Doyle L Maurice , LA January 12, 2025 Wasn’t filling up Wife and I took the back off and changed the parts. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Keith G Hadley , MI January 22, 2025 No hot water going into washer Replaced the mix valve and pressure sensor, total of less than $40. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers, Socket Set
Urrvano G Rochester , MN January 03, 2026 Appliance: Model SPEED QUEEN AWN 63RSN115TW01 Intermittent issues with the cold water fill I replaced both the solenoid (part of the inlet valve kit) and the pressure sensor. Online research suggested my intermittent issue with the cold water fill being just a trickle and then causing an error was likely due to one or both of those two parts failing. Since they are in the same spot it was suggested (and I agree) that it is best to replace both at the same time. The hardest and most frustrating part was getting the bracket back on with the two bottom tabs being in place. It took multiple attempts, some choice words, a small cut from the sharp metal edges to the thing in place. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Pliers, Screwdrivers, Socket Set
Clint B Summerville , SC January 03, 2026 Appliance: Alliance Washer AWN432SP113TW01 Water dripping in washer Replaced the dual water valve. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Screwdrivers
John R Alton , IL January 18, 2026 Leaking water valve in speed queen washer Turned water lines off and drained,took front cover off, two screws, two screws hold the top on.Lift lid to access parts very simple job Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers