Ffbd1821mw Parts

The Side Mount Kit is an OEM replacement part for Frigidaire dishwashers. It contains mounting brackets, screws, and other hardware required to securely install the dishwasher against cabinetry in a side-by-side configuration. Proper attachment is necessary for stability and safety during operation. 

Symptoms of damaged or missing mounting hardware include:

• Excessive movement or rocking of the dishwasher body
• Potential detachment from cabinets  
• Screws pulling loose from repeated vibrations
• Improper door alignment causing difficulty closing fully

Causes related to normal wear over extended use periods. Damage may occur if weight is applied during improper lifting or installation attempts.  

Compatible models include Electrolux, Gibson, and select Kenmore units.

The Gasket is an OEM part for Frigidaire dishwashers. This gasket, also known as a door seal, is designed to form a watertight seal around the dishwasher door, preventing leaks during the wash and rinse cycles.

Causes of a bad gasket can include wear and tear from regular use, exposure to high temperatures and detergent chemicals, and damage from sharp objects or improper loading of dishes. Over time, the gasket material can degrade, losing its elasticity and sealing effectiveness.

Symptoms of a bad gasket include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks, tears, or deformation in the gasket
• The dishwasher door not closing properly or sealing tightly
• Moisture or mold buildup around the door seal area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Valve is an OEM part for Frigidaire dishwashers. This valve controls the flow of water into the dishwasher, ensuring the correct amount of water enters the tub during the wash cycle.

Causes of a bad water valve can include mineral buildup from hard water, electrical failures, or wear and tear from regular use that affects the valve's ability to open and close properly.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Leaking water around the valve area
• Inconsistent or insufficient water levels during cycles
• Unusual noises when the valve is in operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement pump moves water/condensate through your appliance so it can drain or recirculate as designed. Replacing a weak or failed pump restores proper water removal and helps prevent leaks, overflows, or nuisance shutoffs.

• Moves collected water from the sump/collection area to a drain hose or internal passage
• Maintains correct water level to prevent overflow conditions
• Common failure signs: water won't pump out, leaks near the base, or loud buzzing/grinding from the pump
• May trigger "bucket full," drain, or pump-related error indicators, depending on the model

• Disconnect power before servicing; allow unit to cool, and expect residual water in the lines or pan
• Note hose routing and wiring connections; transfer any clamps, grommets, or fittings from the old pump if reused
• Ensure hoses are fully seated and not kinked; tighten connections and check for leaks after reassembly
• Test operation after installation and water is expelled properly

This basket assembly replaces a damaged or missing basket in your appliance to restore organized storage and proper support for items. A precise, model-specific fit keeps contents secure and helps maintain accessible, usable space.

• Provides a designated container/support for contents within the compartment
• Helps prevent items from tipping or shifting due to a cracked or warped basket
• Restores lost capacity and correct fit when the original basket is broken or missing
• Direct replacement engineered to fit the original mounting location in your model

• Disconnect power and remove any contents before servicing
• Note the basket's orientation and engagement with rails/tabs before removal
• Transfer and reuse any original screws or clips if your model uses them
• Seat the new basket fully and verify a secure fit and smooth operation

This replacement hose restores a secure, leak-resistant path for air or condensate in your appliance. Replacing a cracked, kinked, or brittle hose helps maintain proper flow, prevents leaks, and supports overall performance.

• Channels air or water as designed to ventilate or drain the unit
• Helps maintain a sealed connection at fittings to minimize leaks
• Flexible design supports correct routing without sharp kinks
• Common symptoms: visible cracks or brittleness, kinks, leaks, poor draining or reduced airflow

• Disconnect power and, if applicable, shut off water before servicing; allow components to cool.
• Place towels/containers to catch residual water; wear gloves to protect from sharp edges.
• Transfer and reuse existing clamps/adapters if required; replace any worn seals or clamps.
• Route without sharp bends; fully seat and secure both ends; test for leaks or airflow after installation.

A replacement dispenser assembly for refrigerator doors that secures dispenser components and restores normal dispenser function and appearance. Installs in the door to replace cracked, loose, or damaged dispenser housings and trim. What it does:

• Provides the mounting and trim for the door dispenser spout and controls.
• Restores proper alignment and fit when the original dispenser housing is cracked, broken, or loose.
• Helps stop rubbing or interference that can cause the dispenser lever or ice/water chute to stick.
• Addresses visible damage and improves the door's finished appearance.

• Disconnect power and shut off the water supply before starting work.
• Installation typically requires removal of the inner door panel and removal/installation of screws and clips; save all hardware.
• Handle door trim and any water lines carefully to avoid damage; check for leaks after reconnecting the water.

This door-mounted switch detects when a refrigerator/freezer door is opened and closes the circuit to control the interior light and door-sensing functions, restoring proper light and access control. What it does

• Opens/closes the electrical circuit when the door is closed or opened to turn the interior light on/off
• Restores normal interior lighting when a failed switch causes the light to stay off or on
• Helps the appliance detect door-open/closed status for related functions
• Compatible with common door-frame mounting and wiring harnesses used on many Frigidaire units

• One door switch assembly

• Disconnect power before inspecting or replacing the switch to avoid shock
• Verify correct connector orientation and secure mounting before restoring power
• Do not use part if wiring or connectors are burned or damaged; replace harness as needed

This spring-style clamp secures flexible hoses and tubing on appliance water and drain connections to help stop leaks and maintain a tight seal. A simple replacement when original clamps corrode or lose tension. What it does:

• Holds hose or tubing firmly on barbed fittings to prevent leaks and disconnections
• Restores reliable sealing on water inlet, drain, or vent hose connections
• Commonly used where a compact, tensioned clamp is required
• Helps stop symptoms like dripping, puddling, or loose hose connections

• One spring-style clamp

• Turn off power and water supply to the appliance before servicing
• Use pliers to expand the clamp for removal and installation; avoid sharp tools that can damage the hose
• Replace any hoses or fittings that show damage or excessive wear

This lower dishwasher rack replaces a worn, bent, or damaged lower basket to restore secure support for plates, bowls and cookware so dishes load and wash as intended. Durable finish helps protect items from chipping. What it does:

• Supports and organizes dishes on the dishwasher's bottom level for proper water coverage
• Restores missing or broken rack rails and tie-downs that can allow dishes to shift
• Reduces contact damage from sliding or collapsed rack areas
• Helps ensure proper drainage and spray access to bottom-rack items

• One lower rack

• Remove dishes and unplug or turn off power to the dishwasher before servicing
• Slide out and detach old lower rack; align new rack on bottom rails and test smooth travel
• Use gloves to avoid sharp edges and protect the rack's coating during installation
• No special tools typically required; inspect rollers and tracks and replace if worn

Wire rack assembly that restores stable support and spacing for cookware or dishes in your appliance. Replaces bent, worn, or damaged racks so items sit level and slide smoothly for safer loading and more consistent results. What it does:

• Provides sturdy support for cookware, bakeware, or dishes and maintains proper clearance inside the appliance.
• Ensures smooth sliding and correct positioning so racks don't bind, tilt, or drop when pulled out.
• Replaces bent or corroded wires that can catch, scratch, or allow items to tip.
• Helps restore even airflow and consistent performance where rack position affects cooking or cleaning.

• Remove all food, dishes, and loose parts before installing; allow the appliance to cool if recently used.
• Wear gloves to protect hands from sharp wire ends; handle the rack carefully to avoid bending.
• Slide the rack into the designated tracks or supports until it seats fully; verify rollers or stops are aligned.
• Follow the appliance owner's manual or OEM instructions for final adjustments and safe operation.

This thermistor is a temperature-sensing probe used by the refrigerator control board to monitor compartment temperature and help maintain proper cooling. Installing a correct thermistor restores accurate temperature feedback for efficient operation. What it does:

• Reads air temperature at its mounting location and sends that signal to the control board
• Helps control compressor, evaporator fan, and defrost cycles by providing accurate temperature feedback
• Common symptoms of a failing thermistor: improper or fluctuating temperatures, compressor cycling on/off, or temperature-related error codes
• Works as a direct replacement when the original thermistor fails or the wiring/connector is damaged

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Replace with the same type and mount in the original location to ensure correct temperature sensing
• Handle the sensor and wiring gently; avoid bending or stressing the probe or leads

This dispenser assembly directs and delivers water or ice from the refrigerator door for convenient dispensing. It replaces a worn or damaged dispenser to restore proper delivery and help prevent leaks or malfunctions. What it does:

• Routes water/ice from the supply through the door for dispensing
• Supports dispenser lever/actuator operation and button control
• Helps maintain a sealed pathway to reduce dripping or leaks at the door
• Restores normal dispensing when a cracked or broken dispenser causes poor flow

• Disconnect power and shut off the water supply before starting
• Remove the freezer/refrigerator door trim/panel to access the dispenser per your model's service instructions
• Inspect and reuse or replace any seals, gaskets, or mounting hardware only if specified
• After installation, restore water, check for leaks, and verify proper dispensing