Ffue2022awg Parts

The Clip is an OEM replacement part for Frigidaire refrigerators. It works to securely hold various refrigerator components such as shelves or baskets in place. The clip applies tension to prevent shelves from shifting or drawers from opening unintentionally during regular usage and cleaning. 

Causes of a bad clip can include cracks or breaks from over-tightening or repetitive fastening and unfastening over time. The clip’s plastic material can also become brittle or misshapen with age.

Symptoms of a bad clip include: 

• Shelves or baskets that no longer stay firmly in place and slide around easily inside the refrigerator 
• Gaps appearing around refrigerator shelves where the clip has failed to hold tightly
• Difficulty accessing certain refrigerator areas if shelves or other components now slide freely

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Clip is an OEM part for Frigidaire refrigerators. It is a small but crucial component that helps secure and hold various parts in place within the refrigerator's interior or exterior.

Causes of a bad clip in a refrigerator can include wear and tear over time, brittleness due to age or exposure to temperature changes, or accidental breakage during cleaning or maintenance.

Symptoms of a bad clip in a refrigerator may include:

• Loose or detached shelves, bins, or door components
• Rattling or vibration noises coming from the interior
• Improper alignment or fit of shelves or door components
• Potential safety hazards if electrical wiring is not properly secured

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Main Board is an OEM part for Frigidaire upright freezers. Located inside the freezer control panel, this board houses critical electronic components that direct functions like temperature regulation, defrost cycles, display lighting, alarmers, and more. As the central "brain" of the appliance, a faulty board can disrupt overall performance.  

Symptoms of a bad main board include:

• Fluctuating or inconsistent temperatures
• Failure to maintain desired freezing levels  
• Display/control panel not lighting up or working properly
• Audible/visible alarm indicators not activating as expected

Causes of a bad board can include failures over time due to repeated powering on/off, moisture ingress shorting connections, or surge damage interfering with operation.

This Frigidaire OEM replacement main board is programmed to function identically to the original. This board is also compatible with some additional Electrolux, Gibson, and Kenmore upright freezer models. 
 

The Freezer Wire Harness is an OEM replacement part for Frigidaire refrigerators. It offers a series of color-coded wires that transmit control signals throughout the freezer compartment. 

Causes of a bad wire harness can involve typical fraying or cracking of insulation from continuous use over time. Rodent damage or accidental cutting during appliance repairs are other potential issues.

Symptoms of a bad freezer wire harness include:

• Lights or other freezer features not functioning properly
• Error codes or control issues with freezer operation  
• Overcooling or warm spots developing in the freezer
• Responsiveness problems with freezer controls and components

This Frigidaire OEM replacement is compatible with some Electrolux, Maytag, and Kenmore models as well.

The Harness Assembly is an OEM part for Frigidaire freezers. It is a bundle of color-coded wires that connect electronic and mechanical components inside the freezer, allowing them to communicate and function as intended. The harness assembly reliably transmits signals from the control board to things like fans, temperature sensors, and door alarms.  

Symptoms of a bad harness assembly include:  

• Components not receiving power or control signals
• Intermittent operation of internal lights or fans  
• Temperature control or cooling issues
• Buzzing or humming noises from loose wires
• Error codes related to communicating with modules

Causes of a bad dispenser can include damage over time from repeated bending and flexing of wires, rodent chewing, or corroded connections.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This factory heater restores controlled heat in the appliance's heating or defrost circuit so cycles complete correctly and performance returns to normal. Replacing a failed heater helps resolve temperature-related issues and reduces extended run times. What it does:

• Generates heat for the unit's designed function (wash/dry assist or defrost), depending on model
• A failed element can cause no heat, extended cycles, or temperature-related error codes
• Result in dishes staying wet or detergent not dissolving (dishwashers)
• Lead to frost/ice accumulation that doesn't melt during defrost (refrigeration)
• Often tests open (no continuity) when defective

• 1 heater

• Disconnect power before servicing; turn off water supply if applicable
• Access and mounting vary by model—refer to the product's service information
• Note wire positions; make firm, original-style connections and avoid stressing terminals
• After reassembly, run a test and check for leaks where the heater passes through the tub (if applicable)

The Fan Motor is an OEM component for Frigidaire refrigerators. Located inside the refrigerator compartment, this specialized motor powers airflow and circulation through ducts within the cabinet.

Causes of a malfunctioning fan motor can include normal wear from constant operation, collecting debris that causes imbalance or binding, and motor winding failure over extended use.  

Symptoms requiring replacement are: 

• Reduced/insufficient air circulation within the refrigerator  
• Abnormally high temperatures or frost accumulation
• Loud buzzing or grinding noises emanating from the motor

This OEM part fits Electrolux, Gibson, Kelvinator and select Kenmore models as well for a direct fit. Replace promptly for dependable fan performance.

The Condenser Fan Motor is an OEM part for Frigidaire refrigerators. Located behind the rear refrigerator wall and grille, the condenser fan motor works to dissipate heat from within the refrigerator system. 

Symptoms of a bad condenser fan motor include:

• Refrigerator failing to adequately cool or ice up  
• Increased humming and vibrations
• Elevated compressor run times 
• Warm air discharge from rear grill

Causes of a bad condenser fan motor can include winding failures, bearing seizing, or obstructed fan blades no longer spinning freely.

This genuine OEM Frigidaire motor is compatible with some Electrolux, KitchenAid and Danby French door refrigerator models as well.

The Screw is an OEM hardware component specifically designed for Frigidaire refrigerators. These fasteners secure interior shelves, bins, and exterior trim panels through precise threaded shafts. 

Symptoms of damaged or missing screws include:

• Shelving and bins becoming loose or detached within the fridge
• Door and side panel seals shifting out of position

Causes related to normal wear from repeated shelf adjustments over years of use. Potential impacts during moves can also strip or bend screws.

This OEM Frigidaire hardware is also compatible with Electrolux and Crosley refrigerators. Replacing loose or damaged screws preserves proper mounting of critical refrigerator accessories as intended by engineering specifications. Maintaining the integrity of small components avoids potential repairs.
 

The Inverter is an OEM part for Frigidaire refrigerators.  

Causes of a bad inverter can be wear and tear over time, exposure to electrical surges or power fluctuations, or damage due to fluid leaks or impacts.

Symptoms of a bad inverter include:

• Inconsistent or fluctuating interior temperatures
• Freezer or refrigerator sections not reaching proper temperatures
• Electrical noises or burning smells coming from inside the refrigerator
• The refrigerator failing to power on or cool after a power outage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This aluminum strap secures the defrost heater firmly against the evaporator coil to maintain proper contact during defrost. Correct contact improves heat transfer so frost melts evenly and helps prevent recurring ice buildup on the evaporator.

• Secures the defrost heater to the evaporator for proper contact and heat transfer
• Promotes complete, even defrosting across the evaporator coil
• Helps reduce repeat frost/ice accumulation caused by a shifted or loose heater
• Typical clues include a loose heater, uneven frost pattern, or rattling near the evaporator

• Disconnect power and allow ice to melt before accessing the evaporator
• Use care around sharp fins and fragile refrigerant tubing; do not puncture or deform the coil
• Position the heater per your model's parts diagram and tighten the strap for firm, even contact
• Verify wiring is routed clear of the fan and moving parts before reassembly

The Refrigerator Hook-Auto Closer is an OEM part for Frigidaire French door refrigerators. Located on the top inside edges of the refrigerator doors, the hook-auto closer attaches the closing mechanism arms to allow automatic opening and closing functions. 

Symptoms of a bad hook-auto closer include: 

• Doors detached from closing mechanism  
• Linkages slipping out of place 
• Loose or unstable door movement
• Grinding noises when doors open or close

Causes of a bad hook-auto closer can be damage or deformation from excessive impact, broken weld points, or normal wear over time.

This genuine Frigidaire part is compatible with some Electrolux and Kenmore French door refrigerator models as well.

The Knob is an OEM component specifically designed for Frigidaire refrigerators. As an interface control, it allows settings of temperature and functionality through an intuitive analog mechanism. 

Causes of knob failure relate to general wear from frequent manual adjustments over many years of use. Exposure to cleaning chemicals can also deteriorate printed markings.

Symptoms of a defective knob include:

• Difficulty turning or selecting desired temperatures  
• Knob detaching from stem or shattering
• Faded markings confusing temperature display

This OEM Frigidaire part is also compatible with Electrolux and Crosley brand refrigerators. Replacing worn knobs preserves simple temperature navigation and indicator visibility to optimize the user experience as intended by the manufacturer. Maintaining interface controls avoids potential frustrations.
 

The Air Tower is an OEM part for Frigidaire refrigerators. The cover helps circulate cold air throughout the freezer while also protecting internal components from damage or debris.

Over time, freezer air tower covers can become damaged or discolored due to repeated exposure to cold temperatures and humidity inside the freezer. Signs of a bad cover include cracks, holes, or missing pieces that compromise its ability to properly ventilate the freezer.

Symptoms of a bad freezer air tower cover include:

• Inefficient air circulation leading to warmer freezer temperatures
• Formation of ice buildup around the evaporator coil
• Exposure of internal freezer components to damage or contamination

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement door magnet that helps the refrigerator or freezer door stay closed for a tighter seal and more consistent cooling. Restores magnetic hold so doors close reliably and reduce warm spots. What it does

• Provides magnetic hold for the door liner so the door stays shut during normal use
• Helps maintain the gasket engagement to preserve internal temperature
• Common symptom: door not staying closed, food warming, or frost build-up near the door
• Used in door/gasket assembly where magnets secure the seal

• Turn off power to the appliance or unplug before removing door trim or accessing internal components
• Remove door liner or gasket per service instructions to access and replace the magnet; keep fasteners and seals intact
• Press or seat magnet into its channel or mounting location; use the OEM fastener or adhesive method specified by the manufacturer