel washers. Includes two actuators so you can replace worn or broken units and help return proper lid latch and cycle operation. What it does:

• Replaces the small actuator that engages the lid latch/lock assembly to allow proper lid movement and secure closing.
• Helps address symptoms such as lids that fail to latch, intermittent lid locking, or cycles that won't start due to improper lid engagement.
• Restores mechanical action; works as a direct replacement where this actuator design is specified.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Use basic hand tools; handle plastic tabs and mounting points carefully to avoid breakage.
• Follow for access, alignment, and proper fastening; test lid operation before final reassembly.

This Latch Assembly is an OEM part for Fisher & Paykel dishwashers. It is an essential component that ensures the secure closure of the dishwasher door, maintaining the appliance's safety and efficiency during operation. Specifically designed for Fisher & Paykel dishwashers, this latch assembly guarantees a perfect fit and smooth functionality.

The latch assembly can become problematic due to regular wear, mechanical damage, or misalignment. A malfunctioning latch can prevent the dishwasher from operating correctly, as a secure door seal is crucial for the appliance's performance.

Symptoms of a failing latch assembly include:

• Difficulty in closing or opening the dishwasher door.
• The dishwasher door unexpectedly popping open during cycles.
• The dishwasher failing to start, indicating the door is not securely latched.
• Visible wear or damage to the latch mechanism.
• Leaks around the door, suggesting an improper seal.
• This OEM Fisher & Paykel part is also compatible with Bertazzoni, Dacor, and Viking brands.

Double inlet valve assembly that controls incoming water flow to the appliance's fill system. Replacing this assembly restores proper filling and shutoff to resolve slow fills, no-fill conditions, or continuous/refilling problems. What it does:

• Directs and regulates water entering the appliance during fill cycles.
• Opens to allow water in when the control calls for a fill and closes to stop flow.
• Commonly replaced when the appliance fails to fill, fills slowly, or keeps running water.
• Can prevent overfilling or leakage caused by a valve that sticks open.

• Turn off power and shut off the water supply before beginning any work.
• Disconnect water lines and electrical connectors carefully; label wires if needed for reassembly.
• Inspect hoses and fittings for damage; replace any corroded or cracked components.
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks.

This joiner drain hose connects two drain lines or links a drain outlet to the household drain, restoring a sealed path for wastewater. It's used where a double or joined drain connection is required to prevent leaks and ensure proper draining. What it does

• Joins two drain hoses or connects a drain outlet to the household drain to create a continuous, leak-resistant path
• Helps prevent wastewater spills or backflow at a hose connection point
• Used when replacing a damaged or worn joining hose section or converting a single-hose run to a double/run-through configuration
• Compatible with compatible washer/dishwasher drain plumbing that accepts this joiner style

• One joiner drain hose

• Turn off and unplug the appliance and shut off water supply before servicing
• Confirm hose ends, diameter, and orientation match the appliance and home drain fittings before installation
• Use appropriate clamps or fasteners; ensure all connections are secure to avoid leaks

Left side

The Door Latch is an OEM part for Fisher & Paykel dishwashers. This latch securely fastens the left side of the dishwasher door closed during wash cycles.

Causes of a bad door latch can include wear and tear over time, impact damage, or issues with the latch mechanism itself.

Symptoms of a bad left door latch include:

• The door not closing tightly or securely
• Gaps appearing along the door seam
• Water leakage during wash cycles
• Difficulty fully closing or opening the door

A replacement inlet valve kit that controls incoming water flow to the appliance, restoring proper fill and water delivery. Designed as a direct-fit service part to address water supply and filling issues quickly and safely. What it does:

• Regulates water entering the unit so cycles can fill to the correct level.
• Stops or starts water flow when cycles call for fill.
• Commonly used when the appliance won't fill, fills slowly, or overfills.
• Can replace valves that leak or fail to shut off fully, causing intermittent water flow.

• Disconnect power and shut off the water supply before servicing.
• Use basic hand tools; avoid force and follow OEM torque guidance.
• After installation, restore water and power and check for proper fill and any leaks.

This drain filter assembly captures food and debris from the dishwasher sump to help prevent clogs and protect the pump. Replaces a worn or damaged sump filter to restore proper draining and reduce leftover particles on dishes. What it does

• Screens out food scraps and larger debris before water reaches the drain pump.
• Helps prevent pump blockages that can cause poor draining or standing water.
• Can reduce odors caused by trapped food in the sump area.
• Useful when the existing filter is cracked, broken, or missing pieces.

• One drain filter assembly

• Disconnect power and water supply before beginning any service.
• Remove lower rack and access the sump area; confirm seating and orientation before final reassembly.
• Inspect surrounding seals and the pump inlet; clear any additional debris.
• Run a short drain/rinse cycle after installation to confirm proper fit and function.

Note: Drain Hose Extension Kit will extend the drain hoses by 11’ 10”.

This hose inlet (Wirsbo) provides the water connection interface for the appliance, restoring a secure feed from your home supply. It's a direct plumbing inlet piece designed for reliable water delivery. What it does:

• Reconnects the incoming water line to the appliance inlet
• Provides a leak-resistant interface when installed with proper seals
• Useful when original inlet is cracked, corroded, or leaking
• Helps stop intermittent filling problems caused by damaged inlet fittings

• Turn off the water supply and unplug the appliance before starting work
• Inspect and replace any worn gaskets or O-rings; use manufacturer-approved seals
• Tighten fittings to manufacturer torque guidance; avoid overtightening plastic threads

The Tub Release Kit is an OEM replacement part for Fisher & Paykel dishwashers. It contains the tub release latch mechanism responsible for securely locking the dishwasher tub in place during wash cycles. 

Symptoms of a faulty tub release kit include:

• The tub not latching into position properly or staying locked in place  
• Leaks around the tub door seal 
• The tub releasing unexpectedly during operation

Causes of a failed tub release kit include worn or damaged latch components from heavy use over the years. Mineral deposits can leave latches difficult to engage. 

The Kit Seal Wash 605 is an OEM part for Fisher & Paykel dishwashers. It is a multi-piece sealing kit that includes gaskets, o-rings, tub seals and drainage components. These seals work together to prevent water leaks, ensuring cycles finish efficiently. 

Symptoms of a leaking or faulty seal kit are:

• Puddles or standing water inside or underneath the dishwasher  
• Extended or incomplete drying even when water has fully drained
• Water marks or residue left behind on dishes after washing

Causes of a failed seal kit include normal deterioration of rubber and plastic materials over extended use. Mineral deposits can harden seals, compromising flex. 

This Lid Assembly is an OEM part for Fisher & Paykel dishwashers. This lid assembly plays a vital role in the dishwasher's operation by sealing the washing compartment during cycles, ensuring water and detergent are contained effectively for optimal cleaning.

Wear and tear, mechanical issues, or alignment problems can lead to the malfunctioning of the lid assembly. A compromised lid assembly can affect the dishwasher's ability to wash dishes effectively and may lead to water leakage.

Symptoms of a failing lid assembly include:

• Water leaks from the dishwasher, particularly during cycles.
• The dishwasher not completing cycles properly or stopping mid-cycle.
• Noticeable issues with the cleanliness of dishes post-wash, pointing to ineffective sealing.
• Unusual noises during operation, potentially indicating misalignment.
• Difficulty in closing the dishwasher door, or the lid not fitting properly.

This OEM Fisher & Paykel part is also compatible with Bertazzoni, Dacor, and Viking brands. 
 

The Rinse Aid Dispenser Cap is an OEM part for Fisher & Paykel dishwashers. It fits on top of the rinse aid dispenser compartment located inside the dishwasher. The cap plays an important role in regulating the flow of rinse aid during cycles to ensure glasses and dishes dry spot-free.

Causes of a bad cap can be normal wear and tear over time, cracks or breakage, or issues with the dispenser mechanism it interacts with.

Symptoms of a bad rinse dispenser cap include:

• Insufficient or improper dispensing of rinse aid during cycles
• Water spots or film left on dishes after washing
• Difficulty filling or refilling the rinse aid reservoir

This lock nut filter plate secures and supports the dryer's lint filter assembly, keeping the filter seated and helping maintain proper airflow. It replaces a worn or damaged plate to restore a secure filter fit and reduce lint bypass. What it does:

• Holds the lint filter securely in the filter housing to prevent movement during dryer operation
• Helps maintain correct airflow by keeping the filter properly seated
• Prevents gaps that can allow lint to bypass the filter and collect in the housing
• Commonly replaced when bent, cracked, or when the filter no longer seats properly

• One lock nut filter plate

• Refer to your model's service manual or parts diagram for correct placement and orientation
• Disconnect power to the appliance before attempting any repair
• Handle sharp edges carefully and use appropriate tools to remove/install retaining hardware
• If other filter or housing components are damaged, replace them as needed for a proper repair

This spray arm assembly replaces a damaged or clogged lower spray arm to restore proper water distribution for better dishwasher cleaning coverage. Durable rotor-style arm directs wash water to rinse dishes and cookware. What it does:

• Spins to distribute pressurized wash water across the lower rack for effective cleaning
• Helps prevent poor cleaning or food residue remaining on dishes when functioning correctly
• Replaces cracked, warped, or heavily clogged spray arms that impede water flow
• Works with the dishwasher's pump and sump to maintain designed spray patterns

• Disconnect power and water supply before beginning any repair
• Remove lower rack and gently unclip or unscrew the old spray arm; inspect retaining nut or hub for wear
• Ensure any related seals, gaskets, or mounting hardware are properly seated during reassembly