Need Help?
Call or text
Traps grease and smoke from cooking. Replace when clogged or damaged to maintain ventilation efficiency. Verify compatibility with your model number.
Just installed it to the wall & presto... Read more
Microwave won't start or light stays on when door closes? A faulty door latch prevents proper switch engagement. DIY repair typically takes 15-20 minutes.
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more
The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.
Symptoms of a bad door switch can include:
Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.
This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.
I diagnosed this problem via the web and the advice was spot on. The problem was a failure of the bottom door switch. I used a multimeter to verify that the switched never closed properly. It took me a minute to figure out how to remove the old switch (press a release tab under the switch while simultaneously rotating counter-clockwise). That was about the most difficult part of the repair. Read more
Restores interior and cooktop lighting in your microwave. Replace when bulb burns out or dims for clear visibility. Verify fit with your model number.
I replaced the bulbs in my over stove microwave light. Read more
Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.
This replacement motor restores reliable rotation to the component it drives—bringing back proper airflow or mechanical movement so your appliance runs as designed and noise is minimized.
Start bye removing the three screws that hold the underside of the microwave up. Once those are undone, the panel pivots down. You then need to un-attach the lights so the panel will totally come off and out of the way. The motor is plainly visible. Remove the power plug and remove the one screw then it twists out of its slot. Install the new motor and reverse the directions. Read more
Replacement glass turntable tray for your microwave. Installs on the rotating support to hold food during cooking. Replace if cracked, chipped, or broken.
A phone call to your company where a very helpful sales associate took the information I gave him including the model number of my Microwave oven. He assured me the one he recommended would be the correct size--and it was!! The item came to my address in 2 days in perfect condition and I washed it and placed it on the turntable. Couldn't have been easier, I just wish I'd done it sooner because trying to use a plate from another used Microwave oven was not successful! A very satisfied... Read more
Controls airflow in your microwave's exhaust vent system. Installs between blower and duct. Replace if cracked, broken, sticking, or missing.
It took less than a minute to find the replacement part on your website and another minute to order it. The damper was delivered well packed and in good condition in a day and a half. It took about 15 minutes to install using only a small straight slot screwdriver to lift the tabs on the oven top. Read more
Secures microwave components to cabinet or frame. Replace when bracket is broken, cracked, or worn causing misalignment or excess vibration during operation.
New part worked fine. Read more
Protective panel that shields microwave magnetron from grease and food splatter. Snaps into interior cavity. Replace when cracked, burned, or missing.
Replaced the cover took care of the sparking and replaced the motor to fix the plate not turning. Read more
This switch/fuse kit replaces a worn or failed control switch and associated fuse to restore reliable power control. It provides the exact components needed to address common start and power interruptions. What it does:
Microwave won't turn on, made popping noise, or smells like burned electrical? The noise filter often fails when solder joints arc or short out.
Was lucky enough to find the replacement part easily on AppliancePartsPros.com at a super fair price. They had the part at my door in less than two days! Simply unplugged the terminals from the fried board, and plugged onto the new board. Reassembled microwave. Read more
Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.
I ordered a replacement handle from Appliance Parts Pro.com and installed it after watching the video at their site for a similar model. The video told of the trick on removing the door surround that allowed me to access the handle screws. I purchased new handle screws at the same time I bought the new handle. The new handle and screws were a bit different than the original but fit perfectly. Hopefully it will be more durable than the original handle. Read more
Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.
A replacement unified-thread screw used to secure appliance panels and internal components. Provides a direct fastener to restore secure attachment when original screws are missing, damaged, or corroded. What it does:
We had a problem with the magnetron a few years ago while it was still under warranty so they sent me a new magnetron but when the repairman showed up he had a new one also and said just keep it as a spare (no charge). It's an over-the-range microwave so taking it down takes a little bit of an effort, cumbersome more than anything. Got it down to my work bench, took off the housing, checked to make sure the capacitor was discharged, removed the capacitor (diode is attached to it) and... Read more