Hbl0845uc/07 Parts

The Sensor is an OEM replacement part for Bosch ranges. It monitors conditions inside the oven compartment such as temperature and diagnosing faults. 

Symptoms of a bad sensor include:

• The oven not heating or cooking unevenly
• Inaccurate temperature readings displayed  
• Erratic or unpredictable ignition/operation  
• Error codes appearing related to sensor faults

Causes of failure can be normal wear over time from high heat exposure, accidental damage compromising sensor integrity, or intrusion of liquids or debris confusing readings.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore ranges.

The Lamp is an OEM part for Bosch ovens and ranges. It provides important visibility inside the oven cavity, allowing the user to easily view food placement and cooking progress without having to open the oven door. The lamp aids in monitoring oven temperatures as well as general food safety.

Causes of a bad oven lamp can include normal wear and tear over the life of the bulb, exposure to excessive heat, or physical damage.

Symptoms of a bad oven lamp include:

• The lamp not turning on when the oven is in use
• Flickering or intermittent lighting
• Premature burning out of the bulb
• Broken or loose lamp socket connections

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This Bake Element is an OEM part for Bosch Wall Ovens. It's responsible for generating heat for baking and cooking. Continuous exposure to high temperatures can cause wear or damage to this component.

What Causes a Bad Bake Element:
Repeated heating and cooling cycles, as well as exposure to high temperatures, can cause the bake element to deteriorate or fail.

Symptoms of a Bad Bake Element:

• Inconsistent oven heating
• Uneven cooking or baking
• The oven fails to reach set temperatures

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This halogen light bulb restores bright, reliable illumination in your appliance so you can clearly see the cooking area or interior. Replace a burned-out or flickering bulb to maintain visibility and safe operation. What it does:

• Provides illumination inside the appliance or over the cooking surface
• Replaces a failed halogen lamp to restore proper lighting
• Typical symptoms: light won't turn on, is dim or flickers, or works intermittently
• Helps you monitor food and check progress without guesswork

• 1 halogen lamp

• Disconnect power/unplug and allow the bulb and surrounding area to cool completely before service
• Access the lamp per your model's instructions; remove any lens or cover carefully
• Handle the new halogen bulb with gloves or a clean cloth; avoid touching the glass capsule
• Match the bulb type and rating specified for your model; do not exceed the rated wattage

The Light Lens Wall Oven is an OEM part specifically designed for Bosch wall ovens. As a key component of the oven's interior lighting system, the light lens works to illuminate the baking chamber. It provides critical visibility to monitor food items during the cooking process.

Symptoms of a bad light lens can include clouding or discoloration of the plastic material reducing light transmission over time. Cracks or detachment from normal use are also causes for replacement. 

Symptoms of a failed light lens include:

• Diminished or inefficient lighting of the oven interior
• Hot or cold spots within the oven due to poor visibility 
• Possible melting or scorching of food items without consistent light

This OEM Bosch replacement part restores full illumination for effective use of the wall oven. It is also compatible with Thermador, Gaggenau, and some Kenmore wall oven models.
 

This door seal restores a tight barrier between the oven door and cavity. Replacing a worn gasket helps your oven reach and hold temperature, reduces heat escaping at the door edges, and supports more consistent baking and roasting results.

• Creates a heat-resistant seal around the oven opening
• Helps the oven preheat and maintain set temperature
• Limits heat, steam, and odors from escaping at the door
• Typical signs it needs replacement: visible tears or flattening, heat felt around the door, longer preheat/cook times, or uneven baking

• Disconnect power at the breaker and let the oven cool completely
• Open the door, pull the old seal from its channel, and clean the groove
• Press the new seal evenly into the channel without stretching; ensure corners seat fully
• Close the door to verify uniform contact all around and adjust as needed

This factory replacement heating element restores proper heat during operation. When the original element is burned out or damaged, installing this part brings temperatures back to spec for reliable cycle performance and effective cleaning, drying, or heating results. What it does:

• Heats water or air to the target temperature as designed by the appliance
• Common symptoms include no heat, lukewarm operation, extended cycle times, poor drying results, or heating-related error codes
• Electrical connections match the original layout on applicable models
• Built to original specifications for consistent, even heating

• 1 heating element

• Disconnect power before servicing; shut off water supply if applicable
• Allow the appliance to cool completely before handling the element
• Note wire orientation and terminal positions; transfer any reusable seals or brackets from the original
• After installation, check for leaks and run a test cycle to ensure proper heating

The Fan is an OEM component specifically designed for select Bosch built-in ovens. As a critical convection element, it circulates internal air currents for optimal heat distribution throughout baking and broiling cycles.

Powerful yet precisely balanced centrifugal motion agitates spacious oven cavities with homogeneous warmth. Aerodynamic fan blades expedite even cooking without hot or cold spots. 

Causes requiring replacement relate to bearing seizure or broken blade attachments disrupting designed circulation. Prolonged heat exposure may cause premature motor failure or cracked housings to no longer sustain needed speeds.

Symptoms signaling the need for a new fan include:

• Inability to effectively circulate air for simultaneous multi-rack cooking  
• Louder than average operation noise accompanied by vibration
• Erratic or ineffective temperature management within cycles

This OEM Bosch replacement fan is also compatible with Thermador, Gaggenau, and some Kenmore built-in ovens employing convection methods. Proper reinstallation restores designed air transfer capabilities for perfect results.
 

This replacement part is an oven control board. The oven control controls the main functions of the oven, such as turning the oven on, maintaining and adjusting temperature, as well controlling the digital display. If the oven isn't turning on or heating properly, it might be time for a new control board. Replacing the control board is a simple job. First, make sure the range is unplugged. Then access the back of the oven and remove the upper back panel. Locate the old control board and take note of the orientation of the wire connections. Remove the wire harness and any individual wires attached to the old board. Then secure the wires into the new board in the correct order. Snap the new board back in place, and reinstall the upper back panel.This OEM part is compatible with Bosch, Gaggenau, and Thermador ovens and is sold individually.

The Oven Door Seal is an OEM part for Bosch ovens and ranges. This door seal fits snugly around the outer edge of the oven door to provide an effective air seal when closed.

Causes of a bad door seal can include damage from normal wear and tear over time, compression from repeated opening and closing of the door, or heat exposure leading to cracking or warping.

Symptoms of a bad door seal include:

• Inefficient or slow heating
• Inability to maintain set oven temperature
• Increased energy costs
• Smoke escaping around door edges when baking

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement glass panel restores the smooth, protective surface on the appliance when the original panel is cracked or broken. It helps maintain a clean appearance while shielding the components mounted behind the glass. What it does:

• Forms the visible glass surface on the appliance
• Protects internal components from spills and debris
• Restores a clean, finished look after breakage or heavy scratching
• Common fix for cracked, chipped, shattered, or missing glass

• 1 glass panel

• Disconnect power (and gas, if applicable) and allow the unit to cool completely
• Wear cut-resistant gloves; handle glass carefully
• Transfer any brackets, trim, or seals from the original panel as instructed
• Do not overtighten fasteners; verify proper alignment before restoring power

This convection fan motor drives the oven's internal fan to circulate hot air during convection cooking. Replacing a weak or seized motor restores proper airflow for more even heating, reliable temperatures, and consistent baking and roasting results.

• Powers the convection fan to move heated air across racks for even cooking
• Helps maintain stable cavity temperature and quicker recovery after door openings
• Common symptoms of a failing motor: fan won't turn, intermittent start/stop, loud squeal or grinding, uneven baking/roasting, or a fan-related error

• Disconnect power at the breaker before servicing
• Access from the rear of the unit or through the oven cavity (model dependent); remove the appropriate panel to reach the motor
• Note wire positions and motor orientation; transfer any brackets, grommets, or screws from the original if needed
• Ensure the fan blade spins freely and is properly seated before reassembly

Restore clear visibility inside your oven with this oven lamp assembly. It replaces a failed or damaged light unit so you can check cooking progress without opening the door and losing heat.

• Illuminates the oven cavity during baking and broiling
• Replaces a cracked lens, burned socket, or damaged lamp housing
• Can help fix a light that won't turn on, flickers, or is intermittent
• Maintains visibility without repeated door openings

• Disconnect power at the breaker and allow the oven to cool completely before service.
• Remove oven racks for working space; access the lamp area per your model's service instructions (from inside the cavity or the rear panel).
• Handle glass components carefully; if transferring a bulb, avoid touching the glass directly.
• Restore power and test the light before reinstalling racks and returning the oven to service.

This control module is the appliance's main electronic control board. It interprets inputs and energizes components to run the correct sequences, restoring reliable operation when the original board is unresponsive, intermittent, or damaged. What it does

• Coordinates timing and operation of motors, valves, heaters, and other loads
• Monitors inputs from switches and sensors to make decisions
• Distributes power and controls relays/outputs to components
• Common failure symptoms: won't start, controls unresponsive or erratic, stops mid-cycle, or shows error codes

• 1 control module

• Disconnect power before servicing; electronic boards can carry residual charge
• Use ESD precautions; handle the board by the edges and avoid touching components
• Document wiring; move connectors one at a time and ensure they are fully seated and keyed correctly
• Secure the board and any ground straps; reassemble, restore power, and run the model's service/diagnostic test if applicable

This door latch secures the appliance door and helps enable normal operation by keeping the door closed and latched during cycles. Replacing a worn or broken latch restores proper door engagement and reliable start/lock behavior. What it does:

• Secures the door closed so the appliance can run and complete cycles
• Engages with the strike to maintain a tight, consistent seal during operation
• Helps the control detect a closed/locked door and permit cycle start
• Commonly replaced when the door won't stay closed, won't lock, or the unit won't start

• One replacement door latch

• Disconnect power and water before beginning any repair
• Access may require removing the inner door panel or front trim—keep fasteners organized
• Verify alignment of the latch and strike before reassembly to ensure proper engagement
• If the latch has electrical connectors, reconnect securely and avoid pinching wires

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.