Hrb15n3bgs Parts

The Fresh Food Thermistor is an OEM part for GE refrigerators. It monitors and helps regulate the fresh food compartment temperature through precise measurements. Proper cooling and food preservation rely on an accurate thermistor reading.

Causes of failure can be microfractures in the glass bulb from sudden temperature changes, loose wiring connections preventing digital communication over time, or fluid intrusion corroding circuit pathways.

Symptoms of a defective fresh food thermistor include:  

• Inability to maintain a consistent temperature setting  
• Strange odors or icing up inside the fridge
• Temperature display showing an inaccurate readout

Replacing with this genuine GE thermistor restores dependable thermal regulation. Compatible with Hotpoint, RCA, and Kenmore brands, it supports consistent fridge performance.
 

The User Interface Display is an OEM part for GE refrigerators. As the central control panel, it allows for at-a-glance monitoring of temperatures and cycles through menus to customize refrigerator settings. 

Symptoms of a defective interface display include:

• Blank or unresponsive touchscreen  
• Frozen or glitchy menu navigation
• Dimmness that makes readings difficult

Causes can be due to impact cracks in the glass panel, faulty ribbon cables preventing communication to the motherboard, or water intrusion shorting internal components.

Replacing with this genuine GE display facilitates simple adjustments and feedback. Designed for lasting durability, it ensures dependable control for Hotpoint, RCA, and Kenmore branded units as well.

This inverter is the compressor drive module that controls variable-speed compressor operation to regulate refrigerator cooling. Replacing a failed inverter restores proper compressor control and helps the refrigerator maintain stable temperatures. What it does:

• Converts and regulates power to the compressor motor for variable-speed operation
• Helps the fridge adjust cooling output to maintain consistent temperatures
• Can cause cooling loss or compressor failure symptoms when faulty
• Common symptoms: refrigerator not cooling, compressor not starting or intermittently stopping, or error codes related to inverter/drive

• One inverter

• Disconnect power before servicing to avoid shock or component damage
• Handle the module and connectors carefully—avoid static discharge and contact with circuit traces
• Installation typically requires access to the compressor area/power board and secure mounting of the inverter

The R600 Process Valve with Red Cap is an OEM part for GE refrigerators. It regulates the flow of refrigerant within the cooling system, ensuring proper cooling and temperature control.

A bad process valve can occur due to wear and tear, refrigerant leaks, or mechanical failure. If you notice symptoms such as inadequate cooling, excessive frost buildup, or unusual noises coming from the refrigerator, it may indicate a faulty or malfunctioning process valve.

Symptoms of a bad process valve include:

• Inadequate cooling or inconsistent temperature control
• Excessive frost buildup in the freezer
• Unusual noises coming from the refrigerator

Restore your refrigerator by replacing the faulty process valve with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This damper gasket seals the air damper assembly to help maintain proper airflow and temperature control inside the refrigerator. It restores a tight seal around the damper so the fridge can cycle correctly and reduce air leakage. What it does:

• Seals the damper housing to prevent cold air from bypassing or leaking into the wrong compartment
• Helps maintain consistent internal temperatures and reduce frosting in the damper area
• Can reduce overworking of the compressor caused by air loss through a damaged gasket
• Addresses symptoms like uneven cooling, excess frost near the damper, or visible air gaps around the damper opening

• One damper gasket

• Disconnect power to the appliance before beginning any repair
• Remove damper housing or access panel as required to reach the gasket; handle plastic parts carefully to avoid cracking
• Ensure mating surfaces are clean and dry, then seat the gasket fully into the damper flange for a proper seal
• If any additional parts (clips, screws, or the damper assembly) are damaged, replace them as well to ensure correct fit and function

This freezer door gasket is the replacement door seal that helps keep cold air in and moisture out so your freezer holds temperature and operates efficiently. It restores a tight seal around the freezer door. What it does:

• Forms an airtight seal around the freezer door to help maintain proper internal temperature.
• Reduces frost buildup and prevents warm, moist air from entering the freezer.
• Helps reduce compressor runtime caused by a leaking door seal.
• Fits along the door perimeter and engages when the door is closed for consistent contact.

• Verify this part number matches the one on your appliance before ordering.
• Clean and dry the door frame surface before installing to ensure a proper seal.
• Gasket typically presses or snaps into the door channel; gently work around the perimeter for an even fit.
• For safety, unplug the appliance before any service.

This drain tube routes defrost and condensation water away from the refrigerator compartment to the drain pan, helping prevent water pooling and freezer or fresh-food section leaks. It replaces a cracked, pinched, or deteriorated factory drain hose. What it does:

• Channels defrost and condensation water from the evaporator area to the drain pan
• Prevents water from pooling inside the freezer or refrigerator cabinet
• Restores proper drainage when the original tube is cracked, split, or clogged
• Helps reduce odors and ice buildup caused by standing water

• Disconnect power to the appliance before starting any work.
• Remove access panels or shelving as needed to reach the evaporator/drain area.
• Inspect and clear the drain path and drain pan of debris before installing the new tube.
• Reassemble panels and restore power; run a short defrost or pour warm water to confirm proper flow.

This replacement door closure magnet helps the refrigerator/freezer door stay sealed for reliable cooling and energy efficiency. It restores normal door contact when the existing magnet is weak or damaged. What it does:

• Provides magnetic attraction to keep the door or inner assembly closed
• Helps maintain proper seal to prevent warm air infiltration and temperature loss
• Commonly linked to symptoms like a door that won't fully latch, warm compartments, or increased run time
• Simple passive part with no electrical connections

• Disconnect power to the appliance before beginning any work
• Remove any door panels or trim necessary to access the magnet; keep fasteners organized
• Handle carefully—magnets can snap together and pinch skin or damage nearby components
• Test door closure after installation; replace any damaged trim or retainer pieces that affect magnet alignment

This replacement refrigerator door bin gives you a secure shelf for bottled and boxed items, restoring usable storage and organization to the door. Durable molded plastic is shaped to hold items upright and keep them accessible. What it does:

• Replaces a cracked, chipped or missing door shelf so bottles and containers stay securely in the door
• Restores the door's original storage layout for easy access to frequently used items
• Prevents items from shifting or falling when opening and closing the door
• Matches OEM fit and mounting points for a snap-in install on compatible doors

• One refrigerator door bin

• Remove all items from the door and work with the door open on a stable surface
• Most installs are snap-in/removable—line up mounting tabs and press into place until it clicks
• If screws or retainer clips are present, retain and reuse or replace with OEM parts
• Unplug or disconnect power if you must work inside the refrigerator cavity; follow basic safety precautions

This is a single ST3.9 x 16 appliance screw used to secure panels, trim and small components. It replaces a lost or damaged fastener so parts stay aligned and appliances operate quietly and safely. What it does

• Fastens small sheet-metal and plastic appliance components.
• Holds control panels, trim, brackets or insulation in place.
• Prevents rattling, misalignment or loose panels caused by missing or worn screws.
• Matches OEM thread size and length for correct fit where specified.

• Use the correct driver and match thread engagement to avoid stripping.
• Start threads carefully and do not overtighten; stop when snug.
• Disconnect power before working on electrical components or panels where wiring is present.
• If replacing multiple fasteners, use the same thread type and length for consistent fit.