Ddg5888malwh Parts

Best Seller

Genuine Ge part

Rear Drum Bearing Kit

By: Ge

Part Number: WE25M40

The Rear Drum Bearing Kit is an OEM replacement part for GE dryers. It is a comprehensive kit that includes both rear drum bearings and necessary mounting hardware. These bearings play a vital role in smoothly rotating the dryer drum during cycles, reducing vibrations and noise.

Symptoms of bad bearings include:

Excessive shaking or vibrating during cycles
Loud grinding or scraping noises emanating from the rear drum area
Difficulty turning or rotating the dryer drum by hand
Increased wear and early failure of other components

Causes of bad bearings can include normal wear and tear over time, exposure to excessive loads or unbalanced loads that strained the bearings, or damage from extended use without proper lubrication.

This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Very loud squeal noise Thomas P. • Dundalk , MD • June 05, 2018

Repair went well, replaced the pulley wheel, belt, rear drum bearing. Had an issue after replacement with the dryer stopping after ~5mins or so when running with heat. Fluff cycle would run fine. Details: The lock nut on the pulley wheel didn't feel tight enough so i tried to crimp it back on the pulley arm. It then became way too lose. I had to replace it with a plastic washer I had in my toolkit. That fit snug and seems to work fine. I also added some grease to the pulley shaft under... Read more

$73.95

Compare At:: $88.74
You Save:: $14.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Idler Pulley

4.8 (135)

By: Ge

Part Number: WE12X83

The Idler Pulley is an OEM part for GE dryers. This critical component helps to maintain the correct tension on the dryer's drive belt, ensuring smooth operation and preventing it from slipping.

Symptoms of a bad Idler Pulley include:

Squeaking or screeching noises during dryer operation, often a sign of bearing wear or failure.
The dryer drum not turning smoothly, or at all, indicating that the belt may be slipping or has come off entirely due to a failed pulley.
Excessive heat or a burning smell, which can occur if the pulley is seizing up and causing friction.
Visible wear or damage to the pulley itself.

Causes of a bad idler pulley can include worn bearings, accumulation of lint and debris that impedes rotation, or material fatigue after prolonged use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You Very loud squeal noise Thomas P. • Dundalk , MD • June 05, 2018

$16.68

Compare At:: $30.92
You Save:: $14.24

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Drive Belt

4.9 (257)

By: Ge

Part Number: WE12X10014

The Dryer Drive Belt is an OEM part for GE dryers that connects the motor to the drum, allowing the drum to rotate during the drying cycle. The belt measures approximately 87 inches long and 0.25 inches wide, with 4 ribs.

Over time, the Dryer Drive Belt can wear out or break, leading to the drum not turning.

Symptoms of a bad Dryer Drive Belt include:

The drum not spinning or rotating
A squealing or thumping noise coming from the dryer
The dryer stopping unexpectedly during a cycle

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Will not tumble
Won't start
Noisy

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ... Read more

$15.38

Compare At:: $27.08
You Save:: $11.70

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dual Coil

4.8 (36)

By: Ge

Part Number: WE4X692

The Dual Coil is an OEM part for GE dryers. This is often referred to as the “M” coil. If you need to replace both the main coil and dual coil, it is recommended to order the kit 279834, which includes both coils for a comprehensive replacement.

Causes of a faulty dual coil can include wear and tear over time, electrical component failure, or damage due to overheating or excessive usage. These factors can result in insufficient heat production, inconsistent drying, or no heat at all.

Symptoms of a bad dual coil may include:

Insufficient heat or no heat during the drying cycle
Inconsistent drying results
Extended drying times

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Gas dryer would run but no heat Roger M. • Fabius , NY • September 03, 2016

I checked out a few youtube videos on trouble shooting a gas dryer that would not heat, like this one https://www.youtube.com/watch?v=Q8j6fQM3P34. Eliminated all the sensors as possible problems, leaving only the coils or more advanced problems. Took the chance it was one of the coils. I ordered both, replaced them both, put the dryer back together and fortunately that was the problem and it lit up and is running as good as new. Read more

$33.95

Compare At:: $40.06
You Save:: $6.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Door Latch

5.0 (28)

By: Ge

Part Number: WE1M1011

The Door Latch is an OEM part for GE dryers. This part ensures the dryer door stays securely closed during operation, activating the safety switch to allow the dryer to operate. The latch mechanism engages with the door strike to lock the door, preventing it from opening while the dryer is running, which is essential for both safety and proper functioning of the appliance.

Causes for replacement can include normal wear and tear, accidental damage, or a misalignment that prevents the door from securely latching.

Symptoms of a bad Door Latch include:

The dryer door doesn't stay closed during cycles.
Difficulty in starting the dryer due to the door not activating the safety switch.
Visible wear or damage to the latch mechanism.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Main Coil

4.8 (33)

By: Ge

Part Number: WE4X693

The Main Coil is an OEM part for GE dryers. It is a crucial component of the gas valve assembly, responsible for opening the gas valve to allow gas flow to the burner, enabling the dryer to produce heat.

Causes of a bad main coil can include electrical faults such as short circuits or open circuits within the coil, wear and tear from prolonged use, or damage due to overheating. Over time, the coil's ability to control the gas flow can diminish, affecting the dryer's performance.

Symptoms of a bad main coil include:

The dryer not heating up
Intermittent heating during a drying cycle
The dryer taking longer than usual to dry clothes
A clicking sound without the ignition of the burner

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Gas dryer would run but no heat Roger M. • Fabius , NY • September 03, 2016

$26.32

Compare At:: $33.09
You Save:: $6.77

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Blower Wheel

4.8 (31)

By: Ge

Part Number: WE16M15

The Blower Wheel is an OEM replacement part for GE dryers. It has a role in the air circulation within the dryer, aiding in the even and efficient drying of clothes. The blower wheel, connected to the motor, helps in expelling the moist air out of the dryer through the exhaust vent during the drying cycle.

Causes of a malfunctioning blower wheel are typically wear and tear from regular use, the accumulation of lint or debris, or damage to the wheel’s fins or central hub, which can impact its rotation and air circulation capability.

Symptoms of a bad Blower Wheel include:

Unusual noises during operation
Extended drying times
The dryer overheating
Reduced air circulation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer blower wheel rubbed on some part of the housing and made a loud noise when operating Jennifer B. • Houghton , MI • October 04, 2014

New wheel didn't look different than the other wheel, but we put it on, it works and we're very happy. Read more

$60.61

Compare At:: $72.13
You Save:: $11.52

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Clamp And Screw Kit

5.0 (22)

By: Ge

Part Number: WE1X688

The GE clamp and screw kit is an OEM replacement part responsible for securing the dryer blower wheel in place. This kit consists of two clamps and a screw, designed to ensure the blower wheel remains firmly attached to the motor shaft. The clamp maintains the blower wheel's stability and prevents it from coming loose during the drying process. The blower wheel creates the airflow necessary to circulate hot air and efficiently dry clothes.

Over time, clamps and screws can become loose or corroded due to regular use, vibrations, or exposure to moisture. Improper handling during maintenance or repairs can also lead to damage or loss of these small but essential parts.

Symptoms of a bad Clamp and Screw Kit include:

Loose or rattling components within the dryer
Parts becoming misaligned or detached
Unusual noises during dryer operation
Difficulty in securing dryer parts during repairs

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Blower fan had come loose and was hitting the inside of the housing Chris R. • Ridgeland , MS • February 08, 2015

Had to remove the front and top panel on the dryer, disconnect the belt and remove the drum. From there it was two screws to slide out the motor assembly with the fan attached and one bolt to remove the clamp and screw kit holding the fan in place. They kit was worn and was allowing the fan to move forward and back on the motor shaft. Once replaced it took about 5 minutes to reassemble and my dryer now purs like a kitten. Read more

$18.52

Compare At:: $22.04
You Save:: $3.52

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Flame Sensor

4.5 (8)

By: Ge

Part Number: WE4X448

The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.

Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.

Symptoms of a bad flame sensor include:

The dryer not heating or taking longer to dry clothes
The dryer shutting off unexpectedly during a cycle
The igniter glowing but not igniting the gas
Error codes related to heating or ignition issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Dryer heating for only a short time then no heat at all David N. • Fairfax , CA • December 08, 2018

GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes. Also, the old solenoids tested... Read more

$73.36

Compare At:: $86.56
You Save:: $13.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Motor Kit

4.7 (21)

By: Ge

Part Number: WE17X10010

This dryer motor kit powers the drum and blower. Replacing a weak or failed motor restores proper tumbling and airflow so the dryer starts reliably and dries loads more evenly.

Drives the drum via the belt and turns the blower wheel for airflow
Helps resolve: dryer hums but won't start, drum won't turn, or stops mid-cycle
Can reduce loud buzzing/grinding noises from the motor area
Restores consistent operation when the motor overheats and trips its protector

What's included: 1 drive motor Install notes:

Disconnect power; turn off gas supply to gas dryers before servicing
Remove panels to access the drive system; release belt tension and remove the drum as needed
The blower wheel threads onto the motor shaft—support it carefully; many GE dryers use a reverse (left-hand) thread
Transfer wiring and any reusable hardware to the new motor; test before reassembly

Do-It-Yourself Stories from Customers like You Motor was not working Linn C. • Saint Augustine , FL • June 17, 2014

Replaced the motor with a new one, if I can offer any advice about doing this job, make sure to keep track of where each wire goes on the motor and whatever wires need to be disconnected. There are a few good video's online showing how to do this job and can save you a lot of time and frustration. Read more

$156.51

Compare At:: $283.68
You Save:: $127.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rear Drum Support Bearing

4.9 (33)

By: Ge

Part Number: WE3X75

Bearing only, to get complete assembly order WE25M40

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

$18.69

Compare At:: $22.05
You Save:: $3.36

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Round Igniter

4.9 (17)

By: Ge

Part Number: WE4X444

If the mounting clip is burnt order WE1X941.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Igniter was in pieces Gertrude P. • Chicago , IL • June 26, 2015

Removed back panel of dryer. Pulled out part out of its clamp. Placed new igniter in clamp, then dried some clothes and it worked. Read more

$29.95

Compare At:: $66.57
You Save:: $36.62

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Screw

4.5 (6)

By: Ge

Part Number: WH2X930

Black. 8-18 AB HXW 3/8

Do-It-Yourself Stories from Customers like You Oven door trim rusted Gladys R. • Weston , FL • August 08, 2016

I ordered the part and was impressed to receive it within two day! I didn't need the screws I ordered (which I ordered just in case) but the trim was put on with no problem and my oven looks brand new again! Thank you! Read more

$11.74

Compare At:: $14.09
You Save:: $2.35

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Felt Seal (Drum)

4.0 (1)

By: Ge

Part Number: WE9X38

This felt seal creates a smooth, airtight barrier where the drum meets the bulkhead in your dryer. Replacing a worn seal helps maintain proper airflow, protect fabrics from snagging, and reduce scraping or squealing noises during operation. What it does:

Seals the gap between the rotating drum and front/rear bulkhead to contain heat and airflow
Provides a low-friction, cushioned surface for the drum rim
Helps keep lint and debris out of the cabinet
Common symptoms of failure: longer or uneven dry times, rubbing/scraping noises, clothes catching or leaving marks at the drum edge, visibly worn or torn felt

What's included:

1 felt seal

Install notes:

Disconnect power; for gas dryers, also shut off the gas supply
Remove the top/front panel to access the drum and bulkhead; support drum as needed
Remove old felt and adhesive; clean the mating surface thoroughly
Dry-fit the new seal; install per manufacturer guidance; allow proper set time before reassembly
Hand-rotate the drum to verify even contact and clearance, then test operation

Do-It-Yourself Stories from Customers like You The felt seal was worn down resulting in metal on metal grinding from the drum against the inside of the front face Jonathan W. • Lamar , SC • October 27, 2014

I cut power to the dryer. I removed the face of the dryer. I then removed the felt mounts beneath the drum. I removed the old strips of felt and cut the new seal to fit both mounts. I then remounted the felt mounts and replaced the face. Read more

$48.57

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Leveling Leg

5.0 (3)

By: Ge

Part Number: WE1M642

Adjustable

Do-It-Yourself Stories from Customers like You Dryer missing 2 front floor levelers Walter G. • Ocean , NJ • September 14, 2014

Ordered 2 floor levelers based on my dryer make and model number. Read more

$14.37

Compare At:: $17.10
You Save:: $2.73

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Ge part

Burner Assembly (Gas Dryer)

By: Ge

Part Number: WE14M104

This burner assembly is the combustion head for GE gas dryers. It mixes gas and air and directs a stable flame into the heater housing, restoring consistent heat when the original burner is corroded, warped, or clogged.

Directs the gas flame into the heat chamber for proper drying temperatures
Works with the igniter, flame sensor, and gas valve to produce heat
Typical failure symptoms: no heat or intermittent heat, long dry times, burner lights then goes out, unstable/yellow flame
Physical issues can include rust, warping, or blocked burner ports

What's included: 1 burner assembly Installation notes:

Disconnect power and shut off the gas supply; allow the dryer to cool completely
Note position of the igniter and flame sensor relative to the burner port; realign during reassembly
Transfer any reusable fittings from the original burner as needed and verify orifice/fuel type match your installation
After reconnecting gas, perform a leak check with a non-corrosive soapy water solution before restoring power

$58.21

Compare At:: $69.27
You Save:: $11.06

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Ddg5888malwh Parts

Rear Drum Bearing Kit

Idler Pulley

Dryer Drive Belt

Dual Coil

Door Latch

Main Coil

Blower Wheel

Clamp And Screw Kit

Flame Sensor

Dryer Motor Kit

Rear Drum Support Bearing

Round Igniter

Screw

Felt Seal (Drum)

Leveling Leg

Burner Assembly (Gas Dryer)