Erd36sbk Parts

Fix burners that won't light or spark continuously with this igniter. Common cause when burners fail to ignite. Moderately difficult installation.

Replace a worn or missing brass nut securing burner fittings. Restores tight connections in the manifold area. May require pliers or special wrench.

Restore bright, reliable visibility inside your cooking appliance with this 10-watt, 12-volt halogen light bulb. It replaces a burned-out lamp to help you clearly see food progress and keep an eye on cleanup. What it does:

• Provides bright interior illumination inside the appliance
• Replaces a failed or dim light to restore visibility
• Common symptoms: light won't turn on, flickering, or noticeably dim output
• Built to match original 10W/12V halogen specifications for proper performance

• 1 halogen bulb (10W, 12V)

• Disconnect power at the breaker before servicing; allow the area to cool completely
• Handle the bulb with clean gloves or a tissue—skin oils can shorten halogen bulb life
• Insert fully and ensure the light housing/cover is secured before restoring power
• Use only the specified wattage and voltage recommended for your model

This is a replacement cooling fan assembly designed to restore airflow in the refrigerator condenser/vent area for stable temperatures and improved efficiency. Fits service replacement applications where the original fan is damaged or fails. What it does:

• Circulates air across condenser/evaporator components to help maintain proper cooling
• Reduces overheating by improving airflow through heat-exchange areas
• Stops symptoms such as weak cooling, warm spots, or a non-spinning fan
• Helps eliminate abnormal fan noise when the motor or blades are failing

• Disconnect power to the appliance before any service to avoid shock or injury
• Access may require removing panels or shelving; keep fasteners and clips for reassembly
• Handle the fan blades and motor carefully to avoid bending or damage
• If wiring connectors or mounts are worn, replace or secure them during installation

If your oven won't ignite or heat, the hot surface igniter likely needs replacement. This part ignites gas to heat your oven. DIY-friendly repair.

Fix uneven baking and weak convection heat with a new convection element. Restores consistent hot air circulation for even cooking and roasting.

Oven won't heat or shuts down unexpectedly? A failed thermal cut-off switch interrupts power when temperatures exceed safe limits. Direct replacement.

Replace your rusty or damaged large burner cap to restore even flame distribution and protect your gas burner from spills. Direct-fit part installs in minutes.

This burner O-ring seals the D burner assembly on gas cooktops. It helps keep the fuel path airtight and protected from spills, supporting consistent ignition and a stable, properly shaped flame.

• Maintains a seal between burner components to preserve correct gas/air mixture
• Helps prevent leaks and moisture intrusion around the burner well
• Can contribute to resolving weak/uneven flame, flame lifting, or hard-to-ignite burner when the original seal is worn
• Replaces cracked, flattened, swollen, or missing O-rings

• Turn off gas supply and disconnect power. Allow the cooktop to cool completely.
• Remove grates, burner caps, and the burner head to access the O-ring; note the original orientation.
• Clean mating surfaces; install the new O-ring carefully without twisting or pinching.
• Reassemble, restore gas/power, and perform a leak check. Test burner operation.

Fix burners that won't light with this spark module. Controls the ignition system that creates sparks to ignite gas burners on ranges and cooktops.

Secures panels, brackets, and trim inside your appliance. Replace this wafer head screw if the original is missing, stripped, or damaged during repairs.

Factory wafer-head Phillips screw (#8 x 3/8 in) secures panels, brackets, and covers. Replace missing, stripped, or damaged screws for proper alignment.