Mre6765baq17 Parts

This temperature sensor kit replaces a failed refrigerator temperature sensor to restore accurate temperature monitoring and help the control board maintain proper cooling. It's designed for service replacement and OEM fit. What it does:

• Monitors internal compartment temperature so the refrigerator control can regulate cooling cycles.
• Helps prevent overcooling or warming caused by a faulty or open sensor.
• Common symptom fix: refrigerator/freezer running too warm or too cold, or erratic cycling.
• Clears temperature-related error codes when installed in place of a defective sensor.

• Disconnect power to the appliance before starting any repair.
• Handle sensor tip and wiring gently; avoid sharp bends or pinching the harness.
• Route and secure the sensor wiring per OEM locations to ensure correct readings.

This is a replacement cooling fan assembly designed to restore airflow in the refrigerator condenser/vent area for stable temperatures and improved efficiency. Fits service replacement applications where the original fan is damaged or fails. What it does:

• Circulates air across condenser/evaporator components to help maintain proper cooling
• Reduces overheating by improving airflow through heat-exchange areas
• Stops symptoms such as weak cooling, warm spots, or a non-spinning fan
• Helps eliminate abnormal fan noise when the motor or blades are failing

• Disconnect power to the appliance before any service to avoid shock or injury
• Access may require removing panels or shelving; keep fasteners and clips for reassembly
• Handle the fan blades and motor carefully to avoid bending or damage
• If wiring connectors or mounts are worn, replace or secure them during installation

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

This thermal cut-off switch is a high-temperature safety device that interrupts power if the appliance overheats. Replacing a failed cutout restores proper overheat protection and can help address no-heat or shutdown issues caused by an open safety circuit.

• Monitors temperature at its mounting location and opens the circuit if temperatures exceed a safe limit
• A failed/open cutout can cause no heat, intermittent heating, or the unit shutting off during use
• Helps protect components from damage due to overheating
• Location varies by model; typically mounted to a bracket or surface near a heat source

• Disconnect power at the breaker or unplug the appliance before servicing
• Note wire orientation and transfer leads one at a time to the new switch
• Mount in the original position with firm, flush contact for accurate temperature sensing
• After replacement, inspect airflow/venting and nearby fans/filters to address any underlying overheating causes

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

This broil element heats the top of the oven for broiling and browning, restoring high-heat performance for searing and finishing dishes. Designed to replace a failed or damaged upper heating element. What it does

• Heats from the top of the oven to brown, sear, and broil foods
• Replaces a visibly burnt, broken, or non-heating upper oven element
• Helps fix symptoms such as no broil heat, uneven browning, or visible arcing/sparking
• Works with standard terminal connections used on compatible Samsung ranges

• One broil element (upper oven)

• Disconnect power to the appliance before attempting any service
• Handle element carefully to avoid bending or damaging the tubular element
• Verify terminal connections match your oven and tighten hardware securely

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.

The 2000W Heater Assembly for Series 8 Walk-Behind Lawn Mower is designed to ensure your mower operates efficiently even in cooler conditions. This genuine OEM part guarantees a perfect fit for your Series 8 walk-behind lawn mower, maintaining the mower's performance and reliability. With its powerful 2000W heating capacity, the heater assembly effectively warms the engine area, helping to prevent cold-related issues and ensuring smooth starts during early mornings or chilly days. Constructed from high-quality materials, this heater assembly is built to last, providing consistent heating and reducing the risk of engine strain. Installation is straightforward, allowing you to replace a damaged or faulty heater without the need for professional assistance. By choosing this genuine OEM part, you can be confident in the compatibility and durability of the replacement, ensuring your lawn mower remains in top working condition. Enhance your mowing experience and extend the life of your Series 8 Walk-Behind Lawn Mower with this reliable and efficient heater assembly.

The Hinge Storage Panel for Electronic Sewing Machines is designed to enhance the functionality and organization of your Samsung electronic sewing machine. This genuine OEM part ensures a perfect fit, seamlessly integrating with your appliance to restore its original performance. Crafted from durable materials, the hinge storage panel provides a reliable solution for storing essential sewing accessories, keeping your workspace tidy and efficient. Installing the Hinge Storage Panel is straightforward, allowing you to quickly replace a cracked, missing, or damaged panel without the need for professional assistance. Its robust construction not only supports the weight of your sewing machine parts but also maintains the structural integrity of your appliance. By choosing this genuine OEM part, you can be confident in its quality and compatibility, ensuring long-lasting use and optimal performance of your Samsung electronic sewing machine. Whether you're a seasoned sewing enthusiast or just starting, the Hinge Storage Panel offers a practical way to organize your tools and accessories. Enhance your sewing experience by maintaining a well-organized and fully functional machine with this essential component.