Dd24dctx9 Parts

The Dishrack Tine Insert is an OEM part for Fisher & Paykel dishwashers. Located within the bottom dishrack, the tine insert is designed to securely hold taller items in place during the wash cycle.

Causes for replacement can be bent, broken, or missing tines that no longer grip dishes properly. Over time, hard water deposits may also weaken inserts.

Symptoms of a bad tine insert include:

• Items shifting or falling over during the wash
• Scratches or damage to dishes from tumbling
• Difficulty loading or unloading taller items

This motor rotor assembly is the magnetic rotor used in SmartDrive-style direct-drive top-load washers. It works with the stator to turn the wash basket for wash and spin. Replacing a worn rotor restores smooth, reliable motor performance.

• Provides the rotating component of the direct-drive motor; interacts with the stator to drive agitation and spin
• Common symptoms of failure: no spin or agitation, humming with little movement, loud knocking/grinding from the base, or cycles stopping with a motor fault
• Visible cracks in the magnet ring or stripped internal splines indicate the rotor should be replaced
• Restores proper torque transfer and reduces vibration/noise when the original rotor is worn or damaged

• Disconnect power and water; tilt the washer back to access the underside
• Remove the bottom cover, hold the tub, remove the center bolt, and pull the rotor straight off the shaft
• Strong magnets—keep fingers and tools clear; inspect/clean the shaft and splines before installing the new rotor
• Align the rotor on the splines, reinstall and tighten the center bolt per service guidance, refit the cover, and run a test cycle

This cutlery basket kit (also called a silverware basket) organizes and separates utensils in your dishwasher for thorough cleaning. It replaces a damaged or missing basket and includes insert grids to help prevent nesting and small items shifting around. What it does:

• Holds and organizes flatware and small utensils during wash cycles
• Insert grid(s) keep pieces separated to improve spray reach and cleaning consistency
• Helps contain small items and avoid interference with spray arms
• Common signs of wear: cracked or warped basket, missing inserts, utensils tipping over, declining results from nesting

• Includes 1 cutlery basket and insert grid(s) as supplied by the manufacturer

• Open dishwasher and pull out the rack or drawer
• Remove the old basket and clear any debris from the area
• Place the new basket in the designated position so it sits level and secure
• Fit the insert(s); verify spray arms rotate freely before running a cycle

Replacement lid actuator kit that restores lid engagement and movement for affected Fisher & Paykel washers. Includes two actuators so you can replace worn or broken units and help return proper lid latch and cycle operation. What it does:

• Replaces the small actuator that engages the lid latch/lock assembly to allow proper lid movement and secure closing.
• Helps address symptoms such as lids that fail to latch, intermittent lid locking, or cycles that won't start due to improper lid engagement.
• Restores mechanical action; works as a direct replacement where this actuator design is specified.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Use basic hand tools; handle plastic tabs and mounting points carefully to avoid breakage.
• Follow for access, alignment, and proper fastening; test lid operation before final reassembly.

This Latch Assembly is an OEM part for Fisher & Paykel dishwashers. It is an essential component that ensures the secure closure of the dishwasher door, maintaining the appliance's safety and efficiency during operation. Specifically designed for Fisher & Paykel dishwashers, this latch assembly guarantees a perfect fit and smooth functionality.

The latch assembly can become problematic due to regular wear, mechanical damage, or misalignment. A malfunctioning latch can prevent the dishwasher from operating correctly, as a secure door seal is crucial for the appliance's performance.

Symptoms of a failing latch assembly include:

• Difficulty in closing or opening the dishwasher door.
• The dishwasher door unexpectedly popping open during cycles.
• The dishwasher failing to start, indicating the door is not securely latched.
• Visible wear or damage to the latch mechanism.
• Leaks around the door, suggesting an improper seal.
• This OEM Fisher & Paykel part is also compatible with Bertazzoni, Dacor, and Viking brands.

Left side

The Door Latch is an OEM part for Fisher & Paykel dishwashers. This latch securely fastens the left side of the dishwasher door closed during wash cycles.

Causes of a bad door latch can include wear and tear over time, impact damage, or issues with the latch mechanism itself.

Symptoms of a bad left door latch include:

• The door not closing tightly or securely
• Gaps appearing along the door seam
• Water leakage during wash cycles
• Difficulty fully closing or opening the door

Double inlet valve assembly that controls incoming water flow to the appliance's fill system. Replacing this assembly restores proper filling and shutoff to resolve slow fills, no-fill conditions, or continuous/refilling problems. What it does:

• Directs and regulates water entering the appliance during fill cycles.
• Opens to allow water in when the control calls for a fill and closes to stop flow.
• Commonly replaced when the appliance fails to fill, fills slowly, or keeps running water.
• Can prevent overfilling or leakage caused by a valve that sticks open.

• Turn off power and shut off the water supply before beginning any work.
• Disconnect water lines and electrical connectors carefully; label wires if needed for reassembly.
• Inspect hoses and fittings for damage; replace any corroded or cracked components.
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks.

This joiner drain hose connects two drain lines or links a drain outlet to the household drain, restoring a sealed path for wastewater. It's used where a double or joined drain connection is required to prevent leaks and ensure proper draining. What it does

• Joins two drain hoses or connects a drain outlet to the household drain to create a continuous, leak-resistant path
• Helps prevent wastewater spills or backflow at a hose connection point
• Used when replacing a damaged or worn joining hose section or converting a single-hose run to a double/run-through configuration
• Compatible with compatible washer/dishwasher drain plumbing that accepts this joiner style

• One joiner drain hose

• Turn off and unplug the appliance and shut off water supply before servicing
• Confirm hose ends, diameter, and orientation match the appliance and home drain fittings before installation
• Use appropriate clamps or fasteners; ensure all connections are secure to avoid leaks

This drain filter assembly captures food and debris from the dishwasher sump to help prevent clogs and protect the pump. Replaces a worn or damaged sump filter to restore proper draining and reduce leftover particles on dishes. What it does

• Screens out food scraps and larger debris before water reaches the drain pump.
• Helps prevent pump blockages that can cause poor draining or standing water.
• Can reduce odors caused by trapped food in the sump area.
• Useful when the existing filter is cracked, broken, or missing pieces.

• One drain filter assembly

• Disconnect power and water supply before beginning any service.
• Remove lower rack and access the sump area; confirm seating and orientation before final reassembly.
• Inspect surrounding seals and the pump inlet; clear any additional debris.
• Run a short drain/rinse cycle after installation to confirm proper fit and function.

This Crockery Insert is an OEM part specifically designed to seamlessly integrate with Fisher & Paykel dishwasher models. Crafted to accommodate various types of dishes, this insert optimizes space utilization within the dishwasher, ensuring efficient and thorough cleaning of crockery during wash cycles.

Issues may arise with this part due to prolonged usage, resulting in cracks, wear, or discoloration. Additionally, the accumulation of food particles or debris within the insert might hinder its effectiveness in securing dishes properly during the wash cycle.

Symptoms indicating a defective Crockery Insert include:

• Insecure or uneven placement of crockery during washing
• Visible cracks or damage on the insert
• Incomplete cleaning of dishes or utensils
• Unusual noises during the wash cycle, suggest loose components

This lid assembly replaces a damaged or worn top lid to restore proper coverage and safe access to the appliance interior. It provides a finished surface and supports proper opening and closing of the appliance top. What it does

• Covers and protects the appliance interior from debris and moisture.
• Restores secure opening and closing action when the original lid is cracked, warped, or broken.
• Helps maintain proper alignment and fit of the top panel.
• Improves appearance when the original lid is scratched or cosmetically damaged.

• Disconnect power (and water if applicable) before starting any repair.
• Handle edges and any glass or painted surfaces carefully to avoid damage or injury.
• Replacement typically requires removing fasteners and aligning the lid to its hinge or mounting points—retain original hardware.

The Control Module is an OEM part for Fisher & Paykel dishwashers. It is a key electronic component responsible for operating and controlling the various functions and cycles of the dishwasher.

Causes of a bad control module can include damage due to power surge or fluctuation, faulty wiring connections, or general component failure over time.

Symptoms of a bad control module include:

• The dishwasher not turning on at all
• Blinking or unresponsive display
• Inability to select wash cycles
• Improper functioning of wash arms, spray jets, or other moving parts

The Small Plate Crockery Insert is an OEM part for Fisher & Paykel dishwashers. The insert fits into the dishwasher rack, providing a stable environment for smaller items that might otherwise be displaced by the force of water jets.

Causes of a bad small plate crockery insert can include physical damage such as cracks or breakage, wear and tear from frequent use, or warping due to exposure to high temperatures. 

Symptoms of a bad small plate crockery insert include:

• Plates moving or tipping over during the cycle
• Inadequate cleaning of small plates
• Increased noise from items rattling during operation

This OEM part is designed to fit perfectly with your Fisher & Paykel dishwasher model, ensuring optimal performance and longevity.

Note: Drain Hose Extension Kit will extend the drain hoses by 11’ 10”.

This hose inlet (Wirsbo) provides the water connection interface for the appliance, restoring a secure feed from your home supply. It's a direct plumbing inlet piece designed for reliable water delivery. What it does:

• Reconnects the incoming water line to the appliance inlet
• Provides a leak-resistant interface when installed with proper seals
• Useful when original inlet is cracked, corroded, or leaking
• Helps stop intermittent filling problems caused by damaged inlet fittings

• Turn off the water supply and unplug the appliance before starting work
• Inspect and replace any worn gaskets or O-rings; use manufacturer-approved seals
• Tighten fittings to manufacturer torque guidance; avoid overtightening plastic threads

This genuine drain hose kit replaces the faulty or damaged drain plumbing for a DishDrawer dishwasher, restoring proper water removal and preventing leaks. Fits the DishDrawer drain connection and helps clear standing water. What it does:

• Provides a replacement drain hose to route wastewater from the DishDrawer to the household drain.
• Restores normal draining when the original hose is cracked, split, clogged, or leaking.
• Helps prevent leaks and standing water in the drawer that can cause odors or poor wash performance.
• Compatible with the DishDrawer drain assembly and connects to the existing drain outlet.

• One DishDrawer drain hose kit (hose and any factory-supplied fittings as shipped)

• Disconnect power to the appliance and turn off the water supply before starting work.
• Remove the drawer per your model's service instructions to access the drain hose; disconnect and remove the old hose carefully.
• Route the new hose without sharp bends or kinks and secure all clamps/fittings to prevent leaks.
• Test for leaks and proper drain operation after reinstalling the drawer and restoring power/water.