Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more
The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.
Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running.
Symptoms of a bad Door Interlock Switch include:
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are... Read more
The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.
Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.
Symptoms of a faulty monitor switch include:
This genuine GE switch is also compatible with select Hotpoint and RCA models.
The Halogen Lamp is an OEM replacement part for GE microwaves. It provides optimal interior light for monitoring food as it cooks. Consistent illumination supports convenience and usability.
Causes generally involve standard wear of the lamp coil and filament from heat and electromagnetic forces during operation. Accidental damage is another potential issue.
Symptoms of a bad halogen lamp include:
This GE OEM replacement is compatible with some Hotpoint, RCA, and Kenmore models.
The light inside the microwave oven was out. I could not see where it was and how to get at it because the inside is a continuous box. Went online to youtube for my oven model and sure enough a very well made demonstration of how to replace the light bulb was there. Found the part number from AppliancePartsPros.com, ordered, and in a few days the new bulb was there, and it was easy to replace. Read more
Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.
Charcoal filter removes smoke, odors, and grease in over-the-range microwaves with recirculating vents. Replace every 6-12 months for optimal performance.
No repair Read more
Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.
Ordered two new bulbs and replaced them. The lights have two settings and only one bulb was working on the dimmest setting. The repair was easy. The new lights are so bright and arrived quickly. I will definitely order again. Read more
Microwave not heating? The magnetron generates the radiation that cooks food. Moderate DIY repair—discharge capacitor first, then swap 3 screws.
14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more
Filters grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or every 6 months. Confirm fit with your model number.
Installed both filters in minutes. Filters were a perfect fit. Read more
Microwave not heating? High voltage capacitor stores energy to power the magnetron. DIY repair typically takes 30-60 minutes with proper safety care.
I took the advice of another buyer and replaced the magnetron, capacitor, and diode from my microwave (make sure you discharge the capacitor). It was not a problem at all to do, I did find an excellent video on YouTube on how to test all of these components and almost anything else in a microwave. It’s called Microwave Oven Troubleshooting in Minutes- Step by Step by electronicsNmore. It was the best thing I watched. Turns out my magnetron was the only thing that was bad and it’s the most... Read more
Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.
I ordered the replacement lens from AppliancePartsPros.com. They shipped it quickly and when the part cam in I just swapped it out for the broken lens. Read more
Halogen bulb illuminates your microwave interior for monitoring food while cooking. Replace when burned out or dim. Verify bulb base type for fit.
Followed the instructions found on the web, and replaced the part. Super-easy. Read more
The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.
Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.
Symptoms of a bad Mounting Plate include:
Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.
Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.
Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Connects microwave ventilation system to ductwork. Mounts at top or rear of unit. Replace if cracked, broken, or missing for proper airflow.
This damper was added to the outside vent duct line as an additional block against outside air intrusion. Under spousal orders I had just changed the microwave vent to the outside (the proper way to go, but much more difficult to accomplish) but then there was some "flowback" when the wind was pressing against the back of the house (westward facing), and I was ordered to reduce this flow before the winter arrived in full force. There is this same damper on the microwave unit itself, but I... Read more
Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.
I recently tackled a repair on my GE microwave (model JVM1440BD003, manufactured in 2003) to replace the light bulb sockets for the under-microwave lights. Since one socket was failing, I decided to replace both at the same time to avoid future issues. I used two WB08X10016 light sockets, which are the correct OEM parts for this model. The process started off smoothly thanks to a helpful installation video on the website. It made the job look straightforward: remove five screws to drop the... Read more
Traps grease, smoke, and cooking residue to protect microwave interior surfaces. Replace when damaged or heavily stained. Verify fit with your model.