Zgg36n31c1ss Parts

This is a GE radiant heating element. This radiant heating element is designed to be installed in several models of GE gas grills. The radiant heating element is the source of heat for the range portion of the grill. The assembly consists of the grill grate, the heating element, and the reflecting pan, which adds another heat level to optimize cooking. When this heating element goes out, the griddle/range portion of the grill will no longer operate efficiently. This loss of power may take place over a long period or happen all at once. Inspect the component for any debris or grease buildup when malfunctions take place. Buildup from food by products could cause the element not to operate correctly.Before beginning any repairs or installations, always disconnect the grill from any gas sources. Use gloves to avoid accidental cuts or scrapes from handling the sharp edges of the grill grate and reflection pan. Remove the old unit by disconnecting it from the gas line to access the main tank. The heating element can be accessed by lifting the grill grate. The element is directly beneath the grate, which can also be easily removed. This is a genuine OEM product and is sourced directly from the manufacturer. This product is designed exclusively for GE products.

This heat shield protects the oven cavity and surrounding components from excessive heat, helping prevent damage and maintain safe operation. It fits where the original shield has become warped, corroded, or missing. What it does:

• Redirects and absorbs oven heat to protect nearby wiring, insulation, and cabinet panels
• Helps maintain proper internal temperature distribution for safer, more reliable operation
• Prevents heat-related damage that can cause discoloration, melting, or premature component failure
• Commonly replaced when the shield is dented, rusted, or loose and no longer secures correctly

• Disconnect power (and gas if applicable) before beginning any repair
• Wear work gloves and eye protection; edges may be sharp
• Compare the new shield to the original for correct orientation and mounting hole alignment

Replacement H-shaped surface gas burner for select GE ranges that restores proper flame distribution and cooking performance on the cooktop. Replaces damaged or warped H burners to help ensure even heating. What it does:

• Delivers gas to the H-shaped surface burner position to produce stable cooking flames.
• Restores even heat when a worn or damaged burner causes uneven cooking or low flame.
• Helps address symptoms like flickering or lifting flames, visible warping, cracks, or heavy corrosion.
• Serves as the direct replacement component for the H-style burner assembly on compatible gas cooktops.

• Turn off the gas supply and disconnect power to the appliance before beginning any work.
• Remove grates and burner caps to access the burner; handle parts carefully to avoid damage.
• After installation, check for steady ignition and test for gas leaks with a soapy-water solution—do not use an open flame.

Shoulder bolt for grills. Secures components in place with precise spacing. Replace if bolt is stripped, corroded, or missing to restore proper assembly.

If your grill won't light or has weak ignition sparks, this electrode restores reliable ignition. Simple fix for common lighting failures.

Fix a grill that won't light with this electrode igniter assembly. Restores reliable spark ignition to gas burners. Moderate DIY repair in 30-45 minutes.

Four-prong meat holder fork for grill rotisseries. Secures meat during rotation with 3/8-inch diameter prongs. Replace if bent, broken, or missing.

Fix weak flames or uneven heating on your gas cooktop with this natural gas pressure regulator. Controls gas flow for consistent burner performance.

This single grill rack replaces a worn or damaged 36" monogram-style grill rack to restore proper food support and even broiling. It installs in the grill cavity to hold cookware or food during high-heat cooking. What it does:

• Provides a sturdy surface for grilling and broiling inside the oven or grill cavity
• Allows hot air to circulate around food for more even cooking
• Replaces racks that are bent, warped, or rusted and no longer hold cookware securely
• Helps prevent food from slipping into the burner area or onto the grill floor

• One 36" single grill rack

• Allow the appliance to cool and disconnect power before replacing the rack
• Slide the rack into the existing support slots; no special tools normally required
• Inspect support rails for damage and ensure the rack seats evenly to avoid tipping
• Follow all safety instructions in your appliance owner's manual

Rotisserie mount base for your grill. Secures the rotisserie motor assembly. Replace if cracked, broken, or hardware won't stay secure.

Replace your grill's rotisserie mount knob if it's cracked, broken, or missing. This knob secures the rotisserie assembly to your grill for proper operation.

Fix uneven browning or a rotisserie spit that won't turn with this replacement motor. Powers automatic rotation for even cooking and self-basting.

Rotisserie burner orifice plug for natural gas grills. Replaces damaged, worn, or missing plugs to properly seal unused orifice openings.

Left side anti-flip bracket for grills. Secures the grill structure to prevent tipping. Replace if bracket is bent, cracked, or missing for safe operation.

This right-side anti-flip bracket helps secure the appliance door/assembly to prevent tipping or unexpected movement, restoring stable operation and safer use. Fits the original mounting points for a direct replacement. What it does:

• Anchors the appliance door/assembly to reduce upward or forward flipping during use
• Helps stabilize a door that tilts, binds, or does not stay seated when opening/closing
• Restores correct alignment between the door and cabinet/frame for smoother operation
• Works with factory mounting hardware and original bracket locations

• One right-side anti-flip bracket

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; keep track of screws and any removed trim pieces
• Disconnect power (and gas if applicable) before beginning work to avoid electrical or gas hazards