Wl42t26dw1 Parts

A set of molded straight straps used to secure internal components and routing in compatible Fisher & Paykel appliances, helping stop loose parts and reduce vibration. Sold as a pack of four identical straps for straightforward replacement. What it does:

• Secures hoses, wiring, or small components to keep them from shifting during operation.
• Restores factory mounting points to help prevent rattling, chafing, and intermittent contact.
• Simple replacement part that reinstates proper routing and fit.
• Useful when worn, cracked, or broken straps allow parts to move or vibrate.

• Disconnect power to the appliance before starting any service.
• Remove only the access panels needed to reach the old straps; retain any fasteners for reuse unless damaged.
• Replace straps one-for-one and ensure routed components sit securely; do not overtighten or deform straps.

This suspension kit replaces worn tub suspension cushions to restore proper support and reduce washer vibration and noise during cycles. Designed as a like-for-like replacement kit for affected Fisher & Paykel top-load tubs. What it does:

• Replaces worn suspension cushions that support the washer tub during agitation and spin.
• Helps reduce excessive vibration, shaking, or thumping during spin cycles.
• Restores even tub movement to improve stability and help prevent off-balance spins.
• Works where compressed, cracked, or missing suspension mounts allow excess tub movement.

• Includes four suspension cushions (4-piece kit).

• Disconnect the washer from power and water before starting any repair.
• Support the tub or cabinet while replacing suspension cushions to prevent sudden movement.
• Remove applicable panels and follow OEM service instructions for safe access and correct orientation.

This elbow nozzle directs wash water to the dishwasher spray assembly to help deliver targeted cleaning inside the tub. It restores proper spray direction so dishes and utensils get rinsed more effectively. What it does

• Channels water flow from the pump to the spray arm or distribution tube.
• Restores proper spray pattern when a cracked or clogged nozzle causes weak or misdirected spray.
• Helps prevent pooling and poor cleaning in hard-to-reach areas of the tub.
• Compatible with systems using the SD3-style elbow connection.

• One elbow nozzle

• Disconnect power and water supply to the appliance before starting any repair.
• Remove the lower spray arm or access panel as needed to reach the nozzle; follow your model's service instructions.
• Inspect adjoining hoses, clips, and fittings for wear and replace if damaged.

The Kit Bearing Lipseal is an OEM part for Fisher & Paykel front-loading washing machines. It contains 2 replacement bearings and a seal found inside the wash tub. These components work together to allow for smooth rotation of the tub during cycles while preventing water leaks through aging seals.

Symptoms of a failed kit bearing lipseal are: 

• Noisy or grinding sounds emanating from the wash tub area
• Vibration issues noticed during spin cycles
• Water leaks found inside or below the washing machine

Causes of faulty bearings or lipseals include normal wear from years of operation. Mineral buildup can accelerate deterioration within seals over time as well.

This Nozzle Spray Fill Assembly is an OEM part for Fisher & Paykel washing machines. This assembly is integral to the proper distribution of water within the washer during the fill and rinse cycles. 

Issues with the nozzle spray fill assembly can occur due to clogging from mineral deposits, wear and tear, or mechanical damage. A compromised assembly can lead to uneven water distribution, impacting the washer's effectiveness.

Symptoms of a bad nozzle spray fill assembly include:

• Inadequate water flow during the fill cycle.
• Uneven or insufficient wetting of clothes during the wash cycle.
• Prolonged fill times indicate restricted water flow.
• Water spraying unevenly or in an unusual pattern.
• Noticeable leaks or drips from the nozzle area during operation.

This OEM Fisher & Paykel part is also compatible with Bertazzoni, Dacor, and Viking brands.
 

A replacement Miflex-style hose inlet that connects the appliance to the water supply and provides a secure, flexible water entry point. Helps restore proper water flow and prevents leaks from a worn or damaged inlet connection. What it does:

• Provides a sealed connection between the household water line and the appliance inlet
• Allows flexible routing of the water supply to reduce strain on fittings
• Fits where a Miflex-style inlet hose/assembly is specified by the manufacturer

• Turn off water supply and unplug the appliance before removing or installing the inlet
• Inspect hose and fittings for wear; replace any damaged clamps or gaskets for a secure seal
• Hand-start threads to avoid cross-threading, then tighten per manufacturer guidance

The Lid Lock and Harness Assembly is an OEM part for Fisher & Paykel washing machines. It utilizes a locking mechanism and wiring harness to securely maintain the washer lid shut during cycles. Preventing water leaks is a top priority.  

Symptoms of an insufficient lid lock and harness assembly include:

• The washer lid popping or swinging open during cycles
• Water leaks emerging around the lid  
• An inability to reliably lock the lid closed for the duration of cycles

Causes of a failed lid lock can include normal wear of moving parts from frequent use. Mineral buildup in hard water areas can corrode lock components over time as well.

This thermistor assembly service kit replaces a failing temperature sensor to restore accurate temperature monitoring and control. Ideal for systems that need a direct-replacement sensing element and connector harness. What it does:

• Senses internal temperature and sends a signal to the control board for proper cooling/heating regulation.
• Commonly used when a unit reports incorrect temperature, runs too long, cycles frequently, or shows related error codes.
• Helps prevent overcooling or insufficient cooling caused by a faulty sensor.
• Replaces a damaged or intermittent thermistor connection that can cause inconsistent performance.

• One thermistor assembly service kit (sensor with attached harness/connector as pictured)

• Disconnect power before starting work to avoid shock or equipment damage.
• Handle the sensor and wiring gently; avoid touching the sensing tip with bare hands or contaminating it.
• Route and secure the harness to match the original path; ensure connectors fully seat.

This spline drive kit replaces the worn drive spline that transfers motor torque to the appliance drivetrain, restoring reliable rotation and engagement. Use when the drive slips, hesitates, or makes grinding or rattling noises. What it does:

• Re-establishes positive spline engagement between motor and driven components
• Stops slipping or intermittent rotation caused by worn or damaged splines
• Reduces grinding, clicking, or vibration from a compromised drive connection
• Helps restore normal operation of the appliance's drivetrain

• Disconnect power (and water if applicable) before starting any repair
• Basic hand tools required; avoid forcing parts into position
• Inspect mating parts for wear; replace damaged components to prevent repeat failure
• Test unit after installation to ensure proper engagement and quiet operation

The Agitator Bolt is an OEM part for Fisher & Paykel washing machines. This bolt secures the agitator hub to the lower agitator bearing. It bears significant rotational force to power agitation during washing cycles.

• Symptoms of a bad agitator bolt can include:
• Loose, wobbly, or detached agitator assembly
• Vibration and noise coming from the agitator area
• Reduced or ineffective agitation during wash cycles

Causes of a bad agitator bolt include stripping or wear of threads over time and use, shearing from continuous high torque loads, or damage such as cracking from impacts.

This cap and bolt kit replaces a damaged or missing cap and its mounting bolt to restore a secure fit and finish. It helps stop loose trim or rattling and keeps the appliance looking complete. What it does:

• Replaces worn, cracked, or missing cap and its matching bolt
• Secures trim, panels, or covers to reduce movement and vibration
• Restores finished appearance where a cap was lost or damaged
• Can reduce noise from loose components when properly installed

• One cap and one bolt supplied as a single kit

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; align parts before tightening to avoid misthreading
• Tighten bolt snugly but do not overtighten to prevent damage to the cap or mounting surface

The Dryer Leveling Leg is an OEM part for Fisher & Paykel dryers. It securely elevates and stabilizes the dryer unit on any floor surface. The leveling leg allows for balance, and level adjustment, and protects against moisture concerns.

Symptoms of an insufficient leveling leg include: 

• Dryer rocking or wobbling noticeably during operation
• Premature wear of internal tumbler bearings  
• Vents or doors failing to seal properly

Causes of a faulty leveling leg can be damaged from repositioning the heavy dryer on uneven flooring. Over time, repeated stress leads to fractures of mounting points. 

The Drive Shaft Kit is an OEM part for Fisher & Paykel washing machines. It is essential for the spinning function of the drum, enabling efficient washing and spinning cycles. Proper functioning of the drive shaft ensures smooth operation and effective cleaning performance.

Causes of a bad drive shaft typically involve wear and tear from regular use, bearing failure, or damage from overloading the machine.

Symptoms of a failing Drive Shaft Kit can include:

• The washer making unusual noises during the spin cycle.
• The drum failing to spin or spinning erratically.
• Increased vibrations and instability during operation.
• A noticeable decrease in washing performance due to the drum not reaching necessary speeds.

This is a stainless steel #8 x 5/8" Phillips screw sold in a pack of 10 — a direct-fit fastener for appliance panels, brackets, and trim. Durable corrosion resistance helps maintain secure assemblies over time. What it does:

• Fastens panels, brackets, trim pieces, and other appliance components using a Phillips driver
• Stainless finish resists rust and corrosion in humid or wet appliance areas
• Sized for common appliance mounting points where #8 x 5/8" screws are specified
• Helps restore loose or missing fasteners that cause rattling or poorly seated panels

• Ten (10) stainless steel #8 x 5/8" Phillips screws

• Use the correct #2 Phillips bit and moderate torque to avoid stripping the head or damaging mating parts
• Tighten until snug; do not overtighten plastic components
• Disconnect power to the appliance before accessing internal panels or wiring
• Keep loose screws away from children and dispose of packaging responsibly