Dh30c Parts

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Replacement service filter that restores correct filtration/airflow during maintenance or repairs. Designed for use as the factory service filter to help maintain performance and reduce debris-related issues in compatible Samsung appliances. What it does:

• Captures debris and particulates to protect internal components and air/water passages.
• Helps reduce airflow restriction that can cause reduced performance or extended cycle times.
• Can address symptoms like unusual noises, error codes tied to blockage, or visible filter damage.
• Keeps systems cleaner between scheduled service intervals when installed per OEM guidance.

• Disconnect power (and water if applicable) before accessing the service area.
• Replace with the filter oriented and seated per the appliance's service manual.
• Inspect the housing and seals for damage; replace any worn parts before reassembly.

This slide temperature control is the user-access interface that moves the thermostat connection to select dryer heat levels. It restores responsive, indexed temperature selection for standard slide-style dryer controls. What it does

• Moves the internal contact to select low/medium/high heat settings for the dryer
• Replaces worn or loose slider that causes inconsistent or stuck temperature selection
• Helps correct symptoms such as inability to change heat level, intermittent temperature changes, or a slider that feels loose or won't stay in position
• Works as the mechanical interface between the console knob/lever and the dryer's control assembly

• One slide temperature control (single slider assembly)

• High-level replacement for users comfortable removing control consoles; disconnect power before service
• Handle control panel clips and trim carefully to avoid cracking plastic bezels
• Verify proper seating and alignment of the slider on the control shaft before reassembly

Size: 5/16 inch.

Size: 3/8 inch.

Size: 3/4 inch.

Size: 1/4 inch.

A replacement service trim lamp assembly that restores interior lighting so you can safely see and use the appliance during operation and maintenance. Fits the listed part number and ships as a single lamp assembly. What it does:

• Provides interior/trim lighting where factory trim lamps are used
• Replaces a burned-out, dim, or flickering lamp to restore usable illumination
• Helps when the light does not turn on or only works intermittently
• Intended for service/repair use in compatible appliances

• Always disconnect power to the appliance before beginning any repair
• Allow the appliance and existing lamp to cool before handling
• Use basic hand tools and handle the lamp carefully to avoid breaking the bulb or touching glass with bare hands

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This service selector knob is the user control used to select cycles or service settings on compatible Samsung appliances, restoring tactile control and clear position selection. It fits the control shaft and provides durable manual operation. What it does:

• Replaces a worn, cracked or missing service/selector knob so you can rotate and set cycles or service modes
• Restores a secure grip and clear detent positions for reliable control selection
• Helps stop slipping or loose control feel that prevents setting the dial accurately
• Works with the appliance control shaft to transmit user input to the control assembly

• Designed for shaft-mount replacement; pull off the old knob and press the new knob onto the control shaft
• Make sure the control is in the correct position before installing to align any internal splines
• Disconnect power to the appliance before attempting repairs to avoid shock or machine operation

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

A small replacement service cap that snaps into the appliance's control panel to cover the fan indicator. Restores the original look and keeps the panel clear and protected from dirt and wear. What it does:

• Covers the control-panel cutout for the fan indicator to restore the original appearance
• Keeps dirt and debris out of the indicator opening
• Provides the visible fan icon for correct user feedback
• Helps prevent accidental pressing or damage to the underlying switch or indicator

• Disconnect power to the appliance before starting any work
• Typically snaps into the panel opening; remove the trim or bezel if needed for access
• Align the icon and press gently until the cap clicks into place; do not force

This lamp holder is the replacement socket that secures and powers an interior appliance light bulb, restoring reliable illumination so you can see inside the appliance for loading, cleaning, and inspection. What it does

• Holds and connects the interior lamp to the appliance wiring so the bulb receives power
• Replaces a cracked, burned, or loose socket that causes the light to flicker or not turn on
• Provides the mounting and electrical contact for standard appliance interior bulbs
• Helps restore safe, visible interior lighting for troubleshooting and normal use

• Disconnect power (unplug or turn off circuit breaker) before starting; work on energized circuits can cause injury.
• Handle bulbs and the socket carefully to avoid breakage; wear gloves and eye protection as needed.
• Check that the replacement part matches your existing socket before installation; do not force connections.

This is a replacement light dimmer cap for the appliance control panel that restores a secure, easy-to-use interface for the service/dimmer control and improves user access and appearance. What it does:

• Replaces a cracked, missing, or worn dimmer cap so the dimmer control can be operated properly
• Protects the dimmer switch shaft from dirt and wear
• Restores the original look and tactile feel of the control panel
• Resolves intermittent or hard-to-turn dimmer operation caused by a damaged cap

• One light dimmer cap

• Disconnect power to the appliance before servicing to avoid shock or injury
• Typically installs by snapping onto the dimmer shaft; no special tools required, but small trim tools or needle-nose pliers can help
• Inspect the dimmer shaft and surrounding bezel for damage; replace the switch or bezel if needed