Gfws3500lww Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The GE pump is an OEM replacement part responsible for removing wastewater from the washing machine during the drain cycle. It pumps out the soiled water from the washer's tub, ensuring that it is expelled through the drain hose and into the plumbing system or utility sink. The pump consists of an electric motor and an impeller that move the water effectively.

Causes of a bad pump can include clogging from debris or lint, wear and tear from regular use, or damage to the pump impeller or motor. Exposure to harsh chemicals or overloading the washer can also contribute to pump failure.

Symptoms of a bad pump include:

• Water not draining from the washer
• Unusual noises such as humming or grinding during the drain cycle
• Error codes related to drainage issues
• Water leaking from the bottom of the washer

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Lock Assembly is an OEM replacement part for GE washing machines. It secures the washer door safely closed during operation. The assembly features a locking mechanism that withstands vigorous cycles while preventing small hands or objects from opening it inadvertently.

Causes of a bad door lock can include worn parts from repetitive use that become misaligned and fail to lock properly. Damage from forced opening can deform lock components.

Symptoms of a bad door lock assembly include:

• The door popping or creeping open during cycles
• Difficulty latching or hearing the door lock "click" closed
• Error codes related to an unsecured door

This OEM part is also compatible with Hotpoint, RCA, and select Kenmore models.

The Driving Belt is an OEM part for GE washing machines. This part connects the motor to the drum, facilitating the drum's movement during the wash and spin cycles, ensuring your laundry is cleaned effectively.

Common causes of a bad driving belt include normal wear and tear, overloading the washer, or exposure to high heat or friction. 

Symptoms of a bad Driving Belt include:

• Drum not spinning or agitating
• Washer making unusual noises during operation
• Burning smell from the washer
• Visible cracks or wear on the belt

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drive Pulley Kit is an OEM part for GE washing machines. The drive pulley works by transferring the motor's power to the drum via the drive belt, ensuring the drum rotates properly during the wash and spin cycles.

Causes of a bad drive pulley can include wear and tear over time, damage due to overloading the washer, or issues such as misalignment or loose components.  

Symptoms of a bad drive pulley include:

• Loud, unusual noises during operation
• The drum not spinning or agitating
• The washer not completing cycles properly
• Visible damage or wear on the pulley

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This drain pump filter traps lint, coins, and small debris before they reach the pump, helping your washer drain properly and protecting the pump from damage. Replace a broken or clogged filter if you notice slow draining or a leak at the filter access.

• Screens out debris before it reaches the drain pump
• Helps maintain proper draining performance
• Common symptoms of a failed or missing filter: not draining/slow drain, leak at the filter access, or pump noise from debris
• Prevents hard objects from entering the pump and causing damage

• Disconnect power and turn off water before servicing
• Expect residual water; place towels or a shallow pan under the filter area
• Access the filter, unscrew and remove the old filter, and clear any debris from the housing
• Install the new filter and hand-tighten to seal; run a short drain cycle and check for leaks

This suspension spring supports and stabilizes the washer tub, controlling movement during wash and spin. Replacing a weak or broken spring helps restore balance, reduce vibration, and prevent the tub from leaning or striking the cabinet.

• Supports the tub assembly within the cabinet and carries load
• Limits tub motion to reduce shaking and out-of-balance interruptions
• A stretched or broken spring can cause excessive vibration, banging, or a low/leaning tub
• Visual signs include broken coils or uneven tub height

• Disconnect power; turn off water and move the washer for safe access
• Springs are under tension—support the tub and wear hand/eye protection
• Note the original spring's location and orientation; reinstall in the same position
• After replacement, ensure the tub sits level and clears the cabinet on all sides

This diverter valve directs wash water inside the machine, switching flow between internal paths during wash and drain/recirculation steps. Replacing a failed diverter restores proper water routing so cycles advance and complete as designed.

• Redirects water between the drain and recirculation/spray paths as commanded by the control
• Ensures correct water flow for wash, rinse, and drain steps
• A sticking or failed diverter can cause slow/no drain or no recirculation/spray
• May lead to cycle pauses/errors, unusual clicking/buzzing from the valve area, or leaks at the valve body/ports

• Unplug the washer and turn off water supply; expect residual water in hoses
• Access location varies by model; typically mounted along the pump/hoses under the cabinet
• Move hoses/clamps and the electrical connector one at a time; match port orientation
• After installation, run a rinse/drain test and check all connections for leaks

This outer door gasket clamp secures the washer's door boot to the front panel, keeping the seal tight around the door opening to help prevent leaks and keep the gasket seated during operation.

• Holds the outer lip of the door gasket (boot) against the front panel
• Helps maintain a watertight seal at the door opening
• Replace if the clamp is bent, stretched, broken, or missing
• Symptoms include the boot slipping off, water leaking at the front, or a loose gasket

• Disconnect power and wear cut-resistant gloves for safety.
• Open the door, gently pull back the gasket, and remove the old outer clamp.
• Ensure the gasket is fully seated on the front panel lip, then install the new clamp evenly around the opening.
• After installation, run a short cycle and check for leaks around the door.

Note: Due to design change, new part may look different but is still a functional replacement.

This drain hose coupling joins two sections of a washer's drain hose to create a secure, leak-resistant connection. Replace a cracked or loose connector to help prevent leaks and support proper draining performance. What it does

• Connects two drain hose sections for proper water discharge
• Maintains a tight, sealed joint to help prevent leaks at the hose connection
• Restores a secure hose path if the original coupling is cracked, worn, or missing
• Common symptoms: water on the floor during drain, loose hose connection, or hoses separating

• Drain hose coupling

• Disconnect power and turn off water before servicing; pull the washer forward for access
• Place a towel or pan to catch residual water from hoses
• Loosen hose clamps, remove the old coupling, fully seat both hose ends on the new coupling, and tighten clamps securely
• Run a brief drain/rinse and inspect the connection for leaks

The Washer Door Glass is an OEM part for GE washers. This glass serves as a protective barrier while allowing you to observe the washing process inside the machine. The door glass is designed to withstand the rigors of regular use and maintain transparency for a clear view of your laundry.

A bad door glass can occur due to accidental breakage or cracks over time. If you notice signs of damage, such as shattered or missing pieces, it may be time to replace the door glass.

Symptoms of a bad door glass include:

• Shattered or broken glass
• Visible cracks or chips
• Inability to see through the glass

Restore the function of your GE washer by replacing the damaged door glass with this genuine part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This outside drain hose directs wastewater from your washer to the household drain. Replace a cracked, kinked, or leaking hose to stop leaks and restore reliable draining at the end of each cycle.

• Routes discharge water from the drain pump to a standpipe, laundry tub, or sink
• Helps maintain proper flow during drain/spin to prevent backups
• Common signs of failure: water leaking behind the washer, slow or incomplete draining, or drain-related error messages
• Visual clues include cracks, pinholes, bulges, or severe kinks

• Disconnect power and water; pull the washer forward for access and place towels/bucket as needed
• Note hose routing and connection points; release clamps and remove the old hose
• Fully seat the new hose; reuse existing clamps/hangers as required. Route without kinks and maintain proper standpipe height
• Run a test drain/rinse and check all connections for leaks

EMI filter reduces electrical noise on the appliance's incoming power line to help protect electronic controls and cut down on radio/TV interference. It restores proper power filtering for appliances that show noise-related control issues. What it does:

• Filters electromagnetic and radio-frequency interference on the power input to prevent electrical noise from affecting control boards and sensors.
• Helps reduce visible or audible interference with nearby electronics such as radios, TVs, and audio equipment.
• Can address intermittent control errors, unexpected resets, or erratic operation linked to line noise.
• Provides the correct connection point for the appliance's power input so the control circuitry receives cleaner power.

• Disconnect power at the breaker and unplug the appliance before starting any work. Verify power is off with a tester.
• Match wiring colors and terminal types; secure all connections and route wires clear of moving parts.
• Some installations require removing access or control panels—retain fasteners.

The TUB SEAL is an OEM component specifically designed for GE washers. It is a rubber gasket located between the inner and outer wash tubs designed to prevent leaks. During cycles, the seal withstands contact with fast spinning and surging water pressure to maintain a watertight barrier. 

Symptoms of a bad tub seal include: 

• Puddles, drips, or leaks visible beneath the unit during or after cycles
• Excess moisture trapped between the inner and outer tubs
• Mineral or soap film buildup indicating escaping water 

Causes can be cracks developing from age and repetitive flexing during cycles, or deformities in the rubber preventing proper compression.

Replace yours today with this genuine OEM GE part to ensure a dependable water containment solution. This GE replacement part is compatible with Hotpoint, RCA, and select Kenmore models.

This inside gasket clamp secures the appliance's inner door gasket, helping maintain a tight seal and reduce leaks. It's a small but important retaining clip used where the gasket meets the door or opening. What it does:

• Holds the inner edge of the door or tub gasket in place to keep the seal seated
• Helps prevent water or air from leaking around the door during operation
• Restores proper gasket alignment when a worn or broken clamp allows the gasket to shift
• Works as a replacement for damaged or missing gasket retaining clamps

• One gasket inside clamp (single clamp as shipped)

• Recommended to inspect the gasket and surrounding trim for wear before installing the clamp
• Remove power and water (if applicable) to the appliance before servicing
• May require basic hand tools and careful prying to remove the old clamp and seat the new one
• If gasket is damaged or torn, replace the gasket as well for a reliable seal